✨ WHIRLPOOL WASHER NOT FINISHING CYCLE - EASY FIX ✨
Vložit
- čas přidán 27. 03. 2021
- ✨ WHIRLPOOL WASHER NOT FINISHING CYCLE - EASY FIX ✨
This video shows easy steps to fix your Whirlpool washer that Is not Finishing the cycle.
Symptoms:
* Doesn’t finish cycle
* Continually drains
* Door won’t open
This is caused by Too much detergent.
This video shows how to Easily manually unlock the door which resets the washer and solves the problem.
If your whirlpool duet washer is not finishing its cycle, here's an easy fix!
Sometimes the door on a whirlpool duet washer can get locked, preventing the machine from completing its cycle. In this video, we'll show you how to fix the problem easily.
By following our simple steps, you'll be able to get your whirlpool duet washer back in action in no time! Thanks for watching!
Just Takes 5 Minutes To Reset.
NO PARTS NEEDED
Click Here for a Step-by-Step Article that you can Print as a Reference While your FIxing the Locked Door: appliancefixesmadeeasy.blogsp...
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
▶️-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @fastfreefixes
📖-Like us on Facebook: / scottthefixitguy
🐥-Follow us on Twitter: / scottthefixitgy
🌎-Instagram: / scottthefixitguy
👀-See our CZcams Channel: / bestdiyappliancerepair...
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com/cgi-bin/webscr...
🔌-Good Multi-Tester: amzn.to/3Mvw1ML
🪛-Good Multi-Bit Driver Tools: amzn.to/3tC5FA4
⚙️-Good Place to Buy Parts: bit.ly/3wD4L5W
🧰-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
- You Can Fix Your Own Appliance and Save $$
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ****
FastFreeFixes
~-~~-~~~-~~-~
Please watch: "How to Easily Fix Samsung & LG Touchpad Problems"
• How to Easily Fix Sams...
~-~~-~~~-~~-~ Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu - Jak na to + styl
I just want to thank you very much that was very helpful
You’re very welcome ❤️👍😊
Of all d video I watched, you’re the one that has a good analysis on d problem.
I just open d top n pull up d door lock n viola, it worked!
It’s good I haven’t order any parts that other had suggested. I can’t thank you enough!!Good job!!!!
Thanks so much😊👍
This helped me solve the same problem tonight. I was already aware of the door unlock knob, but that didn’t work and I began to think I’d need to call a tech. Then I found your video. I think it was the drain trap, because there was a lot of crud in there and a nickel too. To be safe I also pulled and replugged all the sensors and valves I could. Still had the problem, but then I tried something one of your commenters suggested, hitting three buttons sequentially three times. That worked. It made all the panel lights illuminate. Once I touched every button and rotated the dial it completely reset and now it works good as new again. You saved me minimum of a repair call, and more likely a new washer dryer set. Thank you for taking the time to post this and for your video being so helpful.
Awesome job Brian😊
A million thanks, Scott, for this very informative video! Easy to understand, it completely solved my problem with my Whirlpool washer. Excellent troubleshooting video! Keep posting!
Thanks so much Rich😊😊😊
Nicely Done😊
Great video !! Have a Whirlpool WFW92HEFC00 with exact same error codes. Removed top cover that enabled me to have access to manually open the (locked) door. Once the door was unlocked, plugged in washer and it finally reset itself. Ran the drain cycle with my clothes and washer functioned normally. Thank you Scott...nice job!!
Great job 😊👍
Thank you so much! You solved my problem…
You’re welcome 😊
Love it will try in tbe morning same problem you have
Thanks John,
Did it work?
Dude, I have the exact same symptom, I’m going to try to do this, if it fixes it, I’ll be eternally grateful to you. I thought it was the computer or touch panel
Thanks Karl,
Did it work?
We had the same problem of the drain pump running continuously even when the machine was 'off'. I ran the diagnostic test (hitting 3 buttons in succession 3 times: 123, 123, 123) which gave a meaningless error code. When I got out of the diagnostic mode (by hitting the first of the three buttons), the pump stopped and the machine behaved normally. That was a nice easy fix!😀😀😀
Nicely done 👍
Thank you Scott. I followed your steps and got the same results - issue resolved. The coin trap was not clogged up, so that didn't resolve the problem. I reset the air pressure switch and reset the door lock and the washer returned to normal operation. Thanks for taking the time to demonstrate these steps.
Nicely done 👍😊
Hi Scott! I just got this washer (used) and it's not washing. I'm thinking of trying to reset it first to see if that's it before I go taking things apart. It has been in storage a long time. And it's working on the rinse/drain and spin cycle. 🤷🏼♀️
Just not agitating?
I follow the step by step you did, but your worked after the door lock was unlocked and opened. Mine is still under same problem
What’s your washer doing?
Hi 😊 👋,
My washing machine (Beko) is filling up , not turning and draining by itself after a few minutes. Any ideas? I've checked the bottom filter, its not blocked.
So it fills up and then after awhile it drains, but no motor activity?
Help the 🗝️ light won't turn off. I tried turning breaker off 1 min and unplugging the washer. I also tried holding the button 3 secs .. nothing is wrkin.
Try holding in the Start/Pause button for 5 seconds to see if that turns it off.
Did you replace the door lock? Did it fix the issue?
Hi Po,I have a problem with my front load whirlpool washing..
the 9 minutes timer stuck and followed with E920 error code ,may I know what is the meaning of this ?
I think that problem has to do with the motor control board not working properly.
It’s unable to get up to full speed spin so the timer gets stuck at 9:00 minutes.
Have you ever had the issue of the washer will go through the wash cycle but will not rinse all the water and soap out so by the end of the cycle you're still left with wet clothes?
Hi Kelly,
Do you think it’s spinning fast at the end?
That's the problem I'm having!
That's the problem I'm having
Help please
Are you sure that fixed the water, my husband put a new drain plug in and ours still wouldn’t drain
Whirlpool duet washer, new drain pump, now throws F9 E1. But i can unplug it 3-4 times and it will finally finish.
Actually ran it with nothing in it. Worked perfectly. Any ideas?
Yep,
You have a partially clogged drain coin trap.
Just need to remove the lower panel below the washer door and unscrew the drain plastic coin trap and empty it of all the junk that clogging it.
the 9 minuted time will stuck,its draining then keep on spinning then the time dont move...whats the problem behind this?
I’d say a clogged cold water fill vale filter or it might need a new motor controller.
So did you replace the door lock? Did it fix the issue?
Thanks Brock,
I removed the top and pulled up on the plastic tab on the lock. It was caused by too much detergent causing too many suds.
Maybe a mirror to look in the cylinder void
Good idea😊
My washer stops at 17 after i set at 32mins possible cause pls
Is it able to drain the water?
I'm having the same issue but my water is not draining. And it won't power on once this happens
Can I ask you your washer model number please 🙏 mine is same like yours and it’s model number is erased. Please plz help me it leaves clothes a lot watery
Do you think it’s not spinning fast enough or not fully draining?
Where is the water adjuster?
Can you send that question to my email at: scottthefixitguy@yahoo.com
@@FastFreeFixes just sent it
cleaned coin trap but that wasnt the problem, still not spinning and leaving soggy clothes
Thanks Larry,
I wonder if it needs a new door lock?
F31,F32 and F2