How to Install a Smart Home Light Switch - WiFi smart switch with RF 433Mhz remote control function
Vložit
- čas přidán 22. 10. 2018
- Our Official Site: www.qiachip.com/
Purchase Link:
1. www.aliexpress.com/item/40001...
2. www.aliexpress.com/item/40005...
WiFi smart switch with RF 433 Mhz remote control function
After the wiring is completed, turn on the power and operate according to the status of the smart switch indicator:
1) If the blue light of the smart switch flashes continuously at this time, it indicates that the smart switch has entered the state of waiting for connection to WiFi; then open the APP and follow the instructions to connect to WiFi.
2) If the indicator light of the smart switch is not flashing blue light, please press the button of the smart switch and keep it for more than 5 seconds until the blue light flashes continuously, then open the APP and connect to the WiFi according to the manual.
Scan the QR-code of the manual or Search ‘ Smart Life ’ to download and install the device's APP
How to match smart switch with 433Mhz RF remote control?
This smart switch has 3 working modes to match the 433Mhz RF remote:
(smart switch, hereinafter referred to as: receiver)
Matching method:
1. Setting momentary Mode:
Press the receiver's Learning button 1 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's button, the receiver's red LED will flash then come off, Setting successfully.
2. Setting Toggle Mode (Common working mode):
Press the receiver's Learning button 2 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's button, the receiver's red LED will flash then come off, Setting successfully.
3. Setting Latched Mode:
(Note: When you choose "Latched Mode", you need to setting two different buttons on the Remote control, the first time learn is for “ON”, the second time learn for “OFF”.
For example: button A = ON, button B = OFF)
Press the receiver's Learning button 3 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's A button, the receiver's red LED will flash and then remains lit; Then press the remote's B button, the receiver's red LED will flash then come off, Setting successfully.
Note: A Smart Switch can only store 12 buttons (on the remote). Saved button number of more than 12, it will cause all of the stored remote control cannot control the Smart Switch. You need reboot the power and reset the RF remote control settings (press the Smart Switch's matching button 8 times) - Věda a technologie
Where to order this switch please ?
It is on our official website, you can check out this link.
qiachip.com/products/best-wifi-smart-switch-wireless-remote-control-light-timer-relay-switches-110v-220v-home-automation-module-with-kt1000-pair-with-ifttt?token=EC-3NM52798KH7904353&variant=22446084227120
If you are not satisfied with the price, package or other issues, you can send us an email(qiai@qiachip.com) to give us feedback.
We will respond to the problem in a timely manner and facilitate the order!
Nice vid you just solved me the problem I had wondering if it's only one or more switches I can connect to the device
Solid Video, my main question though is what device are you plugging the leads into? I absolutely cannot find anything similar anywhere.
Hi ! the surge protector that appears in the video to connect the smart switch wires please tell me where you bought it. Thanks!
Thanks
Hi, is it posibble to use one switch connect with 3 lamps in one group, or it only can connect with 1 lamp?
Can we connect multiple devices like fan bulb with one device or we need multiple devices ?
hi. how many wireless switch can the relay handle? and how may relay can the wireless switch control?
Can i switch on/off from different locations e.g. from work to switch lights at home.
Yes, you can.
Hello I have a problem with my remote sensitive swich, it connects or diconnect but not both any idea of what I should do Thanks
hi, that's perfect but do you use any hub to connect all the devices or they're like stand alone?
They're stand alone. You just have to connect to the power source in order to use them. You can know more about us on qiachip.com/ or qiachip.aliexpress.com/store/2138259?spm=2114.11010108.1000002.18.650c649bEFAvKa
Question: Should I have to repeat to register/mode-set every time after main power failure?
No need, not affected by power failure
it can work at 12v input and output
Hey, can you help me...??? How do I connect the physical wall switch wirelessly to the wifi module switch...???
How do you wire in a physical switch as well the module?
Are these switches available in Bangladesh?
WELL I LIVE IN THE SECOND FLOOR, IF I ATTACH THIS REMOTE BUTTON ON THE MAIN ENTRACE, IS IT POSSIBLE TO GIVE TE ORDER ON THE MAIN CONTROLLER ON THE SECOND FLOOR (NOT INSIDE BUT OUTSIDE FROM HOME)
YES ,HOW FAR ? BY THE WAY,TUYA Smart Products have been launched on Amazon-US on March 3!
In order to thank everyone for your attention and support to our brand, we have separately prepared a time-limited new claim activity for your region;
We hope we can bring something positive to your day-as our way of saying thank you for supporting us.
Get free,pl contact email:daisy@rodotdiy.com
Coupon code: 15RODOT12
www.amazon.com/dp/B08VDXDFM5
Have diming option? Like using Alexa and say: Alexa turn room light at 30%.
No, only switch options
Unfortunately, I ordered several pieces from this module and its associated switch. The RF part is not interference-proof, other RF devices (motion sensor, opening sensor), but even its own switch can interfere with the device. It was very annoying when someone moved in one room and the module turned off the lights in the other. The manufacturer was not very helpful, I kept telling me to send the modules back for testing until the refund guarantee expired.
Is the update solved your issue?
@@ShZubairAhmed No. The final solution was to replace the relays with Sonoff devices. I can use the switches with a Sonoff RF bridge running Tasmota firmware.
I mouted two set for two bed room near and have a trouble when i press button off room A or room B it turn ON and OFF two room A and B simultanious, how can i set to control several each room for each indipendent Button
Hello, you should be interfering during pairing.
You need to pair again
First, you need to clear the code separately (press the button on the controller 8 times)
Then re-pair individually (pair according to the mode you need)
What app do you use?
TUYA Smart or Smart Life
is there an api for it? bc i want to use it on our application
Sorry, it doesn't provide API yet.
Nice video. This is the way to do smart light switches. But those large white remotes--can they be wired into the house so they don't need batteries? Any special consideration for this? Some show a place for the wires but say maximum 2AMP...??
What battery type for remote?
CR2032
Neste sonoff como fazer para resetar e entrar no modo de pareamento
Basta segurar o botão apertado entre 5 e 10 segundos. A luz vai começar a piscar e ele vai resetar e entrar no modo de pareamento.
Eu comprei 5 peças e nem uma funcionou, segui vários tutorias mas acho que recebi um lote com problemas, a luz azul de configuração nunca acendeu.
Does It possible to solder a physical button on this device?
What are your detailed functional requirements? We can customize according to your requirements.
@@qiachip Is it possible to make a parallel connection with a normal physical light switch? I want to turn on/off a lamp with RF remote control and a light switch too.
@@mxr4k101 Yes,we have.
@@qiachip In a parallel connection with regular switch (127v), if the lamp will be turned ON from remote control, and later, the switch will be pushed,
what will happen to the lamp? Will be OFF or continues ON?
এগুলো সুইচ কি বাংলাদেশে পাওয়া যায়
works with google home or only Alexa???
Luis Gatica works with google home, I strongly recommend you to use it with IFTTT. It is just way more convenient.
qiachip.com thanks I just or Ordered one
Mg Kano mam sir
no sound
Amazon's new products are on the shelves, we give away 50 sets for free, a total of 400 pcs, please email daisy@rodotdiy.com
www.amazon.com/RODOT-Wireless-Compatible-Assistant-Required/dp/B08VDCP1JY