Glad I have come across your channel. Thank you for your contribution to the community. Thank you for testing things to their limit. Much appreciated. Love the sense of humor too.
Marko Tatamovich here , I’m polish and I invent my own knife steel , it’s called Kurvacut , I use secret blend of molybdenum and skin of 9 polish sausage. I have Sam Rockwell of 120, I cut steel balls in half in one chop, make your knife look like toy. I’m fully qualified metallurgist and have degree in science,physics,electronics,nuclear engineering,quantum mechanics, medicine,sociology and biology, but here in Uk I work in sausage packing factory, I’m best knife maker in world, like betman.
Thanks Aaron. A few years ago you helped me out with 80CRV2 HT. I just made a blade using MagnaCut. Used the same formula, 2050 and 350X2. We'll see. I have been using Elmax quite a bit. Now to find some MC in .156"
You probably already know but one tip for keeping the wrap from sticking is to dust it with baby powder (needs to be titanium dioxide, not corn starch) before heat treat. I had issues with high temp treatments that would fuse a lot of the foil to the blade and haven't had an issue since. Also, I have the 220V evenheat oven and I doubt it's any faster ramping up. It takes probably 40 minutes to get to 1950° F. I initially used a homemade oven with DIY wound elements that would heat up in just a couple of minutes but the elements only lasted a few firings so I imagine Evenheat tries to balance element life with ramp speed.
Lets be honest here, if you don't plan on cutting thick bolts and screwdrivers in half, you will be well served by Magnacut. Personally I am impressed, especially with the knife thickness and the thin grind used here which were both thin.
Wow now thats a REAL knife test. I will tell everyone i know about this video and ur channel, really appreciate u taking the time energy and money to make this video.
crazy, I grew up in Morris, never heard it pronounced that way. We pronounce it more of ep than ape. Even after all the years I have been gone, when I go back it really hasnt changed much. My brother and other family are still there, I get back almost every year.
I am impressed! I very much appreciate you making this video also. I just got my first MagnaCut blade and my first online knife order, a Hogue Deka. Although much more expensive than the knives I usually buy from Ace Hardware or Walmart, this video helps to justify me buying it. I live in Hawaii, so I look for stainless steel knives, even the Aus 8 and 14c steels from Ace and Walmart sometimes show staining after a weekend of camping so im looking foward to the better corrosion resistance of the MagnaCut. Now I just need to find a good outdoor fixed blade MagnaCut knife for hunting and camping. Appreciate the video, mahalo for making it. Aloha
Thank you I appreciate that. I know bark river bakes, some good magnetcut outdoor blades. Also, big brown bear makes some good skinner blades. Creely knives. Also does a great job with Magnacut. And big Chris makes competition choppers from it. Great choice Aloha.
This is amazing. I learned a lot from this video, and it was damn fun too. I just bought a Hogue Deka for $130, not pretty but I expect it will do what I need. Thanks!
Never a fan of jack of all trades, generally. I really appreciate it for what it is though, like a stainless 4v, except I’d just take the 4v anyway. If I were to make a knife for someone to have forever and not have to worry about I’d choose this but for now it’s high carbide tool steel as hard as I can muster. I really appreciate these videos. People poo poo desctrutive tests but with the right observation they’re useful as hell for me brain to see the physical limits.
Im chronicly ill and have been unable to make knives of my own, still enjoying watching you having fun making sharp Tools for outdoor and kitchen. These videos of youres keep my mind active and sane, because of the chronic severe pains can be shut out when I concentrate on youre videos.
Despite all the modern steel versions, which I also use for custom knives if desired, I still prefer to use D2 and for longer daggers or swords or blades that have to withstand a lot of bending I use C75 steel, which is more in the direction of spring steel. Both types of steel are relatively easy to work with and easy to harden. What are your favorite types of steel?
Well, that’s a pretty big broad question my favorite steels, Far as simplicity and ease of work ease of sharpening ease of finish, I’m gonna have to go with AEBL FAR AS SOMETHING I WANT TO LOOK REALLY GOOD I WOULD GO WITH W-2 with a wicked Hamon line. Far as performance as in Balance something that can just do everything well, I have to go with MAGNACUT. 80crv2 & 8670 they are also very fun to work with also. 14c28n & 26c3 are also right up there.
@@BennyCFD perhaps, that or it becomes an industry standard since it covers a variety of valuable characteristics. I agree though this is the day and age where technology is constantly changing as with the processes while finding the next super steel until we find the one to use on a very special type of aircraft, eventually lol.
@@BennyCFD s30v/s35v was the big designer fad steel for over a decade and it had a great run. That doesn't mean it was worthless for the time. Magnacut will have a long run too until something better comes out. And even then it will still have a place
What exactly was the thickness of the knife(both at the spine & behind the edge)? You said it was ground about as thin as a normal kitchen knife? wow if so that’s pretty impressive! Sorry for asking, Im sure you mentioned exact specs, hrc, & heat treat stuff in the video, but I was skipping all around…
The spine was 1/8 And the edge was about a thick kitchen knife, The knife was really never sharpened like it could be though so the edge will hold up much better if it was properly sharpen I was just doing a Destruction test not an edge Retention test
Man you’re wasting belts, go get a few combat abrasives ceramic belts. I use them myself a lot they last for a very long time you won’t regret it. Try the 36grit specifically, they just don’t stop cutting
Every belt I used in this video was a 36 grit ceramic belt from combat abrasive or tru-grit. If that sucker ain’t throwing sparks im throwing it away lol.
@@AaronJohnson1979 I was referring to your comment about the purpose of MagnaCut. That being said, it was painfully fun to watch. The steel grain was amazing… very impressive!
Exactly MAGNACUT is good at everything, holds a hell of a lot better edge than each H1 & LC200n. It also has better edge stability with a thinner hardness geometry. Which to me is more important than toughness. Even though MAGNACUT is no slouch in the toughness compartment either. It’s just good at everything I found no real weaknesses and I have tried to make it rust with no success
I live in an apartment so I can't make my own knife and I was wondering if you can make a simple, custom knife. I live in Manitoba Canada. Would be awesome.
I will let you know if I start making knives to sell as of right now i am not. And you can make a knife with just a file outside on a stump. Just because you live in an apartment building don’t let that stop you if that’s what you wanna do. Nothing can stop you from accomplishing something that you want.
True indeed. Hopefully this year I will be able to get a house and then I'll can make my own furnace and get some more tools that I need. The whole place might go up in flames if I did that here!
Awesome video! I am close to Morris in Ottawa, IL and just ordered some 1084 to try and get started. Would love some pointers if you have any interest in teaching a new guy.
Absolutely I’m right in Mazon I would be happy to show you what I know 1084 is great steel to start out with its great steel for beginner or a seasoned knife maker
Not sure why but CZcams keeps deleting my comment. Maybe because I tried putting my email address in it, idk. But I really appreciate it! My steel just arrived and it would be awesome to meet up if you’re still willing!
@@ryanpeterson1881 yeah usually Saturday is a good day the next couple Saturdays I won’t be available. I’m going hiking, but after that we can definitely find a day that will work for both of us but Saturdays are what’s best for me
@@AaronJohnson1979 I am asking a blade smith help me make a outdoor magnacut knife similar to this and couldn't decide between 4 or 5 inches. Then I saw your video and was shocked. Never seen anyone do destruction test like you do. Like CZcams knows what I am looking for. I ended up requesting a 5" blade. What compound do you think works best when stropping the magnacut knife?
@@IronCan88 I like to use diamond spray on leather. The one I have is from Northwest knife guy check out his CZcams channel. He sells it and it’s very affordable and long lasting
Good job Aaron. Video quality continues to improve as well as your knife making skills. And who else is out there testing with no glove, no handle, nothing! #IronworkerHands
The 0.93 mm thickness, wasn't behind the edge, but 3/4 before that spot. Except if I'm measuring wrong all these years, thinking that the right spot is exactly where the edge bevel has ended and the main bevel starts. Is that correct, or am I wrong all this time? I 'm not joking, so I'd appreciate a response, from anybody who knows which is the right spot to measure. Thanks for everything we've learned from this video!
You can measure from any spot you want. I like to use the micrometer notches because it’s consistent in the same spot on any knife,, if you go by the bevel that’s going to be in-accurate simply, because no bevel is the same unless you’re using some kind of angle guide system, and if you sharpen on stones by hand, a lot of times, people get rid of the shoulder and the shoulder is what you’re measuring to basically just a convex from the very Apex all the way up,, we’re there would be a primary bevel or secondary bevel . So basically measure wherever you want and use that same method, not relying on the grind or angle of sharpening.
@@AaronJohnson1979 Thank you very much, for explaining!!! I really don't know why I've never thought of all this, when I already knew that it's exactly how you described it. I really appreciate it, thanks a lot man! Stay safe!
Just a tip! Not firing shots cause I really enjoyed this video! When you hold up the knife close to the camera, if you hold your other hand behind it you will have an easier time getting it to focus! Thank you for making this video!
I have a small slip joint knife mfr. says 61 hrc. What would be the advantage of 61 vs 63-64? Also the knife was approximately 23 degrees per side, I’ve taken it down to 18 degrees per side. Do you think that’s a bad thing to do?
Far as the differences between the HRC Laren Thomas as a excellent video on this exact subject it’s called is 64 HRC the sweet spot for magnacut now the 18° angle is nothing magna cut can handle that all day long plenty of edged stability
Have you tried these tests with CPM-3V before? Would like to see how they compare since the 3V is more common and a lot of us have a feel of how it holds up.
I’ve dealt with 3V one time it’s terrible to work with i’ve also owned knives in 3V. MagnaCut is 10 times better on the grinder “machinability”! 3V has high shock Toughness very shock absorbent but far as edge stability Toughness which there is two types of Toughness it’s very low 4V is much better for toughness in the Edge stability department. big brown bear has a great video on that subject. MagnaCut will be 10 times more stain resistant of 3V and it will hold an edge longer than 3V MagnaCut will also have better edge stability at a high hardness and thin geometry. Also MagnaCut has a much higher hard ability capability. Pretty much MagnaCut blows it away!
@@AaronJohnson1979 ao for an hard use fixed blade, that gets used for seperating window frame from concrete and do all kind of bushcraft stuff: 4V is the real deal here? Or should I go for magnacut
I used to live right down the road from Gebhard park. I had no idea anybody near there built nice knives. Good to know. My in-laws live in Dwight/Coal City. I may have to have them pick a knife up for me.
Awesome test thanks for testing it I Got a Hogue Deka with Ultem scales I love the blade the Wharncliffe but I can't get Hogue to tell me what angle I should do the back which is just barely thicker and the front is thinner it looks to me. It's the only Magnacut knife I could find that I liked and could actually afford.
On Amazon there is a probably $15 tool. It’s called a knife angle reader and it uses a little laser and it will tell you exactly what the angle of the bevel
When I make those stainless steel bags to heat treat, I will often make them an extra inch longer, cut off the top and do a second blade. Like you, I also don’t wear gloves.
Awesome vid mate, no rubbish, you know your edge geometry, and you showed me as fellow maker excactly what I wanted to see done to magnacut. Keep it up I learned as much about magnacut from that vid as I did from Larrins book.
But actually it is meant to have one of the best edge retentions and one of the most rust resistant and very tough steel and when you heat treat it correctly than that is the case like the guys from creely blades they did that
The keyword is “one of the best” not THE best a few steels are more rust resistant some have longer edge holding and a lot of steels are tougher, look at it like this. MAGNACUT is like a king of all trades ace of none.
You seen the grain structure, you seen the toughness and it had good edge retention. The heat treat of this is correct it might perform completely different though with different geometry of the blade and a different HRC & edge
Also anytime you torque a edge on a brass rod like I did I don’t care what kind of steel it is or heat treat it’s going to compromise the edge cutting ability
i dig the into. you have the right idea imo. Only suggestion I have is chromium oxide is fucking trash and terrible. Very early on in my knife fiddling journey I switched to diamond powder. It's cheap and extremely effective. Comes in accurate distribution ranges in terms of abrasive. Very cheap. Lasts forever. You can use it with any kind of carrier or substrate as well, including a wax bar if you wanted. Cuts 52100 just as well as it cuts 10v. I love that aspect, especially for smoothing and surface finishing, if you want a smooth almost unnoticeable cladding line, it works amazing. For something like magnacut with those vanadium carbides I'm gonna guess it does better with diamond too. I haven't actually used magnacut yet but I'm interested, also I have worked with steels with similar levels of vanadium carbide, both more of it and less. Thing is I almost exclusively do kitchen knives and already have certain stuff I use and like to use. idk. Anyway I find anything with more than 3% vanadium does better on "superabrasives" aka diamond or cbn vs. traditional/conventional abrasives. I've gotten good results with silicon carbide tho. Sharpening game needs some work, but otherwise looks like youre having too much fun.
Lol I’d say that’s a pretty fair analysis, And yes, I do get a much more refined and Toothy edge from the DMT course on the magnacut. I keep that Norton crystalline oilstone out in the garage just for beating on it and rough use workhorse stone. I keep my other stones in the house lol. But yeah, this MAGNACUT having 4% vanadium seems like it should be harder to sharpen then what it is, I don’t know why but it seems to sharpen fairly easy. I can get an edge on even an Indian stone with magnacut.. only thing I found hard to do is polish the edge on MAGNACUT, That’s not easy to do. I’d say the steel is easy to sharpen but hard to polish and I agree those diamond stones and water diamond stones, which I’ve never use the water diamond stone. I would love to but man are they expensive lol They do work better than aluminum oxide or Crystalline stones on stuff with 4% vanadium and up
For me it gives me a false reading on HRC AFTER heat treating, Also behind the mill scale is minor pitting that is deeper in the steel it’s a lot easier to grind when it’s soft before heat treating.
Any steel get one of them water sprayers they’re cheap. Keep it cool. But if you’re worried about it that much, you can always look at data sheets on any Steel and see which one tempers at a high temper.
No, no , no !!!! The last part was unnecessary my friend, your point was proven!!!! Lol !! If I were there , I would never have let you do the final part. Hehehe 👍 God bless you and keep you all !!
Congress passed a bill for America and was about the 3rd country to go Metric, in the 1800. Craftsman liked the halving and doubling of the Imperial system better. Now that things are going more digital, people don’t have to do the more complicated (longer) fractional math; required using metric.
Well, hell I don’t know nothing about any of that but I believe you, I just think the metric system is better, but I’m I would probably still suck at math lol
26:34 I'm a little confused. And its not really even critical, but it caught my attention. I think your calipers are a little off. That is VERY CLEARY more than half a millimeter, or even 0.86 mm. Half a mm is about 4 human hairs. And there's a pretty visible gap between the caliper jaws. And even though the lcd screen says 0.86 mm, the physical markings on the ruler portion show that its closer to 2.5mm (as seen by pausing at 27:22 ). Just something i noticed. Either way, good video.
Well, it wasn’t 2.5 mm I’m sure of that but then again This is a very cheap caliber very loose got it from Harbor freight. I’m sure it wasn’t accurate I need to invest in a good one. I do see what you’re saying in the video. Something definitely was off there if I was misleading I apologize. Blade was significantly thinner than it was the first go around but I really never even got it very sharp and I don’t like the geometry that it had on it. Either way it was just a torture test. I didn’t put much emphasis on a quality edge or even geometry just quickly threw it together and smashed it to bits. I think it held up really good.
Awesome video i really think the hardness mine is at is the optimal sweet spot actually. And it could be fairly thin as you see and take some punishment too. The edge angle determines pretty much the apex thickness and strength so it can be fairly thin behind the edge as you see and be durable at the very very edge. So as i always say go thin you can always back it up just a smidge as i do. Geometry cuts simple as that. You saw i push cut cardboard with mine and nasty nasty glued foam with plastic inserts and it still push cut free standing paper. Thin is always king to some what of a degree. Thicker edge and higher angle means one must use much more force on the edge. Thin low edge angle say 10 or 13 to a burr then just use a microbevel at say 18 or 20 and it still very strong. Magnacut likes a refined polished little over stropped edge strop it at 25 ish And you are running out of bolts my man 🤣🤣🤣😅😅😅
For a camp knife I’m gonna have to say this is probably the optimal heat treat in my opinion simply because it was probably 61 HRC and it broke fairly easy it didn’t take a Bend at all before it broke everything is exactly Straight still in pieces. At 63 or 64 it would break much much easier and this was easy enough to break for a chopper or hard used outdoor blade I’m gonna stick with this heat treat
He probably had it at a lower edge angle. I grinned the knife very thin but when I sharpened it, I put about a 17° angle on the edge kind of like a micro bevel really adds a lot of toughness. You still get some of the benefits of it being thin and a little toughness at the same time. A lot of steels would still fail though magnetcut is pretty exceptional stuff.
@@AaronJohnson1979 he says that all knife on the test where at 17 degrees so it should be similar results. Anyway thanks for those test it shows that it’s really good steel in its niche . Keep those test going
@@danygodbout979 i usually sharpen naturally around 17 to 22° so I could’ve been a little more than 17. That’s pretty much when you’ll start seeing it fail on the nail test right around there. I have a laser angle reader now, so I can get an exact angle degree but I didn’t have it then in this video
I've seen Magnacut blade edges survive being beaten into a few nails cutting all the way through each time at hrc 62.5. I've also seen plenty of long camp choppers at hrc 63 in cpm 4v which has equal toughness at the same hrc to magnacut and they never break these blade or chip them on wood. my guess is you could have performed this test at at least 62.5 hrc and it still would have done just as well but remained sharper for longer on paper tests. Good video though. edit: I take back what I said in the top of this comment, I had no idea you were going to drive it through a DRILLBIT and SCREWDRIVER at the end!!!!! yea 61 was plenty hard for this application, infact maybe you need to try something a bit tougher if you want it to survive, 3v perhaps.
Yeah, I just wanted to give the steel. It’s best chance at the “destruction test” I really didn’t even sharpen it. That good wasn’t going for Ed retention just wanted to show that there was a edge. And it wasn’t chipping or rolling when I do a destruction test I don’t stop until that knife is in pieces. Lol
Thank you but i push any new steel i use to limit. I don’t see any other videos of anyone breaking MAGNACUT intentionally. But I figured some people would be interested in knowing its limit
@@joelhunter984 Yep I have no time to make them right now either I have nothing for sale I work construction as an ironworker summertime’s are pretty busy for me I usually make most of my nights in the winter
Magnacut is one of them steals that can do everything and everything exceptional. It is plenty tough enough to make a Bowie knife or even something bigger. It would make a great chopper or even a kitchen knife to a pocket knife to a fillet knife. It’s the best there is.
AEBL is cheaper then nitro V and AEBL is tougher by quite a bit pretty much the same edge holding nitro V has a little advantage on stain resistant, but I’ve never had a problem with AEBL
I usually dont watch entire vids, this I watched, just got my hands on a Bark River Bravo 1 Lt Magnacut so I definitely liked what I saw here, My 3v is sweet but need to keep it dry, clean it well all the time,,, hell just using it to carve up steak stains it, needs to be polished out often,,,, Magnacut should allow a quick wipe on my pants and into the sheath with no issues.... I"ll have it out in the Everglades in a couple of weeks to beat the crap out of it, Very cool Vid,,,👍
I have tried to make magnacut rust and it’s almost impossible without some kind of wild chemical the toughness is great and edge retention is great it’s definitely the king of all steel in my opinion
Thank you I appreciate that and I do believe misinformation is one of the biggest problems with knife making. I love the trade and I hope it continues to grow and more people get into it
Let me tell it like that I usually misshandel my blades gettingen a nail out of the board ect. So blades that snap like that Chip ass well. So i like it softer
@@dimmacommunication I forgot where I read about this, You can use acetone and dry ice it gets a little colder but kerosene is so much safer to work with
@@AaronJohnson1979 I wonder if it'd need a differential quench. I have a 80crv2 with a differential and I'm not sure it even needed it or benefits from it as an example. I have no idea with these new super steels. For example I've not heard of anyone or thing about trying it with Cpm 3v or any super steel for that matter, just as an example.
@@sirsir9665 Well with a long soak time And really high temperatures with these super steels you have to have them in stainless steel wrap so it would be kind a hard to differentially heat treat it in oil not saying it’s impossible but I honestly don’t know you probably would be better off heat treating it normal then bluing the spine with a torch
@@sirsir9665 keep in mind 80crv2 is some really really tough stuff it’s much tougher than magnacut you would be able to pass a ABS journeyman test with 80crv2 I highly doubt any stainless steel could pass that test even magnacut but I could be wrong
@@AaronJohnson1979 Hahaahaaa, Seriously though, Jean Claude Van Dam could probably slice his way through Steven Seagal, Ralph Machio, Dolph Lundgren & Patrick Swayze with one of those mastefully engineered pig stickers You Smithed up in your insanely equipped garage. I gotta go back to sleep but i'll be watchin' more of your $#*@ tomorrow....Later 🔪
Lol u are 100% correct I can’t argue with that. Yes this knife really never reached anything I would consider sharp. If you watch any of my other videos, I do know how to sharpen and I consider myself as being pretty decent at it. I didn’t think a higher sharpness level would affect the toughness, considering this is a “”Destruction test not a sharpness test”” I do many sharpness testing on other videos, this one was just good old fashion blunt force, trauma testing, and it did awesome at that.
@@lyronixone4567 no I’ve got that comment a lot it’s definitely a legitimate comment to make for sure, about the sharpness. I wasn’t looking for edge retention. I was looking for edge damage when I was cutting through the paper which in a way is different than something going dull from cutting through rope or something abrasive. I was looking for hang ups like micro chipping or some type of physical damage to the knife. It’s a different form of edge retention. But yeah, I should’ve been more clear. I made this video a long time ago, and I was still pretty new at taking videos and explaining things.
Not only did you break the blade but it broke my heart to watch it too lol a disabled veteran like me very likely will never be able to afford such a badass knife so this really hurts to watch but like ya said "all in the name of science" 🤷♂️👍💪🔪
Thank you for your service ❤️ Now im speaking for knife makers, every new steel has to be tested and pushed to see what it can do. You can read and do research watching videos. But until its in your forge or oven in your own shop only after testing will you be comfortable using / making or selling a knife made with your own hands. Even expensive steel like magnacut, doing this test was expensive eat up belts and it was probably a $50 piece of steel alone. But I learned a lot and I know how far I can push the blade steel far as geometry goes. Not all steel’s can handle that kind of abuse that thin. Like 1095 could never be that thin and that hard and survive some of those tests! I had a hell of a time getting magnacut to even chip out it was hard to destroy the blade edge I almost ran out of things to hit it against.
@@AaronJohnson1979 indeed indeed I saw that, I am quite impressed with this new steel and based on the knowledge of the kid who developed it it damn well should be incredible! How would you say that it compares to cruwear or 4V- M4 even? I've been enjoying some LC200N lately the stuff is pretty impressive for the recipe 👍🔪 keep on building amazing blades sir and maybe one day I'll be able to buy one!
@@kevinAuman1 Absolutely and far as how it compares to 4v or m4, i’m really not sure I’ve never made a knife from either one of those steel’s. I just got a oven not too long ago so I’m playing around with all of these CPM steels I am by no means any kind of an experienced expert on it. At least not yet lol. There is a really good book By Larrin Thomas “knife Engineering” it’s got all of those comparisons strengths and weaknesses. Lotta charts and graphs I like that kind of stuff. I’ve made a lot of knives from simple steel but This cpm. steels I still have a lot to learn, So I won’t be selling any of those types of blades anytime soon but one day I will when I got it down
@@kevinAuman1 I have no knives available for purchase right now but if I do decide to start selling them I will tell you first. As of right now I’m just having fun making them and making videos
@@AaronJohnson1979 - You called this steel correctly with “balanced” as it is both tough & hard with compromised edge retention, your testing bore these trait’s out. However the dynamics between steel type, hardness & blade geometry are complex and unfortunately your testing methodology may require slight refining.. but again it was entertaining! Every bushcraft blade has to cut mild steel nails, how else would we know?
It’s just a distraction test doesn’t have to have a good finish doesn’t have to have a sharp edge. At the beginning of the video it had a very thick angle, at the end of the video it was a much thinner angle. I showed what kind of abuse it’s capable of taking
@@user-ww4od4jl1f Oh definitely I agree with that! Every time I start a new steel I do pretty much the same type of distraction test right off the bat, I try to use the same thickness around the same geometry just a rough test edge and I put it through a similar ringer anytime I try a new steel. Gives me a rough idea of where they stand amongst each other not scientific but in my garage that’s about as scientific as I can get lol. It really is a phenomenal Steel but in this video I was still getting used to working with it I really just started working with CPM Steel’s not too long ago so there’s definitely learning curves involved for me
@@AaronJohnson1979 Does anyone already make knives from this steel? I have several BRK knives with a CPM 3V steel blade and a Fällkniven with 3G blade. There is definitely no perfect steel; each has a weak point. It cannot be rationally explained, but I like knives. Classic, not Star Wars design ;-)
What a waste of time and great steel! Your tests have nothing to do with how a knife steel will hold up under real life usage! I can throw a rock through your windshield, but that doesn't mean it's not strong! 🤔😵😡
But all kidding aside, the name of the video is not real world usage. The name of the video is magnacut destruction test and in order to break this steel and destroy it. This is the kind of stuff I had to do you didn’t have to click on it and it wasn’t click bait I destroyed it, I did what I said I was gonna do,, it’s not a edge retention test it’s not a sharpness test hell it’s not even a knife test,, it’s a MAGNACUT destruction test and that’s what it was.
Glad I have come across your channel. Thank you for your contribution to the community. Thank you for testing things to their limit. Much appreciated. Love the sense of humor too.
Thank you I appreciate it!
Marko Tatamovich here , I’m polish and I invent my own knife steel , it’s called Kurvacut , I use secret blend of molybdenum and skin of 9 polish sausage. I have Sam Rockwell of 120, I cut steel balls in half in one chop, make your knife look like toy. I’m fully qualified metallurgist and have degree in science,physics,electronics,nuclear engineering,quantum mechanics, medicine,sociology and biology, but here in Uk I work in sausage packing factory, I’m best knife maker in world, like betman.
Lol
Thank you for posting the testing. Destruction videos tell us much more than talking about design and specs.
I agree until I push it till it’s breaking point Im never comfortable with it
Thanks Aaron. A few years ago you helped me out with 80CRV2 HT. I just made a blade using MagnaCut. Used the same formula, 2050 and 350X2. We'll see. I have been using Elmax quite a bit. Now to find some MC in .156"
Magnacut is something special! I love it!
You are really funny at the same time your being serious!! I absolutely love the video!!! Thanks for making my night!! 😂
The trick is, I just be myself some people think I’m weird some people think I’m funny some people hate my guts 😂 thank you for the kind words
You probably already know but one tip for keeping the wrap from sticking is to dust it with baby powder (needs to be titanium dioxide, not corn starch) before heat treat. I had issues with high temp treatments that would fuse a lot of the foil to the blade and haven't had an issue since.
Also, I have the 220V evenheat oven and I doubt it's any faster ramping up. It takes probably 40 minutes to get to 1950° F. I initially used a homemade oven with DIY wound elements that would heat up in just a couple of minutes but the elements only lasted a few firings so I imagine Evenheat tries to balance element life with ramp speed.
Thank you for all that and no I didn’t know that trick with the baby powder and makes sense about the element. Thank you I appreciate it.
Lets be honest here, if you don't plan on cutting thick bolts and screwdrivers in half, you will be well served by Magnacut. Personally I am impressed, especially with the knife thickness and the thin grind used here which were both thin.
Thank you
If you want to cut bolt and screwdriver grab a Busse with INFI steel.
@@Random-ed2xf Not sure I would feel great about using a 500 dollar knife to cut bolts with, maybe a bolt cutter would be better? Far cheaper too!
Wow now thats a REAL knife test. I will tell everyone i know about this video and ur channel, really appreciate u taking the time energy and money to make this video.
I just do it for fun I don’t sell knives. I don’t make money on videos. I just enjoy myself and try to learn from others and share what I know.
Haha, even with a test blade, it made my butt pucker a bit to watch that abuse. Seems like great steel. Thanks a lot!
Lol yeah that’s about $50 of steel right there destroyed lol
crazy, I grew up in Morris, never heard it pronounced that way. We pronounce it more of ep than ape. Even after all the years I have been gone, when I go back it really hasnt changed much. My brother and other family are still there, I get back almost every year.
I am impressed! I very much appreciate you making this video also. I just got my first MagnaCut blade and my first online knife order, a Hogue Deka. Although much more expensive than the knives I usually buy from Ace Hardware or Walmart, this video helps to justify me buying it. I live in Hawaii, so I look for stainless steel knives, even the Aus 8 and 14c steels from Ace and Walmart sometimes show staining after a weekend of camping so im looking foward to the better corrosion resistance of the MagnaCut. Now I just need to find a good outdoor fixed blade MagnaCut knife for hunting and camping. Appreciate the video, mahalo for making it. Aloha
Thank you I appreciate that. I know bark river bakes, some good magnetcut outdoor blades. Also, big brown bear makes some good skinner blades. Creely knives. Also does a great job with Magnacut. And big Chris makes competition choppers from it. Great choice Aloha.
@@AaronJohnson1979 Awesome! Mahalo for the information I'll look into it! Wish you much health and success in the future. Aloha
This is amazing. I learned a lot from this video, and it was damn fun too. I just bought a Hogue Deka for $130, not pretty but I expect it will do what I need. Thanks!
Thank you, i appreciate it i had fun destroying it lol
The more you use it, the more useful it becomes to you, the prettier it’ll be! Used to think spyderco was ugly now they’re the standard of beauty 😂
Amazing footage real informative 👍
Thank you I did my best love the steel
Thanks! Good job, pretty darn tough stuff!
Yep it’s good at pretty much everything great steel
Very tough
Never a fan of jack of all trades, generally. I really appreciate it for what it is though, like a stainless 4v, except I’d just take the 4v anyway.
If I were to make a knife for someone to have forever and not have to worry about I’d choose this but for now it’s high carbide tool steel as hard as I can muster.
I really appreciate these videos. People poo poo desctrutive tests but with the right observation they’re useful as hell for me brain to see the physical limits.
Thank u and these tests are fun too lol
Very impressive. 👏
Im chronicly ill and have been unable to make knives of my own, still enjoying watching you having fun making sharp Tools for outdoor and kitchen. These videos of youres keep my mind active and sane, because of the chronic severe pains can be shut out when I concentrate on youre videos.
Despite all the modern steel versions, which I also use for custom knives if desired, I still prefer to use D2 and for longer daggers or swords or blades that have to withstand a lot of bending I use C75 steel, which is more in the direction of spring steel. Both types of steel are relatively easy to work with and easy to harden. What are your favorite types of steel?
Well, that’s a pretty big broad question my favorite steels,
Far as simplicity and ease of work ease of sharpening ease of finish, I’m gonna have to go with AEBL
FAR AS SOMETHING I WANT TO LOOK REALLY GOOD I WOULD GO WITH W-2 with a wicked Hamon line.
Far as performance as in Balance something that can just do everything well, I have to go with MAGNACUT.
80crv2 & 8670 they are also very fun to work with also.
14c28n & 26c3 are also right up there.
Very interesting, thanks mate and good luck with all your projects. @@AaronJohnson1979
@AaronJohnson1979 Have you used rwl34 steel? If you have what do you think of it
That's a real great test. Thanks
Pretty damn resilient stainless steel... cannot wait to get my hands on a knife in this steel. Certainly earned it's "super steel" badge
And when the next designer fad steel comes out you'll put this knife/steel on a shelf nd forget about it.
@@BennyCFD perhaps, that or it becomes an industry standard since it covers a variety of valuable characteristics. I agree though this is the day and age where technology is constantly changing as with the processes while finding the next super steel until we find the one to use on a very special type of aircraft, eventually lol.
@@BennyCFD s30v/s35v was the big designer fad steel for over a decade and it had a great run. That doesn't mean it was worthless for the time. Magnacut will have a long run too until something better comes out. And even then it will still have a place
@@whyillustrated5610 stropping magnacut is very easy, have to agree with the video
Thanks for doing this.
I’d suggest figuring out a different method (or armoring up substantially) for bending/breaking knives. Flying sharp steel…
Yeah I didn’t realize that until I watch the video and seen it almost hit me in the face
@@AaronJohnson1979 Almost doesnt count,,,, great vid,,,👍
What exactly was the thickness of the knife(both at the spine & behind the edge)? You said it was ground about as thin as a normal kitchen knife? wow if so that’s pretty impressive! Sorry for asking, Im sure you mentioned exact specs, hrc, & heat treat stuff in the video, but I was skipping all around…
The spine was 1/8 And the edge was about a thick kitchen knife, The knife was really never sharpened like it could be though so the edge will hold up much better if it was properly sharpen I was just doing a Destruction test not an edge Retention test
Great magnacut steel test!
Thank you appreciate it
Man you’re wasting belts, go get a few combat abrasives ceramic belts. I use them myself a lot they last for a very long time you won’t regret it. Try the 36grit specifically, they just don’t stop cutting
Every belt I used in this video was a 36 grit ceramic belt from combat abrasive or
tru-grit. If that sucker ain’t throwing sparks im throwing it away lol.
AWESOME video! Much appreciated!
Thank you 😊
Reasonable thinking… How refreshing!
Maybe not reasonable thinking but it was fun lol
@@AaronJohnson1979 I was referring to your comment about the purpose of MagnaCut. That being said, it was painfully fun to watch. The steel grain was amazing… very impressive!
@@bobhabsolute4995 Oh absolutely it’s the finest grain I’ve ever seen in a steel
I think in 4.3mm to 4.5 mm thickness and 60 to 62 rc is probably the perfect range for this steel.
It's stainless enough that Spyderco is using it in it's "Salt" series, along with LC200N and H1.
Exactly MAGNACUT is good at everything, holds a hell of a lot better edge than each H1 & LC200n. It also has better edge stability with a thinner hardness geometry. Which to me is more important than toughness. Even though MAGNACUT is no slouch in the toughness compartment either. It’s just good at everything I found no real weaknesses and I have tried to make it rust with no success
I live in an apartment so I can't make my own knife and I was wondering if you can make a simple, custom knife. I live in Manitoba Canada. Would be awesome.
I will let you know if I start making knives to sell as of right now i am not. And you can make a knife with just a file outside on a stump. Just because you live in an apartment building don’t let that stop you if that’s what you wanna do. Nothing can stop you from accomplishing something that you want.
True indeed. Hopefully this year I will be able to get a house and then I'll can make my own furnace and get some more tools that I need. The whole place might go up in flames if I did that here!
Awesome video!
I am close to Morris in Ottawa, IL and just ordered some 1084 to try and get started. Would love some pointers if you have any interest in teaching a new guy.
Absolutely I’m right in Mazon I would be happy to show you what I know 1084 is great steel to start out with its great steel for beginner or a seasoned knife maker
Not sure why but CZcams keeps deleting my comment. Maybe because I tried putting my email address in it, idk. But I really appreciate it! My steel just arrived and it would be awesome to meet up if you’re still willing!
@@ryanpeterson1881 absolutely man I don’t know why CZcams deleted your comments I know I didn’t want to figure out a time and a date
Is there a day/ time that works well for you? I’m generally pretty available.
@@ryanpeterson1881 yeah usually Saturday is a good day the next couple Saturdays I won’t be available. I’m going hiking, but after that we can definitely find a day that will work for both of us but Saturdays are what’s best for me
How long and tall is this blade? It looks like a very useful size. Thank you
@@IronCan88 it’s basically a copy of the LT Wright Genesis dimension wise 5 inch handle 4 inch blade by inch and 1/2 x eighth of an inch thick
@@AaronJohnson1979 I am asking a blade smith help me make a outdoor magnacut knife similar to this and couldn't decide between 4 or 5 inches. Then I saw your video and was shocked. Never seen anyone do destruction test like you do. Like CZcams knows what I am looking for. I ended up requesting a 5" blade.
What compound do you think works best when stropping the magnacut knife?
@@IronCan88 I like to use diamond spray on leather. The one I have is from Northwest knife guy check out his CZcams channel. He sells it and it’s very affordable and long lasting
Good job Aaron. Video quality continues to improve as well as your knife making skills. And who else is out there testing with no glove, no handle, nothing! #IronworkerHands
Well if there’s another Ironworker out there making a Knives I’m sure they’re not being very safe either lol
The 0.93 mm thickness, wasn't behind the edge, but 3/4 before that spot. Except if I'm measuring wrong all these years, thinking that the right spot is exactly where the edge bevel has ended and the main bevel starts. Is that correct, or am I wrong all this time? I 'm not joking, so I'd appreciate a response, from anybody who knows which is the right spot to measure. Thanks for everything we've learned from this video!
You can measure from any spot you want. I like to use the micrometer notches because it’s consistent in the same spot on any knife,, if you go by the bevel that’s going to be in-accurate simply, because no bevel is the same unless you’re using some kind of angle guide system, and if you sharpen on stones by hand, a lot of times, people get rid of the shoulder and the shoulder is what you’re measuring to basically just a convex from the very Apex all the way up,, we’re there would be a primary bevel or secondary bevel . So basically measure wherever you want and use that same method, not relying on the grind or angle of sharpening.
@@AaronJohnson1979 Thank you very much, for explaining!!! I really don't know why I've never thought of all this, when I already knew that it's exactly how you described it. I really appreciate it, thanks a lot man! Stay safe!
@@greekveteran2715 stay safe, you have a great weekend
I bet it is a great steel. I don't need a Super (hard to sharpen) Steel. Isn't field friendly. 1095 does all I need and I do a lot.
Your 💯 correct there there’s no river rock in the world that can sharpen MAGNACUT
WELL DONE!… Very good lateral toughness (almost on par with 3V’s lateral toughness)
Yeah I really like this steel seems to be good for all applications
Aaron, I’m very interested in magnacut. Where did you purchase that magnacut ?
Pops knife supply
Or
Alpha knife supply
@@AaronJohnson1979 Thank you sir!
Just a tip! Not firing shots cause I really enjoyed this video! When you hold up the knife close to the camera, if you hold your other hand behind it you will have an easier time getting it to focus! Thank you for making this video!
Thank you for the tip. I will absolutely try this i appreciate it!
Just picked up 3' x 1/8" from pops. Can't wait to make some $$$$
Have fun four hours of hand sanding
@@AaronJohnson1979 Cerakote, lol.
I have a small slip joint knife mfr. says 61 hrc. What would be the advantage of 61 vs 63-64? Also the knife was approximately 23 degrees per side, I’ve taken it down to 18 degrees per side. Do you think that’s a bad thing to do?
Far as the differences between the HRC Laren Thomas as a excellent video on this exact subject it’s called is 64 HRC the sweet spot for magnacut now the 18° angle is nothing magna cut can handle that all day long plenty of edged stability
Have you tried these tests with CPM-3V before? Would like to see how they compare since the 3V is more common and a lot of us have a feel of how it holds up.
I’ve dealt with 3V one time it’s terrible to work with i’ve also owned knives in 3V. MagnaCut is 10 times better on the grinder “machinability”! 3V has high shock Toughness very shock absorbent but far as edge stability Toughness which there is two types of Toughness it’s very low 4V is much better for toughness in the Edge stability department. big brown bear has a great video on that subject. MagnaCut will be 10 times more stain resistant of 3V and it will hold an edge longer than 3V MagnaCut will also have better edge stability at a high hardness and thin geometry. Also MagnaCut has a much higher hard ability capability. Pretty much MagnaCut blows it away!
@@AaronJohnson1979 ao for an hard use fixed blade, that gets used for seperating window frame from concrete and do all kind of bushcraft stuff: 4V is the real deal here? Or should I go for magnacut
@@nOObels1 dam thats a tough test for any blade lol. Might need to look at 8670 steel for something like that
@@AaronJohnson1979 so not 4V or Magnacut? I know an prybar would be better after all but most times all I carry is an knife.
@@nOObels1 4v and MAGNACUT are very close on toughness and Edge holding
I used to live right down the road from Gebhard park. I had no idea anybody near there built nice knives. Good to know. My in-laws live in Dwight/Coal City. I may have to have them pick a knife up for me.
Come on over will make a knife
Awesome test thanks for testing it I Got a Hogue Deka with Ultem scales I love the blade the Wharncliffe but I can't get Hogue to tell me what angle I should do the back which is just barely thicker and the front is thinner it looks to me. It's the only Magnacut knife I could find that I liked and could actually afford.
On Amazon there is a probably $15 tool. It’s called a knife angle reader and it uses a little laser and it will tell you exactly what the angle of the bevel
@@AaronJohnson1979 Thank You So Much For Helping me GOD Bless You.
@@sterlingstoots3215 God bless
Goniometer
When I make those stainless steel bags to heat treat, I will often make them an extra inch longer, cut off the top and do a second blade. Like you, I also don’t wear gloves.
Love your channel, I’ve learned alot from you! Thank you
Awesome vid mate, no rubbish, you know your edge geometry, and you showed me as fellow maker excactly what I wanted to see done to magnacut.
Keep it up I learned as much about magnacut from that vid as I did from Larrins book.
But actually it is meant to have one of the best edge retentions and one of the most rust resistant and very tough steel and when you heat treat it correctly than that is the case like the guys from creely blades they did that
The keyword is “one of the best” not THE best a few steels are more rust resistant some have longer edge holding and a lot of steels are tougher, look at it like this.
MAGNACUT is like a king of all trades ace of none.
You seen the grain structure, you seen the toughness and it had good edge retention. The heat treat of this is correct it might perform completely different though with different geometry of the blade and a different HRC & edge
Also anytime you torque a edge on a brass rod like I did I don’t care what kind of steel it is or heat treat it’s going to compromise the edge cutting ability
i dig the into. you have the right idea imo.
Only suggestion I have is chromium oxide is fucking trash and terrible. Very early on in my knife fiddling journey I switched to diamond powder. It's cheap and extremely effective. Comes in accurate distribution ranges in terms of abrasive. Very cheap. Lasts forever. You can use it with any kind of carrier or substrate as well, including a wax bar if you wanted. Cuts 52100 just as well as it cuts 10v. I love that aspect, especially for smoothing and surface finishing, if you want a smooth almost unnoticeable cladding line, it works amazing. For something like magnacut with those vanadium carbides I'm gonna guess it does better with diamond too. I haven't actually used magnacut yet but I'm interested, also I have worked with steels with similar levels of vanadium carbide, both more of it and less. Thing is I almost exclusively do kitchen knives and already have certain stuff I use and like to use. idk. Anyway I find anything with more than 3% vanadium does better on "superabrasives" aka diamond or cbn vs. traditional/conventional abrasives. I've gotten good results with silicon carbide tho. Sharpening game needs some work, but otherwise looks like youre having too much fun.
Lol I’d say that’s a pretty fair analysis,
And yes, I do get a much more refined and Toothy edge from the DMT course on the magnacut. I keep that Norton crystalline oilstone out in the garage just for beating on it and rough use workhorse stone. I keep my other stones in the house lol. But yeah, this MAGNACUT having 4% vanadium seems like it should be harder to sharpen then what it is, I don’t know why but it seems to sharpen fairly easy. I can get an edge on even an Indian stone with magnacut.. only thing I found hard to do is polish the edge on MAGNACUT, That’s not easy to do.
I’d say the steel is easy to sharpen but hard to polish and I agree those diamond stones and water diamond stones, which I’ve never use the water diamond stone. I would love to but man are they expensive lol
They do work better than aluminum oxide or Crystalline stones on stuff with 4% vanadium and up
Why does the mill scale have to be removed? Will it effect HT, or just looks bad?
For me it gives me a false reading on HRC AFTER heat treating, Also behind the mill scale is minor pitting that is deeper in the steel it’s a lot easier to grind when it’s soft before heat treating.
Do you take custom orders for knives?
No i don’t sorry, i just do this for fun as a hobby
That is some tough SS. :-) Peace, Stiletto :-)
Tough and super tough edge stability
What would be an ideal steel for resisting the heat from the grinding process?
Any steel get one of them water sprayers they’re cheap. Keep it cool.
But if you’re worried about it that much, you can always look at data sheets on any Steel and see which one tempers at a high temper.
Awesome work-thank you sir
No, no , no !!!!
The last part was unnecessary my friend, your point was proven!!!! Lol !!
If I were there , I would never have let you do the final part. Hehehe 👍
God bless you and keep you all !!
Lol i’ve had a few people tell me that now lol
@@AaronJohnson1979
👍👍👍Lol
cutting through a drill bit is insane unless its a cheap chinese one
Yeah, it did cut through the drill bit but it did ship a little bit too, so I just think the magnacut won that time lol
Unbelievable! I don't think I've ever seen any knife steel perform to that level. Is magnacut simply the best, or have I missed something?
In my opinion, yes magnacut is the best, it is the most balanced Steel you’re going to get it’s just good at everything
Which steel do you like for the knife?
I like magnacut the most
Congress passed a bill for America and was about the 3rd country to go Metric, in the 1800.
Craftsman liked the halving and doubling of the Imperial system better.
Now that things are going more digital, people don’t have to do the more complicated (longer) fractional math; required using metric.
Well, hell I don’t know nothing about any of that but I believe you, I just think the metric system is better, but I’m I would probably still suck at math lol
@@AaronJohnson1979
😂😂😂
@@ronweber4508 😂
Larrin Thomas the creator says 63-64 is the sweet spot
I just followed the data sheet for magnacut
2050°
@AaronJohnson1979 as good bladesmith would, unfortunately like most steels after some tinkering, there were revisions.
Hey, do you take any custom orders? :)
No sir I sure don’t sorry
Very cool video
Thank you I appreciate it
I need this man to make me a knife! Holy smokes he can build a blade, damn!
Thanks i appreciate it
26:34 I'm a little confused. And its not really even critical, but it caught my attention. I think your calipers are a little off. That is VERY CLEARY more than half a millimeter, or even 0.86 mm. Half a mm is about 4 human hairs. And there's a pretty visible gap between the caliper jaws. And even though the lcd screen says 0.86 mm, the physical markings on the ruler portion show that its closer to 2.5mm (as seen by pausing at 27:22 ). Just something i noticed. Either way, good video.
Well, it wasn’t 2.5 mm I’m sure of that but then again This is a very cheap caliber very loose got it from Harbor freight. I’m sure it wasn’t accurate I need to invest in a good one. I do see what you’re saying in the video. Something definitely was off there if I was misleading I apologize. Blade was significantly thinner than it was the first go around but I really never even got it very sharp and I don’t like the geometry that it had on it. Either way it was just a torture test. I didn’t put much emphasis on a quality edge or even geometry just quickly threw it together and smashed it to bits. I think it held up really good.
Mannn I really really want to buy a knife in this steel to test myself and see how it sharpens all that jazz
It’s starting to get more available
@@AaronJohnson1979 do you have a site where I can shop your knives?
keeping your camera lense clean contributes alot to focusing
Thank you I definitely need a lot of work on the camera aspect of it all so a lot to learn and equipment. If I’m going to do it right
Awesome video i really think the hardness mine is at is the optimal sweet spot actually. And it could be fairly thin as you see and take some punishment too. The edge angle determines pretty much the apex thickness and strength so it can be fairly thin behind the edge as you see and be durable at the very very edge. So as i always say go thin you can always back it up just a smidge as i do. Geometry cuts simple as that. You saw i push cut cardboard with mine and nasty nasty glued foam with plastic inserts and it still push cut free standing paper. Thin is always king to some what of a degree.
Thicker edge and higher angle means one must use much more force on the edge. Thin low edge angle say 10 or 13 to a burr then just use a microbevel at say 18 or 20 and it still very strong. Magnacut likes a refined polished little over stropped edge strop it at 25 ish
And you are running out of bolts my man 🤣🤣🤣😅😅😅
For a camp knife I’m gonna have to say this is probably the optimal heat treat in my opinion simply because it was probably 61 HRC and it broke fairly easy it didn’t take a Bend at all before it broke everything is exactly Straight still in pieces. At 63 or 64 it would break much much easier and this was easy enough to break for a chopper or hard used outdoor blade I’m gonna stick with this heat treat
@@AaronJohnson1979 yes sir
I think you are the same guy uploading all those UFO videos with the grainy out of focus footage.
Lol who sent you?
The screwdriver 🤣🤣
Yeah, maybe I’ll give you that screwdriver
imagine how deadly a magnacut katana would be
(btw how wide that knive was? in mm pls)
38.1 mm tall
127 mm long far as the blade
And yeah a katana made from magnacut would be freaking crazy. Wonder if there’s anyone out there that has tried it
@@AaronJohnson1979 Like slicing through an iron
Magnacut katana slices through iron
@@Kepal now that would be a cool video have a katana made from magnacut slice through a Damascus made katana 😂
iam curious to why the guy from caroters knife chiped his magnacut on nails and not you? its not like he doesnt know heat treat
He probably had it at a lower edge angle. I grinned the knife very thin but when I sharpened it, I put about a 17° angle on the edge kind of like a micro bevel really adds a lot of toughness. You still get some of the benefits of it being thin and a little toughness at the same time. A lot of steels would still fail though magnetcut is pretty exceptional stuff.
@@AaronJohnson1979 he says that all knife on the test where at 17 degrees so it should be similar results. Anyway thanks for those test it shows that it’s really good steel in its niche . Keep those test going
@@danygodbout979 i usually sharpen naturally around 17 to 22° so I could’ve been a little more than 17. That’s pretty much when you’ll start seeing it fail on the nail test right around there.
I have a laser angle reader now, so I can get an exact angle degree but I didn’t have it then in this video
Id bet at a bit higher hrc it would do better all the test you did, except the last where it broke in half.
Higher HRC and even Thinner would do better on all of the tests probably. It took quite a bit to even get this knife to chip
I've seen Magnacut blade edges survive being beaten into a few nails cutting all the way through each time at hrc 62.5. I've also seen plenty of long camp choppers at hrc 63 in cpm 4v which has equal toughness at the same hrc to magnacut and they never break these blade or chip them on wood.
my guess is you could have performed this test at at least 62.5 hrc and it still would have done just as well but remained sharper for longer on paper tests.
Good video though.
edit: I take back what I said in the top of this comment, I had no idea you were going to drive it through a DRILLBIT and SCREWDRIVER at the end!!!!! yea 61 was plenty hard for this application, infact maybe you need to try something a bit tougher if you want it to survive, 3v perhaps.
Yeah, I just wanted to give the steel. It’s best chance at the “destruction test”
I really didn’t even sharpen it. That good wasn’t going for Ed retention just wanted to show that there was a edge. And it wasn’t chipping or rolling when I do a destruction test I don’t stop until that knife is in pieces. Lol
You get a sub for being the first American into millimetres
Lol millimeters make more sense to me
That blade would have been excellent for feathersticking.
Thank you but i push any new steel i use to limit. I don’t see any other videos of anyone breaking MAGNACUT intentionally. But I figured some people would be interested in knowing its limit
Which steel?
I like MAGNACUT steel for a knife over anything else,
But I also really like AEB-l
And a lot of the simple steals too
Great video Sir
Thank you I love breaking my knives
@@AaronJohnson1979 you have a website where you sell. I used to make knives but, six kids now and zero time
@@joelhunter984 Yep I have no time to make them right now either I have nothing for sale I work construction as an ironworker summertime’s are pretty busy for me I usually make most of my nights in the winter
@@AaronJohnson1979 good copy Brother!
What do you think about using magnacut for a 16 inch Bowie knife?
Magnacut is one of them steals that can do everything and everything exceptional. It is plenty tough enough to make a Bowie knife or even something bigger. It would make a great chopper or even a kitchen knife to a pocket knife to a fillet knife. It’s the best there is.
@@AaronJohnson1979 how about nitro V? Magnacut is crazy expensive!
@@wellregulated8725 if you look at Larrin Thomas videos or buy his book that he has, it really isn’t much advantages in Nitro V over AEBL
AEBL is cheaper then nitro V and AEBL is tougher by quite a bit pretty much the same edge holding nitro V has a little advantage on stain resistant, but I’ve never had a problem with AEBL
@@AaronJohnson1979 awesome man! Thanks! I am working on a knife and want to drop it in carbon steel and SS. Appreciate the response. Are you on IG?
I usually dont watch entire vids, this I watched, just got my hands on a Bark River Bravo 1
Lt Magnacut so I definitely liked what I saw here, My 3v is sweet but need to keep it dry, clean it well all the time,,, hell just using it to carve up steak stains it, needs to be polished out often,,,, Magnacut should allow a quick wipe on my pants and into the sheath with no issues.... I"ll have it out in the Everglades in a couple of weeks to beat the crap out of it,
Very cool Vid,,,👍
I have tried to make magnacut rust and it’s almost impossible without some kind of wild chemical the toughness is great and edge retention is great it’s definitely the king of all steel in my opinion
Im 1 min in the first Video of you i ever and you all redy have my full trust in your knoge
Thank you I appreciate that and I do believe misinformation is one of the biggest problems with knife making.
I love the trade and I hope it continues to grow and more people get into it
@@AaronJohnson1979 sorry vor my englisch im from germany.
Its all about gallery Knifes. Hardest and sharpest. The faces i get wen i ask vor 59hcr
@@johnatanfalck3021 One great thing about magnacut it has excellent toughness at a high HRC
Let me tell it like that I usually misshandel my blades gettingen a nail out of the board ect. So blades that snap like that Chip ass well. So i like it softer
@@johnatanfalck3021 I see, yeah you rather have a role than a chip I do too in certain situations for sure right hardness for the right job
9:19 what are you using for heat treat ?
I found a grocery store that sells dry ice and then I make a slurry with kerosene. Dry Ice and kerosene slurry is about -80 Degrees
@@AaronJohnson1979 very very nice idea
@@dimmacommunication I forgot where I read about this, You can use acetone and dry ice it gets a little colder but kerosene is so much safer to work with
@@AaronJohnson1979 Actually you can use ethanol too :) we get denatured ethanol easily here in Italy,also cheaper than kerosene.
@@dimmacommunication Well that’s good to know thank you for that information I appreciate it
Holy sh...
Lol right if I could afford it, this is the only steel I would use
Make me a knife with a purple handle damn dude
I got to get back into it. I haven’t made one in a couple months freaking holidays. Lol
Can this steel be differential quenched?
I have no clue about a differential quench, but yes do a cryo for sure
@@AaronJohnson1979 I wonder if it'd need a differential quench. I have a 80crv2 with a differential and I'm not sure it even needed it or benefits from it as an example. I have no idea with these new super steels. For example I've not heard of anyone or thing about trying it with Cpm 3v or any super steel for that matter, just as an example.
@@sirsir9665 Well with a long soak time And really high temperatures with these super steels you have to have them in stainless steel wrap so it would be kind a hard to differentially heat treat it in oil not saying it’s impossible but I honestly don’t know you probably would be better off heat treating it normal then bluing the spine with a torch
@@sirsir9665 keep in mind 80crv2 is some really really tough stuff it’s much tougher than magnacut you would be able to pass a ABS journeyman test with 80crv2
I highly doubt any stainless steel could pass that test even magnacut but I could be wrong
how much that raw steel cost you
About 50 bucks for a foot
@@AaronJohnson1979 makes the $75 Spyderco Magnacut Mule seem like a great deal.
@@BornIn1500 oh absolutely deal of a lifetime the folders will be 200+ i bet
Hell yeah brother
I HOPE you learned to USE MANUAL FOCUS on your camera
Its a iPhone 13pro and in cinema mode, I have a hard time getting it to focus on what I want
In the right hands, if properly stropped, one of your knives could easily defeat Chuck Norris in his prime!!🔪
Lol Just you saying those words the knife in my hands right now snapped in 10 pieces
@@AaronJohnson1979 Hahaahaaa, Seriously though, Jean Claude Van Dam could probably slice his way through Steven Seagal, Ralph Machio, Dolph Lundgren & Patrick Swayze with one of those mastefully engineered pig stickers You Smithed up in your insanely equipped garage. I gotta go back to sleep but i'll be watchin' more of your $#*@ tomorrow....Later 🔪
how warpy is this compared to something like aeb-l after heat treat?
Clamp MAGNACUT To a straight edge piece of aluminum before you put it in the cryo and you will have no problems
@@AaronJohnson1979 gotchya, i just use a dewar filled with LN and don"t have enough space for clamps :/ might just bolt some stuff together...thanks!
Stop for the love of god🐐
Lol!
Thumbs up for the sacrafice!!
I do that same testing on simple steel or any other steel I use for the first time can’t make any exceptions even for magnacut
This is one of the dullest knives i ever see.. specialy after sharpening... lol
Lol u are 100% correct I can’t argue with that. Yes this knife really never reached anything I would consider sharp. If you watch any of my other videos, I do know how to sharpen and I consider myself as being pretty decent at it. I didn’t think a higher sharpness level would affect the toughness, considering this is a
“”Destruction test not a sharpness test”” I do many sharpness testing on other videos, this one was just good old fashion blunt force, trauma testing, and it did awesome at that.
@@AaronJohnson1979 U are also talking in this video about edge retention in this knife. So it was legit to comment the sharpness
@@lyronixone4567 no I’ve got that comment a lot it’s definitely a legitimate comment to make for sure, about the sharpness. I wasn’t looking for edge retention. I was looking for edge damage when I was cutting through the paper which in a way is different than something going dull from cutting through rope or something abrasive. I was looking for hang ups like micro chipping or some type of physical damage to the knife. It’s a different form of edge retention.
But yeah, I should’ve been more clear. I made this video a long time ago, and I was still pretty new at taking videos and explaining things.
Shoulda bought a samsung lol
@@Drspank89 lol
Not only did you break the blade but it broke my heart to watch it too lol a disabled veteran like me very likely will never be able to afford such a badass knife so this really hurts to watch but like ya said "all in the name of science" 🤷♂️👍💪🔪
Thank you for your service ❤️
Now im speaking for knife makers, every new steel has to be tested and pushed to see what it can do. You can read and do research watching videos. But until its in your forge or oven in your own shop only after testing will you be comfortable using / making or selling a knife made with your own hands. Even expensive steel like magnacut, doing this test was expensive eat up belts and it was probably a $50 piece of steel alone. But I learned a lot and I know how far I can push the blade steel far as geometry goes. Not all steel’s can handle that kind of abuse that thin. Like 1095 could never be that thin and that hard and survive some of those tests! I had a hell of a time getting magnacut to even chip out it was hard to destroy the blade edge I almost ran out of things to hit it against.
@@AaronJohnson1979 indeed indeed I saw that, I am quite impressed with this new steel and based on the knowledge of the kid who developed it it damn well should be incredible! How would you say that it compares to cruwear or 4V- M4 even? I've been enjoying some LC200N lately the stuff is pretty impressive for the recipe 👍🔪 keep on building amazing blades sir and maybe one day I'll be able to buy one!
@@kevinAuman1 Absolutely and far as how it compares to 4v or m4, i’m really not sure I’ve never made a knife from either one of those steel’s. I just got a oven not too long ago so I’m playing around with all of these CPM steels I am by no means any kind of an experienced expert on it. At least not yet lol. There is a really good book By Larrin Thomas “knife Engineering” it’s got all of those comparisons strengths and weaknesses. Lotta charts and graphs I like that kind of stuff. I’ve made a lot of knives from simple steel but This cpm. steels I still have a lot to learn, So I won’t be selling any of those types of blades anytime soon but one day I will when I got it down
@@AaronJohnson1979 and how does one find your knives for purchasing?
@@kevinAuman1 I have no knives available for purchase right now but if I do decide to start selling them I will tell you first. As of right now I’m just having fun making them and making videos
Texan here. Metric is far easier. Great video.
Yes sir you and aaron can join forces and convert usa too metric 😁
@@knifesharpeningnorway lol right
SF
?
Entertaining to watch but absolutely useless test of the steel.
Lol right if anybody has to pound a knife through a nail they got bigger problems lol
@@AaronJohnson1979 - You called this steel correctly with “balanced” as it is both tough & hard with compromised edge retention, your testing bore these trait’s out. However the dynamics between steel type, hardness & blade geometry are complex and unfortunately your testing methodology may require slight refining.. but again it was entertaining! Every bushcraft blade has to cut mild steel nails, how else would we know?
@@ynotjf I did have fun making this video, and I hope one day the price of magnacut comes down a little bit.
A very poor demonstration. Badly ground blade, wrong angle. Fatal finish. I don't know what's going on here.
It’s just a distraction test doesn’t have to have a good finish doesn’t have to have a sharp edge. At the beginning of the video it had a very thick angle, at the end of the video it was a much thinner angle. I showed what kind of abuse it’s capable of taking
@@AaronJohnson1979 Too bad for this piece of steel. Every blade is destructible, and many steels have similar strength when properly hardened.
@@user-ww4od4jl1f Oh definitely I agree with that! Every time I start a new steel I do pretty much the same type of distraction test right off the bat, I try to use the same thickness around the same geometry just a rough test edge and I put it through a similar ringer anytime I try a new steel. Gives me a rough idea of where they stand amongst each other not scientific but in my garage that’s about as scientific as I can get lol. It really is a phenomenal Steel but in this video I was still getting used to working with it I really just started working with CPM Steel’s not too long ago so there’s definitely learning curves involved for me
@@AaronJohnson1979 Does anyone already make knives from this steel? I have several BRK knives with a CPM 3V steel blade and a Fällkniven with 3G blade. There is definitely no perfect steel; each has a weak point. It cannot be rationally explained, but I like knives. Classic, not Star Wars design ;-)
@@user-ww4od4jl1f Well bark River makes Knives in magnacut now also and Gary creely
That was so cringe worthy/awesome!
Thanks bro I appreciate that
What a waste of time and great steel! Your tests have nothing to do with how a knife steel will hold up under real life usage! I can throw a rock through your windshield, but that doesn't mean it's not strong! 🤔😵😡
But it would be fun to throw a rock though the window lol
But all kidding aside, the name of the video is not real world usage. The name of the video is magnacut destruction test and in order to break this steel and destroy it. This is the kind of stuff I had to do you didn’t have to click on it and it wasn’t click bait I destroyed it, I did what I said I was gonna do,, it’s not a edge retention test it’s not a sharpness test hell it’s not even a knife test,, it’s a MAGNACUT destruction test and that’s what it was.
Looks like a great pocket knife steel
I agree 💯