Make more cooling required. Make a big hole in the bottom of the cowl, and a smaller prop. The engine is struggling to push that much thrust and that causes it to overheat. Very nice model though
Your comment is correct. The engine shut off due to heating. The engine is currently being repaired, and baffles are being installed on the cowl. Thank you very much for your interest. Have a nice day! 🙂
You need to: - open more holes for cooling the engine. - made baffling in front of cowl for better cooling of the engine heads. - change the propeller to avoid overheating of the engine.
Thank you for your kind comments. The combination of a Vario propeller and a Moki engine is a first for us. As you commented, we are going to make an additional air vent at the back of the cowl and install a baffle at the front of the cowl. Have a nice RC flight!!
@@team-mustang The idea of the vent and the baffle are ok. In my opinion, you have to testing it before with a standard 2 blade propeller. When you reach the optimum combination, you switch to Vario prop. Bye and good flights.
The guy flying the model looked like he was fighting it every second of the flight. Not smooth at all. He actually looks like he is way in over his head with that airplane. Thing is, a P-47 is one of the best flying, best behaving and easiest flying models there is. I hope he got some more training. I wonder how much damage he did when he stalled it at the end?
First of all, thank you for your interest. At the time, the pilot had no experience with Moki engines. The engine cylinder melted and stuck due to overheating. There was an emergency landing, which resulted in a problem with the landing gear. Currently, the landing gear has been replaced with a new landing gear, and minor scratches on the fuselage have been restored. And the Moki engine has been repaired. He plans to try flying soon. Have a nice day!!! 🙂
I wanted to show all the videos. However, the pilot asked for the last scene to be edited, so I had no choice but to cut the last scene. I hope you understand. Thank you very much for your interest! Have a nice day! 😅
Beautiful plane and engine. Nice save at the end.
Thank you! Have a nice day!
your engine had over 200 degrees!
that is the only reason why a Moki stops
Your comment is correct. Currently, the engine has been sent to the Moki company for repair. Thank you very much for your interest. 🙂
Make more cooling required. Make a big hole in the bottom of the cowl, and a smaller prop. The engine is struggling to push that much thrust and that causes it to overheat. Very nice model though
Your comment is correct. The engine shut off due to heating. The engine is currently being repaired, and baffles are being installed on the cowl. Thank you very much for your interest. Have a nice day! 🙂
You need to:
- open more holes for cooling the engine.
- made baffling in front of cowl for better cooling of the engine heads.
- change the propeller to avoid overheating of the engine.
Thank you for your kind comments.
The combination of a Vario propeller and a Moki engine is a first for us. As you commented, we are going to make an additional air vent at the back of the cowl and install a baffle at the front of the cowl.
Have a nice RC flight!!
@@team-mustang The idea of the vent and the baffle are ok. In my opinion, you have to testing it before with a standard 2 blade propeller. When you reach the optimum combination, you switch to Vario prop. Bye and good flights.
@@2m1986 We will follow your comments. Thank you very much. 👍
The guy flying the model looked like he was fighting it every second of the flight. Not smooth at all. He actually looks like he is way in over his head with that airplane. Thing is, a P-47 is one of the best flying, best behaving and easiest flying models there is. I hope he got some more training. I wonder how much damage he did when he stalled it at the end?
First of all, thank you for your interest. At the time, the pilot had no experience with Moki engines. The engine cylinder melted and stuck due to overheating. There was an emergency landing, which resulted in a problem with the landing gear. Currently, the landing gear has been replaced with a new landing gear, and minor scratches on the fuselage have been restored. And the Moki engine has been repaired. He plans to try flying soon. Have a nice day!!! 🙂
Nice
Thank you for your interest!! ✌🏻
what is the wingspan on this beautiful model?
244cm. 😊
🤟WOW
Thank you ✈️
Fly under that bridge
😅
Your flair was to high you must of stalled crashed, the reason you didn't show the end.
I wanted to show all the videos. However, the pilot asked for the last scene to be edited, so I had no choice but to cut the last scene. I hope you understand. Thank you very much for your interest! Have a nice day! 😅
it was doomed to crash from the moment it took off its wheels of the ground.. Obviously pilot's not skilled enough for a model of this level.