I am so pleased and so happy for you that things are working out with the batteries . It is a little bit of an investment, but I have to say it’s well worth it and I can’t wait to get those next four batteries. Thank goodness for a good friend in GBear that was able to help you. You won’t have to worry about power anymore🎉🎉
He sure is! Helped me out tremendously! I would of never changed over to 48v without his help! I'm sure glad I switched! God bless brother thanks for stoppin by!
You've done good bro.....those gel batteries can still serve though.....and if you don't need them anymore, then please find a home for them that does need them :) Bless
If you make changes with the overkill solar app. With used solar panels I wonder why they are being replaced. If a new roof is needed and the labor is so much and solar panels are so cheap may be one reason. Another maybe there has been failure with some and it is cheaper to replace them all instead of trying to find the bad ones. If that is the case will others have failures? I have questions also. I hope you got good ones. It might not hurt to keep an eye on maximum out put now and keep a log and if you see a decrease check the strings that are low. A good reason to have two strings the same so you can compare the out put at any time.
@JR-xw5dk that's excellent advice I had the solar split into 2 1250w systems but with the old batteries I wasn't getting the charge needed, now I may have to split them again!
@JR-xw5dk the used panels we bought, the guy went to a different system that didn't require so many panels plus the building they were mounted on he tore down!
There are balancers for 12v batteries in series. If your has Bluetooth you should be able to adjust the cutoff voltage on the high and low side. How much is your idle consumption?
Our cut off is at 46v it was done through the all in one! I'm still trying to figure out the monitor/shunt so far I'm disappointed in it the blue tooth range sucks! I'm not real sure about idle consumption I'm not a tech guy! Lol I've learned all this on the fly!
@JR-xw5dk These Li Time batteries are good for 4S4P already with 200A BMS's. If Tony puts 16 of these on his system, he could power his neighbors too.😁👍
@@tonylarson1960able if you have the 12v cut off at 11.3v and the system at 46v it you let you know if they are not balanced and you would lose power, but if that happens you know you have a low battery. You can get it back and running by lowering the cutoff of that battery back down to the original setting.
@JR-xw5dk the batteries are ran in series and we are running a 48v system at 240v split phase output! Since we have switched over our power loss after sunset is only 4v nighttime readings the batteries are at 52.7v and batteries are still showing full! I hope this is what you are talking about! Like I said I'm not an electrician or tech guy GBear help me set everything up! I'm still learning this stuff! I'm a retired heavy equipment operator! Ask me about moving dirt I'm your guy! This stuff has been a new venture for me! The fact that I got it working is a great feat for me!
Is that a low frequency sun golden? I’ve been eyeing those. Love the lithium, they can charge quickly and then the rest is free juice run em if you got em.
@@tonylarson1960able is it really heavy? Low frequency inverters are old school with large copper wound transformers. They handle large motors very well. They do use more idle current but last a long time due to simplicity of the load delivery. A 5000w inverter can handle a surge of 15000w for several seconds. High frequency inverters are lighter in weight and can be easily paralleled to add more power later if needed. They are more energy efficient but use mosfets instead of large copper transformers to deliver power. A 5000w can handle 10,000w surge for less the. A second in most cases. They are newer technology but have come a long way in a short time. Durability is the question with all the circuitry involved and many mosfets have been replaced by owners that have burned them out. IMO it’s best not to push high frequency inverters beyond 75% of rated power if you want them to last. Either way, I’m glad for you it’s nice to have a reliable power supply to keep cool in this heat.
Some inverters like my old one did not charge past 60% was a firmware fault, no BMS maybe that happened to your old batteries, half charging. I would test 1 of each 12v style and compare the output, or charge with something else, your old batteries might be better than you think just never got a full charge. Took my bank 5 days to get a full 51.6v after 5 months of only half charging and it had more than enough pv to use, Pb C batteries are 100%@51.6v, 3 months straight of float maybe 1 hour of absorb, they can now hold up to 52.6v. Downside if your batteries were never 100%, most likely too damaged to rebound 100% after years of PSOC. Never trust the inverters voltmeter , multimeter check the battery leads on absorb, float and resting, even my new one I had to drop charge by 2V, I know of 5 brands that do the same thing, even Victron can be wrong.
Thanks Bob you are right I never had my 200ah batteries at full charge! I had an incident yesterday where I lost power in my all-in-one. Turns out I had two battery cables that I made that failed and I went down to 6v in the lifepo4s so I ran the generator and let the solar recharge the batteries and was back at full power in roughly 10 hours! Have had no problems since and at night we are at 52.8 volts with full bars on the meter! And my shunt is like .03 lower than the all in one! It's a fantastic system dang near worry free! Thanks for stoppin by Bob God bless!
@@tonylarson1960able .3 is minor but check the charge rate the variance can grow while charging, easy fix lower the inverter charge till the meter reads right.
@bobmonztr Interesting thanks! I've still got alot to learn about this system I'm not tech guy or electrician! I had alot of help from gbear! My wife Lee Ann is our tech person she figures out how to do the settings! Lol I'm more the build it guy!
We live totally off grid. Our land is paid for our rvs are paid for! No water bill, no sewer bill, no electric bill! We have extra money! So, no, not kidding! Thanks for stoppin by God bless!
@@tonylarson1960able ya i live in town every things is paid for thank god so still on grid moving off a little at a time doing my own thing no help working with 7000 watt reliable inverter if i go off grid ill have to pay
FANTASTIC! I'm so happy for you two up and running efficiently!
@GBear your help was a blessing! We wouldn't have taken this leap without your advice! Thanks brother!
👍🏻👍🏻@@tonylarson1960able
Thanks fir the shoutout, too!😂
@GBear 👍👍👍
It’s great to see things running like you need it to, hope you both have a blessed day and weekend my friend.
@RandWFarmstead-TonyWalsh it's so gratifying to accomplish such a feat! Alot of head scratching nights! Thanks for stoppin by God bless brother!
You guys are hardworkers, well done.
@MickyBellRoberts thanks brother it's been a learning experience! Thanks for stoppin by brother God bless!
Nice vidio ..thanks for share my best friend ..full support
Thanks for stoppin by God bless!
Thanks Tony for the update! God bless! 🙏🏼🫡🫡
@billm5433 thanks Bill and thanks for stoppin by God bless!
I am so pleased and so happy for you that things are working out with the batteries . It is a little bit of an investment, but I have to say it’s well worth it and I can’t wait to get those next four batteries. Thank goodness for a good friend in GBear that was able to help you. You won’t have to worry about power anymore🎉🎉
@Deendougretired
He is a blessing that's for sure! Thanks for stoppin by God bless guys!
@@tonylarson1960able you’re welcome. I’m so so happy for you.
that is great , stay cool out there in the heat of summer
Thanks so much and thanks for stoppin by God bless!
Thats an awesome system! I'm glad its working well for you!! Good luck with everything my friend!
Thanks brother and thanks for stoppin by God bless!
Good stuff!
Thanks and thanks for stoppin by God bless!
G Bear must be the go to man for solar system advice.
He sure is! Helped me out tremendously! I would of never changed over to 48v without his help! I'm sure glad I switched! God bless brother thanks for stoppin by!
Good evening I’m sitting back. I’m watching.
@Deendougretired Thanks for your support! I'm fixin to watch your latest video! I'll yack at you then!
@@tonylarson1960able please don’t yak at me😂😂😂
@Deendougretired
lol that's funny!
That’s awesome 😎 I don’t understand the solar batteries but awesome you figured it out
It's so cool to get things right finally! Thanks for stoppin by God bless Steph!
@@tonylarson1960able congratulations 🎊🎈🍾 I’ll be back again stay cool out there
You've done good bro.....those gel batteries can still serve though.....and if you don't need them anymore, then please find a home for them that does need them :)
Bless
Thanks! We're going to re-purpose 8 of them and probably sell the rest! Thanks for stoppin by God bless!
sounds like they are some good batteries!
They far exceeded my expectations! I highly recommend them! Thanks for stoppin by God bless guys!
swamp coolers that what i run in fl it works for me save on elec run on little solar junk panels
The humidity has been crazy high for the desert this year swamper not very effective! Crazy 110°+ heat doesn't help either!
@@tonylarson1960able if we have a hurricane the swamp cooler is better the noting is how i look at, but so far here its been in the high 90s
If you make changes with the overkill solar app.
With used solar panels I wonder why they are being replaced. If a new roof is needed and the labor is so much and solar panels are so cheap may be one reason. Another maybe there has been failure with some and it is cheaper to replace them all instead of trying to find the bad ones. If that is the case will others have failures?
I have questions also.
I hope you got good ones. It might not hurt to keep an eye on maximum out put now and keep a log and if you see a decrease check the strings that are low. A good reason to have two strings the same so you can compare the out put at any time.
@JR-xw5dk that's excellent advice I had the solar split into 2 1250w systems but with the old batteries I wasn't getting the charge needed, now I may have to split them again!
@JR-xw5dk the used panels we bought, the guy went to a different system that didn't require so many panels plus the building they were mounted on he tore down!
There are balancers for 12v batteries in series. If your has Bluetooth you should be able to adjust the cutoff voltage on the high and low side.
How much is your idle consumption?
Our cut off is at 46v it was done through the all in one! I'm still trying to figure out the monitor/shunt so far I'm disappointed in it the blue tooth range sucks! I'm not real sure about idle consumption I'm not a tech guy! Lol I've learned all this on the fly!
@JR-xw5dk These Li Time batteries are good for 4S4P already with 200A BMS's. If Tony puts 16 of these on his system, he could power his neighbors too.😁👍
@@tonylarson1960able if you have the 12v cut off at 11.3v and the system at 46v it you let you know if they are not balanced and you would lose power, but if that happens you know you have a low battery. You can get it back and running by lowering the cutoff of that battery back down to the original setting.
@JR-xw5dk the batteries are ran in series and we are running a 48v system at 240v split phase output! Since we have switched over our power loss after sunset is only 4v nighttime readings the batteries are at 52.7v and batteries are still showing full! I hope this is what you are talking about! Like I said I'm not an electrician or tech guy GBear help me set everything up! I'm still learning this stuff! I'm a retired heavy equipment operator! Ask me about moving dirt I'm your guy! This stuff has been a new venture for me! The fact that I got it working is a great feat for me!
@@GBear Batteries don't make power. They store power.
Is that a low frequency sun golden? I’ve been eyeing those. Love the lithium, they can charge quickly and then the rest is free juice run em if you got em.
@WattsinWattsout
50/60Hz it says in the book!
Thanks for stoppin by God bless! We are really impressed with this new system!
@@tonylarson1960able is it really heavy? Low frequency inverters are old school with large copper wound transformers. They handle large motors very well. They do use more idle current but last a long time due to simplicity of the load delivery. A 5000w inverter can handle a surge of 15000w for several seconds.
High frequency inverters are lighter in weight and can be easily paralleled to add more power later if needed. They are more energy efficient but use mosfets instead of large copper transformers to deliver power. A 5000w can handle 10,000w surge for less the. A second in most cases. They are newer technology but have come a long way in a short time. Durability is the question with all the circuitry involved and many mosfets have been replaced by owners that have burned them out. IMO it’s best not to push high frequency inverters beyond 75% of rated power if you want them to last.
Either way, I’m glad for you it’s nice to have a reliable power supply to keep cool in this heat.
Some inverters like my old one did not charge past 60% was a firmware fault, no BMS maybe that happened to your old batteries, half charging. I would test 1 of each 12v style and compare the output, or charge with something else, your old batteries might be better than you think just never got a full charge. Took my bank 5 days to get a full 51.6v after 5 months of only half charging and it had more than enough pv to use, Pb C batteries are 100%@51.6v, 3 months straight of float maybe 1 hour of absorb, they can now hold up to 52.6v. Downside if your batteries were never 100%, most likely too damaged to rebound 100% after years of PSOC. Never trust the inverters voltmeter , multimeter check the battery leads on absorb, float and resting, even my new one I had to drop charge by 2V, I know of 5 brands that do the same thing, even Victron can be wrong.
Thanks Bob you are right I never had my 200ah batteries at full charge! I had an incident yesterday where I lost power in my all-in-one. Turns out I had two battery cables that I made that failed and I went down to 6v in the lifepo4s so I ran the generator and let the solar recharge the batteries and was back at full power in roughly 10 hours! Have had no problems since and at night we are at 52.8 volts with full bars on the meter! And my shunt is like .03 lower than the all in one! It's a fantastic system dang near worry free! Thanks for stoppin by Bob God bless!
@@tonylarson1960able .3 is minor but check the charge rate the variance can grow while charging, easy fix lower the inverter charge till the meter reads right.
@bobmonztr
Interesting thanks! I've still got alot to learn about this system I'm not tech guy or electrician! I had alot of help from gbear! My wife Lee Ann is our tech person she figures out how to do the settings! Lol I'm more the build it guy!
what extra money are you kidding
We live totally off grid. Our land is paid for our rvs are paid for! No water bill, no sewer bill, no electric bill! We have extra money! So, no, not kidding! Thanks for stoppin by God bless!
@@tonylarson1960able ya i live in town every things is paid for thank god so still on grid moving off a little at a time doing my own thing no help working with 7000 watt reliable inverter if i go off grid ill have to pay