KTM 390 Adventure | Upgrading ECU & TFT Ride Modes | ADVinJapan #43
Vložit
- čas přidán 8. 09. 2024
- [Update: it appears the dealer needs to receive an ABS hex file from KTM central, which they can do by contacting central office. Once this is done, the upgrade should he smooth saling. If the dealer is giving you trouble, its likely they dont have the tools to get the job done, or they simply are pretending its impossible in order to get you to buy a newer model. In any of those cases, just find another dealer whos will to do this.]
Greetings Adventurers, in today’s video I recapture the entire process of upgrading my 2021 KTM 390 Adventure ECU and TFT. This upgrade will give you the ride modes only available to 2022 factory models and above. If you are interested in upgrading your 2021 or 2020 390, it's not quite as straight forward for many people and in this video I show you why that may be the case and how to overcome it. I hope this helps!
冒険者の皆さん、本日のビデオでは、2021 KTM 390 AdventureのECUとTFTのアップグレードの全工程をご紹介します。このアップグレードにより、2022年以前の390アドベンチャーでもライディングモードを使用できるようになります（2022年以降のモデル専用）。2020年または2021年モデルの390のアップグレードに興味がある方は、このビデオをご覧ください。
Facebook: / advinjapan
Instagram: / advinjapan
#KTM #Motorcycle #travel
Music from Artlist.io (in the order they are heard)
1. Alex Grohl - Beer House
2. Dizzy - Newer
3. SLPSTRM - Music Tree
![#27 - KTM 390 Adventure | Fuel X lite & Airbox Lid Install [UPDATE]](http://i.ytimg.com/vi/NpEqZQbVuH4/mqdefault.jpg)
![#27 - KTM 390 Adventure | Fuel X lite & Airbox Lid Install [UPDATE]](/img/tr.png)
Finally I have managed to get the ride modes on a 2021 model in Europe.
According to the workshop, SW version 1.10 already contains the ride modes, but only needed to be activated.
And as far as I've seen, activation is possible only with newer version of the diagnostic tool.
That’s great to hear! I’ve heard from so many people with similar stories, all different solutions 🤣
Whilst I don't own a KTM it just goes to show at times our own research its so important !!
So true my friend, so true.
I asked about the upgrade at the last service of my 2020 390, but was told it was not available for my bike. That lack of the gravel mode was one reason that I have since traded my 2020 390 for a new 2023 model. Very happy so far, but have not yet tried it on gravel as I haven't installed a bash plate or engine guards. Interestingly the new bike without any engine mods goes better than the old one with 14 tooth sprocket, and removal of the tool tray.
I see, that’s too bad they couldn’t figure it out. But at least you’ve got a new shiny bike🤟🏻. Yes, 14 sprocket makes an awesome different totally agree. Put a fuelx lite on there and you’re be even happier.
Does it? Do you know why it's pulling better than your previous bike? I don't think there were physical modifications that would help that, but I could be wrong. A more aggressive base ECU?
I don't know why, it could be just a newer fresher engine, or the difference between bikes. The mechanic did say the 2023 had a different ECU to the earlier models. I wont do the fuelx / exhaust mods until the warranty runs out. Dont want to give them any excuses if something goes wrong. Engine bars, skid plate, bar risers etc. go on tomorrow. One good thing about buying the same model bike is all the accessories just swap over. save some $$$$ for travel.
That chest plate is hardcore. You should shoulder a lance on that thang, charge down the road and take out a few trucks along the way... 😉
Hahaha, I love it!
Great that you manage to upgrade it. Looking forward for your off road mode review!
Thanks, I’ll see if I can manage to put something together.
Good video. I have a 22 so it has the off-road mode. I have only used it on gravel, so i have no idea how it would be in mud, but i am happy with the gravel road performance. I should turn everything off, but havent needed to.
Thank dude. From what I hear, there’s no need to mess with anything once you’re in off road mode. But I’m gonna test this out and put up another videoS
I have tried three dealers, so far none even have 10 available. Sigh... Glad you were a me to get to done! - Frank
That’s a bummer, I’m sure they’ll have it at some point. 👍
Definitely something I need to get around to sorting out, especially with riding more difficult terrain therefore stalling it more :D
It’s a game changer so far for me. Love the new ride modes!
I did this recently on occasion of 15k service. All pass without issues, at least technicians haven't mention any problems. Honestly speeking I don't feel very big difference,
besause I mot very experienced rider. So far I had chance to test it in mud, in sand I haven't tested yet, so will see. But assume only knowing that TCS let for more rear wheel spin helps a bit :)
That’s great to hear. I have yet to test, but so far I am liking what I feel off road. How was that 15k service? Was the valve adjustment pretty expensive?
@@advinjapan I did 15K service combined with lowering of the bike and renewing fork oil seals because they start leaking. I live in Poland and did it in authorized dealer workshop. All cost approx 470 EUR (2080 PLN) and it was double I paid for 7,5 k service
The mechanic didnt know there was an ABS code because the ABS doesn't throw an engine code, it throws an ABS code. You don't see an ABS code unless you specifically scan the ABS system for it. And without a customer complaint, service to the ABS system, or the ABS light on the dash lit up, there isn't any reason to do it. Now that they know the ECU can't be updated with a grey ABS code im sure they will start scanning the ABS codes going forward now. Live and learn.
Thank you Logic, very good to know 🙏
I've gone to a Canadian dealer twice - half a day each visit - and as a result ended up with a constant warning TC light on and no ability to disable my traction control! Yes, it was always ON. Then on my trip to Wyoming and Montana, I went to Hi-Tech Motorsports in Billings and the guys there after a few hrs tinkering discovered a solution. As long as my bike was input into their software as 2020 model, no update was available. As soon as it was connected to their computer and they input my bike as 2024 model, the ride mode updates become available! Now I have the ride modes and I can disable TC and choose ABS as Street of Off-Road mode.
Gold information! Thanks a lot, and glad you got it all sorted out!
Wow, that is great work! I have a 2022 and unfortunately did not have Ride modes at delivery (sept 2022). At the KTM dealer, I asked for a software upgrade last september together with the 7500km service, but they didn't find any upgrade. They said that it's probably not ready enabled for my chassis number. I will contact KTM Netherlands myself to ask for more info. Still hoping for this upgrade, but I'm happy for you bro!
Someone else mentioned here the same problem. They had the dealer contact KTM central and they received the upgrade from them allowing the dealer to then install the update. Hope this helps🫡
I had the same issue in the UK. It only upgraded to version 10. On further investigations they discovered that I had a headlight fault error that was preventing the update. I am waiting for a call back but maybe thats the difference between UK and Japan. 😂
🤣🤣 yeah a huge difference in service. Though to be fair, I had two other dealerships completely ignore me as well.
A bit different experience in my case... I had a 2022 model without off-road mode. I contacted KTM and they told me that factory enabled off-road mode has to do with the serial number of the bike NOT with the year of the model. I also had software v1.10 on TFT by the way... The dealer tried to see if there are new updates for my bike in order to get the off-road mode but they weren't. They contacted KTM, and KTM provided them with an extra update - that wasn't available to them in the beginning - that finally got me off-road mode installed. So, to the people that their dealers say they don't have any newer updates, it's probably the truth. This needs to be figured out with communication between dealer and KTM. By the way, a small correction on your video, even after the latest updates MTC returns to ON with an engine restart. It's the riding mode that doesn't reset. Thank you for another great video! Cheers.
Hey thanks for this. Actually I have a feeling this is what happened in my case too. While I did have that abs error, my guess is they also received instructions from central office on how to get it done. Glad you worked it out dude!
As for the correction, that’s actually what I meant, I guess I worded it wrong 🥴.
I have a 2020 in the USA I’m trying to get Offroad mode updated. Hope it works!! I’ll be showing my KTM dealer this video if they have trouble. Many thanks!
The description and also comments have tons of valuable info too 👍
@@advinjapan thanks for the reply! I have read all the comments and it seems hidden ABS codes can prevent the Offroad ride mode updating. But as far as you know, a 2020 390 in the USA can get the Offroad ride mode? Is there any difference between countries that would limit that to your knowledge? Thanks for the help! Also subscribed!
@flyinghigh370 believe it or not, I just found out mine is also a 2020 😂😂. There’s no reason why you shouldn’t be able to.
@@advinjapan thanks! I was afraid I made a mistake in buying this for my girl to learn adventure riding on, if it doesn’t have Offroad mode!
@@advinjapan so I just got off the phone with the KTM dealership in Colorado, USA. He said he was talking to the main KTM service rep for the United States based in Ohio and said there’s absolutely no way to get an update on the older 390s to get an off-road ride mode unless you do a manual upload, and there are only two people in the United States who can do a manual upload. He was one and he said there was another guy in California, but that was for research and development purposes only. So I’m not sure how you were able to get that unless it’s the fact that you’re in another country and the update is available in a different country. But as far as the United States goes, there is no way to get off-road ride mode on a 2020 or 2021 390. 😭. I have not really had a chance to test this bike out in the dirt as I just bought it and the girlfriend has been riding it a little bit. But it doesn’t seem to me that it would work nearly as well as a 2022 with Offroad ride Mode. What are your thoughts on how your bike handled dirt trails before you got the update? Can it climb dirt hills and spin the rear tire enough to actually make it up to the top or do you lose all momentum?
For me, it was quite surprising experience. Just regular oil change activity, then suddenly the shop owner asking me if I'm interested to get the updates. Not sure if it's beneficial at that time, but hey, any upgrade supposedly giving some benefit right? So I agreed, then voila, I got ride mode! And IT IS THE BEST!! ❤
Yes, I totally agree. I’ve got a video coming out very soon where I have out the ride modes and ride settings to the test. Ride modes are a clear winner for me too!
Hey mate
First of all I would like to say that I really like your videos and got a lot of information about the KTM 390 Adventure. Thank you very much for that. Of course I follow your channel because the information helped me a lot. It's a shame you don't have more subscribers, but I'm sure they won't be long in coming if you continue at this high level.
I appreciate your work and the effort you put into your great videos.
All the best from Berlin/Germany
Vielen Dank! I really appreciate the kind words🙏
I tried to get my dealer to do this about a year ago on my '21 and they had no idea what I was talking about. Of course talking to KTM was zero help. I want to go back to the dealer and show them this video. I think my software version is 1.10, what software version(s) does your TFT/ECU show?
Yes, that exactly why I made this video. Yes, I have version 10. You need to ask them to call KTM central. It could be an error code that needs clearing, or they need further instruction/software for this upgrade. Don’t give up. This is totally doable. If they still can’t help, find another dealer.
@@advinjapan I ended up buying a '23 because of this and probably fell right into KTMs game plan. I still have the '21, as I was using it more for street and turned the '23 into more of a rally bike, but I still want to get this done to the '21 because I want my GF to be able to safely use it off-road. When I contacted KTM about this the always rude customer service rep tried to tell me it is only available in countries where they use the Bosch programmer and not in countries where they use the Siemens programmer. I work in tech and highly doubt this makes a difference, unless the Siemens programmer can't program the ABS module because it is made by Bosch, but that still seems unlikely. Do you know if they use the Bosch or Siemens programmer in Japan KTM dealerships?
@@El_Rudo yeah, it’s a completely mess. The fact that even central office has no clue just says everything…I’d have to ask the guys there. I’m not sure which want they used.
If in Japan they took a month to call back I'm scared to ask about it here in Paraguay 😂... I'll try by the way. Thank for the video, then I can show that it's possible at least. My bike is 2021 and the TFT is suitable I guess.
If they reject you at first, try another dealer. You have better chances in larger cities.
@@advinjapan We have only one and really bad, it's a shame that we don't have a good dealer in the country. But let's see what they say, maybe I'll find one in Argentina. Thanks man! One more subscriber. 👊✊
Good luck, and thanks for sub brother!
Cool...
🙏 thanks!
I'd been wondering for a while how possible this was. Since all the models over the years look physically identical, I thought it must just be software.
Also, how long have you had your iPhone mounted on a quadlock? I just make a 3D printed quadlock adaptor for the GPS mount on the tower, and I've been worried about damaging the OIS in the phone's cameras. I was just going to swap my SIM to an old phone for riding, but doing that every time would be annoying.
Yeah, dude, get er’ done, it’s a great upgrade.
I actually just switched to the Aliexpress CarPlay navigation (MaxCA C5 pro). Super affordable and works like a charm.
@@advinjapan oh no, I have the '22 model. While it doesn't affect me I'm still curious.
Will you have a video on the carplay device?
@@SuperFrodo95 oh my bad, I see. Yeah, I actually just released it: 2023 #34 - AliExpress MAXCA C5 Pro Motorcycle Navigation Unit | Unbox & Install
czcams.com/video/mPSXdQSGGrI/video.html
hi advinjpan. did you remove your fuel x lite when they perform the update? and do you need to reaet the auto tuning in the fuel X since its a new firmware on your ecu?
Hey thanks for the comment. No, I did not remove the fuelx lite. According to Powertronic, if any modifications are made to the bike that affect the air/fuel mixture, all you need to do is let bike idle for two minutes before use. You only need to do this once. After that, 30 second idle is probably good enough.
@@advinjapan thanks for the update. big fan of your channel. subd.
@@ronaldsanpedro4338 thanks a lot brother 🙏
Is anyone here, dealing with any noice coming from front head or key switch area while riding? (It is like rumbling/ratelling noice) and it is getting louder and louder as the days passes. And yes it is not coming from fuel lid i checked it multiple times. Plz anyone out there who could help me with this, would be great.
I would try searching the KTM 390 adventure forum on Facebook. facebook.com/share/Xi7DBprALexuLZzi/?mibextid=K35XfP
Same story, 2021 model, KTM guy didn't find any updates.. I'll come back and try to explain about abs code, thanks
Yeah, they need to contact KTM central to get the abs hex code file. Be a nice as you can, we all know how mechanics get real mad when we tell them what to do 🤣.
I finally got this update 🎉 as you say it's linked only to the ABS module , very happy, thank you again for your video 👍
@kaveag awesome, so glad it worked out! Enjoy those modes!
Hello my friend. I get the message ECU FAILURE any time I ride my 390 a venture MY2020. Do you have any idea about his problem???
It could be a number of problems. When does it happen, as soon as you turn on the bike?
Wait, i have a 2024 Adventure in the UK and it resets the MTC every time i stall...am i missing something here?
Do you have the upgraded ride modes? If you do, only cycling the key will reset MTC, a stall shouldn’t.
@advinjapan I have the ride modes, Offroad, Road etc. Abs modes, Offroad and Road but if it stall I have to turn MTC back off? I thought that was always the case. Weird. EDIT: awesome channel BTW. Do you have a clutch lever swap tutorial somewhere?
Hey thanks a lot! I don’t have one, but it’s super simple. 1. Remove clutch switch, 2. Remove clutch cable. Done reverse for install. Clutch switch is underneath the lever. Sorry about the MTC, that is weird.
Hi, did you have to disconnect the FuelX module for the update?
Hello, nope not at all!