I don't race anything now but only raced Legends previously. Prices range from $5k to $20k with new ones from the factory at ~$15k. There really isn't a "better" one as they all come out of the same chassis shop, but some like coupes or sedans more. You can check out www.uslegendcars.com/ for more info or even better check out Just Legends facebook or some of the other Legends Car facebook groups for more info.
They still raced in the South on a touring series. www.allisonlegacy.com/ If they caught on I would so own one. I like the chassis and suspension options better on the Legacy cars.
Yes they got to greedy and thought everyone should pay top dollar for their car. Had they been better at marketing their product they could have been bigger than the Legends cars. At one point they had 10 series running across the country. Now they have one which is their own which barely fields 10 cars. I feel it is a far better car than the Legend car it was just run by people who didn't know how to properly market their product.
@@RayRusawcocktailminer the current engine options for the series (all Yamaha) 1200cc, 1250cc and 847cc injected all make more power than most Harley engines.
Question, what happened to the 37' Coupes? Were they de-registered? I am not seeing them in the 2022 videos. I really like the 37' coupes, because they were the ones that used to compete in the Argentinian Turismo Carretera (TC), until more modern models started to appear like the Ika Renault Torino, the Chevytu, and the Ford Falcon to mention some modern compacts of that time ... . Greetings from Argentina
@@Bigmilmotorsports Thanks for the reply, what a shame, with how fantastic the other cars look, I wanted to see more of the '37 Chevrolet/Ford Coupes.
Considering all the nice jigs (about 4:00) they have it's really hard to understand how they manage to screw up the end result. Some of the brand new frames are twisted when they arrive (without any hits) Friend of mine got one where the other side of the front clip was one inch up when it was leveled on a table (whole frame was twisting, not just the front clip, but they fixed just the clip to correct the suspension points). Maybe something really wrong with the welding sequences?
It's the welding sequence and they just don't have good quality control. A lot of people I know buy frames from them without front clips and then have another shop stress relieve the chassis before putting on the clip. When your the only manufacturer of a product you don't have a lot of incentive to provide the best quality product.
It really depends on what your doing. First from everything I've heard the Bubble coupe is worst. For Asphalt it may depend on driving style but I liked driving the Coupes (34Ford in my case) better than the sedan. For dirt I don't know, I see a lot more sedans on dirt than on Asphalt. I don't believe there is a ton difference between the two (although there are some weight savings and roll center gains) it's really what do you like. The biggest difference is re-sale, coupes (other than the bubble) have higher re-sale because everybody thinks the weight and roll center savings are worth it.
Coupes are slightly lighter and have a lower roll center therefore they may be more nimble than coupes. I don;t know why you would see more sedans on roadcourses, unless your talking in Europe. There are more sedans in Europe for a whole different reason.
US Legend Cars prefers to sell through dealers Here are several places I use. www.cmgmotorsports.com - My Fav www.vmsmotorsports.com www.rpmproformance.com www.rpmracingca.com - West coats based plus they have a lot hard to find parts
David Turnbole I don’t know.....I know of only one track that runs them....or did. I would expect they won’t be selling them anymore after a bit.........
@@Bigmilmotorsports I do the same sometimes. Heat exchangers, tube sheets, some tanks, coal and gas fired boilers. Nice video btw. I had a barracuda buggy with the busa motor on it.
I highly doubt this guy is from the south that’s carrying the camera. He makes a comment saying “ there the customer if that’s what they want” but in a rude way. The guy that’s giving the tour. He’s from the south how he answered that question wasn’t rude or condescending in anyway. That way of answering translation to Yankees. He was saying “whatever floats there boat” then this guy responds with there the customer if that’s what they want as if he’s offended for them. It’s interesting how people don’t understand the non verbal tone. When he said idkahhh. That’s just saying in the south whatever floats your boat. And the guy interviewing sounded like he took offense to it. The guying giving the tour is quiet cause he is t understanding what pissed the guy off. This is part of today’s problem people just don’t understand tone growls. Humpywheeler would always educate Yankees on how to interpret a southern person because they would get it wrong all the time
Wow, you read waaay too much into that..... I'm not sure if Iowa makes me a Yankee or not? But what you interpreted as rude was interpreted by the tour guide as "yep, we don't know why they want it but if that's what they want than we will make it for them"! Which is exactly how I meant it....... You failed to understand the context around which it was spoken. But hey, thanks for the random not so nice comment!
Very cool, thank you.
Thanks. Very interesting tour.
Sweet nice tour.
This is really cool about the shop and everything.
Bellissime, le adoro.
really cool video thanks
Dj Nance thank you!
someday if I ever get rich and famous I would love to own a coupe that would be street legal to to go to work in
I’ve seen a couple of street legal ones! Not exactly good for getting groceries though....hahaha
Nice
Where are the bodies made? Are they made of fiberglass or steel?
Legends are fiberglass. Dwarfs are sheet metal.
Yes, fiberglass
@bigmills What kind of a car do u race with I didn’t even know about legend cars til now and idk hw much it is or what’s the best car to race with
I don't race anything now but only raced Legends previously. Prices range from $5k to $20k with new ones from the factory at ~$15k. There really isn't a "better" one as they all come out of the same chassis shop, but some like coupes or sedans more. You can check out www.uslegendcars.com/ for more info or even better check out Just Legends facebook or some of the other Legends Car facebook groups for more info.
and my favorite type of legend is the Ford coupe I don't know why but I like the design of them
It's ok, I won't hold it against you.....My favorite is the 37' Chevy Sedan.....:)
ya it is a good kind of car
BigmilMotorsports I have a 37 Chevy sedan
What is the name of that blue & green one and that car with Target 🎯 logo on it. Also what’s the investment on that particular car ?
That was a Bandolero, I don't know how much they are. It's for younger kids
Does anyone know what ever happened to the Allison legacy series?
They still raced in the South on a touring series. www.allisonlegacy.com/
If they caught on I would so own one. I like the chassis and suspension options better on the Legacy cars.
Yes they got to greedy and thought everyone should pay top dollar for their car. Had they been better at marketing their product they could have been bigger than the Legends cars. At one point they had 10 series running across the country. Now they have one which is their own which barely fields 10 cars. I feel it is a far better car than the Legend car it was just run by people who didn't know how to properly market their product.
has anyone ever mounted a harley for a power plant ?
Not that I’m aware of, but it would sure sound cool!
@@Bigmilmotorsports the VRod engine would really make it scoot
@@RayRusawcocktailminer the current engine options for the series (all Yamaha) 1200cc, 1250cc and 847cc injected all make more power than most Harley engines.
Question, what happened to the 37' Coupes? Were they de-registered? I am not seeing them in the 2022 videos.
I really like the 37' coupes, because they were the ones that used to compete in the Argentinian Turismo Carretera (TC), until more modern models started to appear like the Ika Renault Torino, the Chevytu, and the Ford Falcon to mention some modern compacts of that time ... .
Greetings from Argentina
They were not very popular in the US. I don't think they are made anymore.
@@Bigmilmotorsports Thanks for the reply, what a shame, with how fantastic the other cars look, I wanted to see more of the '37 Chevrolet/Ford Coupes.
@@Bigmilmotorsportshow do you guys make the bumpers?
@@steezyboiiii808 we didn’t make the bumpers, we made bumper tabs and rebuilt old used bumpers.
Considering all the nice jigs (about 4:00) they have it's really hard to understand how they manage to screw up the end result.
Some of the brand new frames are twisted when they arrive (without any hits) Friend of mine got one where the other side of the front clip was one inch up when it was leveled on a table (whole frame was twisting, not just the front clip, but they fixed just the clip to correct the suspension points).
Maybe something really wrong with the welding sequences?
It's the welding sequence and they just don't have good quality control. A lot of people I know buy frames from them without front clips and then have another shop stress relieve the chassis before putting on the clip.
When your the only manufacturer of a product you don't have a lot of incentive to provide the best quality product.
what body style in your opinion do you think is the best?
It really depends on what your doing. First from everything I've heard the Bubble coupe is worst. For Asphalt it may depend on driving style but I liked driving the Coupes (34Ford in my case) better than the sedan. For dirt I don't know, I see a lot more sedans on dirt than on Asphalt. I don't believe there is a ton difference between the two (although there are some weight savings and roll center gains) it's really what do you like. The biggest difference is re-sale, coupes (other than the bubble) have higher re-sale because everybody thinks the weight and roll center savings are worth it.
why think you, I was leaning towards the coupe but I saw a lot of sedans in road course videos so I was just wondering!!
Coupes are slightly lighter and have a lower roll center therefore they may be more nimble than coupes. I don;t know why you would see more sedans on roadcourses, unless your talking in Europe. There are more sedans in Europe for a whole different reason.
Our new engine is probably in one of those boxes 😂
There certainly were a lot of them there!
Whats a typical dealer price for one of these brand new?
New right around $14k depending on options
Can I buy one already put together
Yes
Where can I buy and get it shipped to me?
US Legend Cars prefers to sell through dealers
Here are several places I use.
www.cmgmotorsports.com - My Fav
www.vmsmotorsports.com
www.rpmproformance.com
www.rpmracingca.com - West coats based plus they have a lot hard to find parts
How much for those Evernham style modifieds?
David Turnbole I don’t know.....I know of only one track that runs them....or did. I would expect they won’t be selling them anymore after a bit.........
is it possible to rent in florida ?
Probably. If you checj with little gator motorsports they would know www.littlegatormotorsports.com/
Where is this. What’s the address. I want to buy one
5245 NC-49, Harrisburg, NC 28075
are u going to run sports drome next year
Probably not
Tanky! You a boilermaker?
No, I work for a Pressure Vessel manufacture
@@Bigmilmotorsports I do the same sometimes. Heat exchangers, tube sheets, some tanks, coal and gas fired boilers. Nice video btw. I had a barracuda buggy with the busa motor on it.
when are you going to race again
I just raced this past Saturday and I'm working on the video now!
are you racing at Lake erie speedway this weekend
No, I don't have the car finished yet.
looking for sponsor
Where is Queen Jolene when you need her to hold the camera ?
Smith 😂❤iwonthatlegin
❤ is a little bit more than a ❤ but I think it’s a good idea 😢🎉😮😊
Your filming skills need help
Yes they do...... I am bad at filming for one and this was an impromptu visit where I decided to film at the last minute.
Make them street legal an I'm in
Terrible camera
Yep, 5 years ago iphone......
I highly doubt this guy is from the south that’s carrying the camera. He makes a comment saying “ there the customer if that’s what they want” but in a rude way. The guy that’s giving the tour. He’s from the south how he answered that question wasn’t rude or condescending in anyway. That way of answering translation to Yankees. He was saying “whatever floats there boat” then this guy responds with there the customer if that’s what they want as if he’s offended for them. It’s interesting how people don’t understand the non verbal tone. When he said idkahhh. That’s just saying in the south whatever floats your boat. And the guy interviewing sounded like he took offense to it. The guying giving the tour is quiet cause he is t understanding what pissed the guy off. This is part of today’s problem people just don’t understand tone growls. Humpywheeler would always educate Yankees on how to interpret a southern person because they would get it wrong all the time
Wow, you read waaay too much into that..... I'm not sure if Iowa makes me a Yankee or not? But what you interpreted as rude was interpreted by the tour guide as "yep, we don't know why they want it but if that's what they want than we will make it for them"! Which is exactly how I meant it....... You failed to understand the context around which it was spoken. But hey, thanks for the random not so nice comment!