43 - Artemis P15 Review: Is This Air Rifle Worth Your Money?

Sdílet
Vložit
  • čas přidán 3. 08. 2024
  • In this quick review I cover the complete overview of the P15, focusing on its compact yet powerful design. I carry out live testing on my range, showcasing the significant noise reduction and the airgun’s performance with various pellets.
    Whether you're a seasoned shooter or new to airguns, this video is packed with insights that will elevate your airgun shooting experience. Got questions or your own tips to share? Drop them in the comments - let’s make our airgun community richer with shared knowledge!
    #airgun #airguns #airgunshooting #airrifles #airrifleshooting #HFT
    Remember to like, subscribe, and hit that notification bell to stay updated with all things airguns! See you in the next video!
    This video does not feature any firearms, only a low power air rifle that is not classified as a firearm under UK law and doesn't require a Firearms Certificate (license) to own! It is shown being used legally in a safe environment in full accordance with UK legislation.
    CHAPTERS:
    0:00 - Intro
    1:14 - Artemis P15 Specifications
    3:16 - Artemis P15 Shroud Features
    5:05 - Artemis P15 Charging Guide
    8:25 - Artemis P15 Magazine Setup
    9:33 - Artemis P15 Shooting Demonstration
    10:31 - Artemis P15 Chrono Test
    14:50 - Pellet Accuracy Testing
    24:09 - Shooting Chalk Men
    26:50 - Chrono Results Analysis
    28:40 - Target Shooting Results
    30:50 - Outro
    #airgun #airguns #airgunshooting #airrifles #airrifleshooting #hftshooting #hftshooter
  • Sport

Komentáře • 21

  • @johnnyhouston9913
    @johnnyhouston9913 Před 2 měsíci

    Cool video Jeff, another good watch for a Friday.. and I learned a few things to, so what's not to like.. have a great weekend.. ✌️👍🤟

  • @pjgtech
    @pjgtech Před 2 měsíci +1

    Thanx for the video, cheers

    • @hftshooter
      @hftshooter  Před 2 měsíci

      You're very welcome! 🙂👍

  • @Josef_R
    @Josef_R Před 2 měsíci +2

    I like how you have to look down the barrel to see the pressure gauge. Safety 101...

    • @hftshooter
      @hftshooter  Před 2 měsíci +2

      That is unfortunately the case in many cheaper rifles. However, if you've checked the rifle is unloaded, not cocked and the safety is engaged! 🙂

    • @Josef_R
      @Josef_R Před 2 měsíci

      @hftshooter Not blaming you for anything, just pointing out a stupid design that can lead to stupid behavior. It violates the first rule of firearms, never point it at anything you don't wish to kill.

    • @markhomer5704
      @markhomer5704 Před 2 měsíci +2

      Enjoyed that vid.. Probably needs an heavier hammer spring to get it that wee bit more power.. Nevertheless it's accurate enough..

  • @chrisjohn4101
    @chrisjohn4101 Před 4 hodinami

    This gun performs best at 200bar, the REG is of a basic design and does not like full pressure, treated correctly these will match any PCP on the market below £1k.

  • @Getting-Older
    @Getting-Older Před 2 měsíci

    Nice review, thanks for sharing. how do you find the scope for clarity?

    • @hftshooter
      @hftshooter  Před 2 měsíci +2

      It's actually a great little scope. Clarity is fine at 50 yards which I guess is all you need for sub12. 👍

  • @Yorkshire-Frank
    @Yorkshire-Frank Před 2 měsíci +1

    Picked mine up in the sale for £299. Quick clean of the barrel, slight adjustment of the trigger and it's spot on.
    Tinkered with the shroud internals and fitted a mini flat boy made by Bl4de.... it's as quiet as a mouse.
    Tweaked the hammer spring tension and use H&N FTT... run mine at 590fps, a spread of 5fps and std dev of 2.1fps.
    Shoots sub 20mm groups out to 35 yards.
    Mine's a keeper 👍🏻😂
    Great channel 👍🏻

    • @hftshooter
      @hftshooter  Před 2 měsíci +1

      You probably bought yours in the same sale I did. Certainly lends itself to some tinkering. I think mine could do with a bit more power. All the best! 🙂👍

  • @markprotheroe4057
    @markprotheroe4057 Před 2 měsíci

    mines putting pellets through the same hole at 30yds if i do my bit but i polished the barrel and recrowned it to achieve the accuracy.When i bought it the crown looked like it was done with a hammer and chisel.

    • @hftshooter
      @hftshooter  Před 2 měsíci

      I always planned to do a bit of fettling with mine. Looks like they're very easy to work on. But this has to go to pay for something else. 🙂

  • @user-me8ew1uk4q
    @user-me8ew1uk4q Před 9 dny

  • @gosbeskidu1929
    @gosbeskidu1929 Před 2 měsíci

    Use FAC version only.