навивать оребрение на ржавую трубу, это почти тоже самое что ленту повесить рядом, теплоотдача будет минимальна. для качественного оребрения трубы дожны быть минимум оцинкованы, а лучше лужёные.
Спираль должна быть приварена. А тип покрытия не важен. Котлы-утилизаторы по 200т точно так и выглядят. Только спираль к 30 метровым трубам ТВЧ приварена .. а к оцинковке ни чего не приваришь
I am highly impressed of making by them the Finned Tubes, may be they would be able to work on more thicker, wider and varying pitch of Fins on the Tube, they are not using U Bends for Connecting Heating Tube Elements but are Joining them with End Box Type Closers, by which they can not get more higher temperature of the Fluid inside the Tube (Water, Oil or any Gas) Hydro Testing has proved their Working is solid, may they are following any Design and / OR Manufacturing International Standards, Like ASME, BS OR DIN, They can easily put on to Standards if they are not. Thanks for this very useful Video.
Does anyone know the location of this factory ? I want to pay them a visit for a personal project. If you know the address or have any contact information please ahare.
Can't believe every weld
Gas-tight with stick welding.
Very skilled craftsmanship.
And under those working conditions. Impressive.
Thanks for your valuable feedback
I understand that labor is cheap here but there is a lot of wasted motion in these operations.
Sorry but I don't understand what are the final products and what are for. Maybe are handcrafted radiators for trucks???
Wow Ver nice Video big like God bless you Good night
навивать оребрение на ржавую трубу, это почти тоже самое что ленту повесить рядом, теплоотдача будет минимальна. для качественного оребрения трубы дожны быть минимум оцинкованы, а лучше лужёные.
I assumed they were going to lead solider them .. heat transfer will be very poor.
Спираль должна быть приварена. А тип покрытия не важен. Котлы-утилизаторы по 200т точно так и выглядят. Только спираль к 30 метровым трубам ТВЧ приварена .. а к оцинковке ни чего не приваришь
I am highly impressed of making by them the Finned Tubes, may be they would be able to work on more thicker, wider and varying pitch of Fins on the Tube, they are not using U Bends for Connecting Heating Tube Elements but are Joining them with End Box Type Closers, by which they can not get more higher temperature of the Fluid inside the Tube (Water, Oil or any Gas) Hydro Testing has proved their Working is solid, may they are following any Design and / OR Manufacturing International Standards, Like ASME, BS OR DIN, They can easily put on to Standards if they are not. Thanks for this very useful Video.
Working on tables would be more efficient.
Как говорится на века сделали как совсем...а не современный силумин и пластик
Thanks for your valuable feedback
Excellent work
Genius! Great video thank you.
Thanks for your valuable feedback
Awesome 👍🏻❤️
I never see people using cutting oil in these videos. I feel the drill bit's pain.
Thanks for your valuable feedback
Sometimes they use water and that helps cool the bit but cutting oil actually helps the bit cut.
Tengo duda. Hasta qué edad dejan de ver los soldadores? Es impresionante la falta de cuidado que tienen con su salud! 😵😵
Thanks for your valuable feedback
จะถ่ายตอนเชื่อมเหล็กเพื่ออะไร มันเข้าตา ถ่ายหลบไปที่อื่นก็ได้ เห็นทุกคลิปชอบถ่ายกันจังเลยตอนเชื่อมเหล็ก
Thanks for your valuable feedback
Опасный радиатор
Lovely people x
Maşallah.
👍🏻💐
I am dissapointed becauae they do not have safety sandals.
Where is this factory located ???
Somewhere in southern California 😂😂
Tatooine, I guess 👀
Why they work on the floor all the time? They have not invented the tables yet?
Tables are very expressive in this place
I think they are just used to it.
Thanks for your valuable feedback
Good work
Please share location or contact No of this factory, this is the least you can do after filming them
😢😢😢😢 mamma mia
Super dangereux toutes ces étapes de fabrications
Thanks for your valuable comment
unfinished work
Plz anyone can proved contect number of this shop maker ..
Isn't bad for their legs to sit down like that for long periods of time??? 👀
Does anyone know the location of this factory ? I want to pay them a visit for a personal project. If you know the address or have any contact information please ahare.