Unfortunately, I just did this to my p320, tried everything I knew to get it undone, thank God I found your video! Worked like a charm! Thank you, thank you thank you!!!
Thank you so much, I was ready to throw it away thinking I ruined my gun. I was following the video but was pushing the sear too far! Thanks again. Debi
This is a Natural Mistake with the P320's especially if you own a CZ, because the slide is installed then the take down lever is pushed in. All P320 owners should add this video to there Favorites. It will happen again. THANK YOU, THANK YOU VERY MUCH.
I replaced my takedown lever with the gas pedal from GoGun USA. It's so big and unsightly it might be hard to overlook? If it does happen then I'll know what to do. Thanks. Beautiful gun by the way?😍
Did a disassembly and cleaning before firing brand new like the Manual says did this very mistake was able to get slide off. After re assembly noticed slight movement rocking between upper and frame only if I press together at front and back didn’t notice before. Everything lines up. Seems tight as possible. This normal due to spacing?
No the take down lever is stuck at 4 o’clock position and slide won’t move forward or back. Not sure how you just lifted the whole slide out. Mine doesn’t do that.
@@garccon9 on mine the takedown lever is removed. That is the only way you’re removing the upper from the lower. You have to get that take down lever out of there.
But you can’t remove the td lever if the slide is closed. (Neutral position) Don’t know how I got the slide back on without the takedown lever being unlocked.
@@SigGuy Thats beautiful. I run an x carry and have looked into getting a bigger slide. How does that work with holsers? do you just shop for p320 rx/full size one?
You saved my backside with this, a few months ago. Keep up the good Sig Sauer content. Thanks from an old retired Navy veteran
🙏🏼
I saw this video when I first got mine and thought, psssh, that couldn't happen to me. I sit before y'all a humbled man lol. A livesaver this man is!
Haha. That is exactly how it always happens. Lol. I bet it won’t be the last time either haha. It gets me now and again. 🤙🏼
Man that saved me a lot of trouble with my x-five. Thanks a ton!!
ISurvivedTheVA haha. Anytime man. It happens to us all sooner or later!
Unfortunately, I just did this to my p320, tried everything I knew to get it undone, thank God I found your video! Worked like a charm! Thank you, thank you thank you!!!
Thank you so much, I was ready to throw it away thinking I ruined my gun. I was following the video but was pushing the sear too far! Thanks again. Debi
THANK YOU - just helped me figure out the most frustrating (and bone-headed) mistake I made...
Ha ha! I guarantee you won’t be the last time LOL. It happens to me still all the time because I’m in too much of a hurry.
That P320 though!!! Awesome!
Thank you… fixed my X Compact in no time
Thank you very much! I was in a panic!
Did this the very first time I took my m17 apart lol. Eventually figured it out. Now I don’t feel so dumb
Thanks for the information and like your setup!
Keanon Gilliam thank you sir.
This video saved my life.
Lol. Glad it got you out of a jam bud
Made my day !
Thank you!
Perfect!! Thank you Sir!
This is a Natural Mistake with the P320's especially if you own a CZ, because the slide is installed then the take down lever is pushed in. All P320 owners should add this video to there Favorites. It will happen again. THANK YOU, THANK YOU VERY MUCH.
KTM Keith thank you very much sir. Appreciate the compliment!
Thank you 🙏 a lot
Thank You !!
Douglax haha. It got you also eh?! Anytime brother.
God bless u
Thank you
I replaced my takedown lever with the gas pedal from GoGun USA. It's so big and unsightly it might be hard to overlook? If it does happen then I'll know what to do. Thanks. Beautiful gun by the way?😍
Did a disassembly and cleaning before firing brand new like the Manual says did this very mistake was able to get slide off. After re assembly noticed slight movement rocking between upper and frame only if I press together at front and back didn’t notice before. Everything lines up. Seems tight as possible. This normal due to spacing?
Arron Guinup normal
Thank you. Excellent work your videos are extremely helpful.
Will this work with California m18?
Do they make Faxon barrels for the X-Carry?
TwiztedNoodlezEnt not sure. You would have to visit their sight. Mine are all full-size
Godsend
i put my slide back on without the takedown lever but my trigger is stuck and the fcu wont come out of the grip module, any idea on what i can do ?
czcams.com/video/MZqAPIdLZLE/video.htmlfeature=shared
Did you stipple before or after the FDE?
Phil Baker not sure. The middle was done at 313 tactical.
How do you remove the barrel assembly from the grip model??? Mine doesn’t just lift out. If I could do that I would have a problem
And you are removing the takedown lever correct?
No the take down lever is stuck at 4 o’clock position and slide won’t move forward or back. Not sure how you just lifted the whole slide out. Mine doesn’t do that.
@@garccon9 on mine the takedown lever is removed. That is the only way you’re removing the upper from the lower. You have to get that take down lever out of there.
But you can’t remove the td lever if the slide is closed. (Neutral position) Don’t know how I got the slide back on without the takedown lever being unlocked.
Is that a full size barrel/slide on a smaller frame?
eassimak that is a full size RX slide with a faxon threaded barrel on a xcarry grip module.
@@SigGuy Thats beautiful. I run an x carry and have looked into getting a bigger slide. How does that work with holsers? do you just shop for p320 rx/full size one?
where did you get the grip work done?
That grip was done by 313 tactical.
@@SigGuy I don't see stippling on their website, how do I contact them about it?
@@paladin5133 tell them I sent you…
facebook.com/313tacticalcoatings/
What stock is this?
Seth Land that is a custom grip module from 313 tactical coatings.
Who stippled and cerakoted that p320
That one was from 313 tactical. Tell him I sent you.
Just paid a shop 65 to "fix"
ohthecoolest 😲