Finally after watching a lot of garbage videos about this topic, this one is informative. Only a small request. Instead of connecting all the speakers, can you connect one channel at a time, because it is not yet clear if those dolby decoder boards actually decodes 5.1 or they just does prologic. Thank you
I have one of this optical to RCA audio decoder. I tested in optical mode and it was capable to decoder the audio from TV output in Dolby mode. It was clear that worked just fine cuz I tested in a movie from Netflix.
I also have an old 5.1 speaker set, but the only 5.1 input with only 5.1 amplier or other any device like dvd. but now a days everything is in Bluetooth has only 2.1 channel. I want to use these speaker set. Suggest me solution
Good information bhai mere pass car stereo hai jo Maine assemble karvaya hai jisme alag se 4558 ic bass tribal borad lagvaya hai stereo 12 v DC se operate ho ta hai jiski out put bohot hi best hai alag se bass sound button hai jo music ko kam ya Jayda or voice on off kar sakte hai total kharcha 1500 me ho gaya
did you checked that, ch is separation is working correctly or not? usually this type Chinese Brd can not separate the ch properly... pls confirm me then i will buy it. If you can pls give another testing ch separator video... Thanks in advance
Does it filter outputs , like sending bass only to SW , and filtering bass from Front channels or it sends Full Bandwidth sound to all channels except SW ?
if i play 5.1 channel movie from this, will it provide surround sound, means har speaker se alag awaz ayegi.. like speech ki front se and baki background music rear left/right se?. i m planning to buy this.
I have an old 5.1 amplifier, but the only 5.1 input that you can give it is through coaxial cable. I would like to give it 5.1 channel input through bluetooth, optical or hdmi. Suggest a solution
Thank sir pls yeh Bata dein ager supply sub ko aik hee aiy I mean car tape jesi supply aur dts board ko buk converter say 5volt dein to in board ko line kee ground sub ko Deni ho gee ya supply kee ground kafi hay
Hi sorry I have 5.1Ch amp card like the video one everything works ok, now I need to make it work with 4 channels (not 5.1ch) I thought I read somewhere that not connecting a source to the input and a load to the output would get damaged but is this true ???
@@inkocean158 sir good class d amplifier new borad but.sir mere pas 4440 amplifier car stereo heiy sath me 4558 vala baas tribal borad lagya heiy sir aap mane ya mane sir eska out put best heiy .12 v ka adaptor ka supply diya heiy.or 10 inch ka dual speaker lagya heiy or ye home use sir mera kahene ka matalab heiy ki thodi jankari ho to sir ham kam kharch me best amplifier bord se out put bana sakte hain
Is audio ke amplifier board me agar start se hi full volume ki audio supply deta hu to ye mote jaise ho jata hai hai, restart karte hain tab fir se audio aa paati hai. Kya ye iska built-in feature hai ya koi fault
Its very costly at your website, i bought dac at 1200 with shipping from banggood and same with amplifier, it got it at 2400 with shipping from banggood.
It's not demanding, it's demanded. Demanding means that you have to put put a lot of effort . Good video
Thanks for the correction.
It's not put put, one 'put' is sufficient.
Finally after watching a lot of garbage videos about this topic, this one is informative. Only a small request. Instead of connecting all the speakers, can you connect one channel at a time, because it is not yet clear if those dolby decoder boards actually decodes 5.1 or they just does prologic. Thank you
I have one of this optical to RCA audio decoder. I tested in optical mode and it was capable to decoder the audio from TV output in Dolby mode. It was clear that worked just fine cuz I tested in a movie from Netflix.
@@fseeletronicos thanks for the useful info
Next level vidio ....utube me he hi nahi itna easy esmble kar sakte he
Thank you
Sir bahut mast h
Next time
Pura ghar k hisab se fiting kr k dikhaiye sir
Waiting for you next video 5.1 using old 2.1 system
Video jarur banana i subscribed just for that 👍
Let's see performance kaisi rahegi
Ya even I want to know how to connect 2.1 amplifier with this decoder
Aap k agle video ka intezar rhega
Wow very simple...superb video....very descriptive.......
Thanks
Nice video, waiting for next one also.
Thank you
I also have an old 5.1 speaker set, but the only 5.1 input with only 5.1 amplier or other any device like dvd. but now a days everything is in Bluetooth has only 2.1 channel. I want to use these speaker set. Suggest me solution
sir that DAC really decodes DD and DTS or Pro Logic ?? can you able to provide some proofs
Bahut mehnat Se video banai hai
How to add volume knob controls for volume, treble, bass etc
Informative video
I bought this 5.1 Dolby digital audio rush from faridabad just 1500Rs offline
Thanks for such valuable information ❤️🔥..
My pleasure.
Good information bhai mere pass car stereo hai jo Maine assemble karvaya hai jisme alag se 4558 ic bass tribal borad lagvaya hai stereo 12 v DC se operate ho ta hai jiski out put bohot hi best hai alag se bass sound button hai jo music ko kam ya Jayda or voice on off kar sakte hai total kharcha 1500 me ho gaya
did you checked that, ch is separation is working correctly or not? usually this type Chinese Brd can not separate the ch properly... pls confirm me then i will buy it. If you can pls give another testing ch separator video... Thanks in advance
Does it filter outputs , like sending bass only to SW , and filtering bass from Front channels or it sends Full Bandwidth sound to all channels except SW ?
if i play 5.1 channel movie from this, will it provide surround sound, means har speaker se alag awaz ayegi.. like speech ki front se and baki background music rear left/right se?. i m planning to buy this.
Yes u r audio codec must be dolby configured
op nice
Sir can you pls review the quality of the DAC , as I have read reviews that the sound output is low in some channels.
I have an old 5.1 amplifier, but the only 5.1 input that you can give it is through coaxial cable. I would like to give it 5.1 channel input through bluetooth, optical or hdmi. Suggest a solution
You need a device that takes input through optical or hdmi arc.
Thank you sir ji
50 watt per channel, center 100 watt or S/W mein 100 watt etna pura supply melta hai ?
Thank you for details
Thank you
Thank sir pls yeh Bata dein ager supply sub ko aik hee aiy I mean car tape jesi supply aur dts board ko buk converter say 5volt dein to in board ko line kee ground sub ko Deni ho gee ya supply kee ground kafi hay
aap ne eh do decoder se hi direct speaker baja hai? ya esme amplifier laga hai?
Hi sorry I have 5.1Ch amp card like the video one everything works ok, now I need to make it work with 4 channels (not 5.1ch)
I thought I read somewhere that not connecting a source to the input and a load to the output would get damaged but is this true ???
Thank you
I have Philips 5.1 speakers 30X5 and 50X1 200W total. Only there 2 boards will work for me? Kindy suggest.
Sir isme kitne inch ke satellite speaker lgane hai or subwoofer center pls sir size btaye
Nice bhai like
Thanks
@@inkocean158 sir good class d amplifier new borad but.sir mere pas 4440 amplifier car stereo heiy sath me 4558 vala baas tribal borad lagya heiy sir aap mane ya mane sir eska out put best heiy .12 v ka adaptor ka supply diya heiy.or 10 inch ka dual speaker lagya heiy or ye home use sir mera kahene ka matalab heiy ki thodi jankari ho to sir ham kam kharch me best amplifier bord se out put bana sakte hain
Thanks
Thanks sir
Sir asal mein main dts board kharab ker Chuka hon aur tpa3116 stereo board istamal kerty huy
Original Dolby digital ic pe hologram marking diya rehta hai.
CAN I CONECT WITH VU 55UH7545 TV I HAVE A F&D F5060 5.1 HOME THEATRE I WANT TO CONNECT TV WITH HOME THEATRE
Sir India me Milne Wale or usa me Milne Wale audio player ke sounds me itna difference kyun hota he
Sir 24v supply jo audio board ko deni hai ketna ampere ka supply deni hai 1Amp ?? 2 Amp?
sir ager hum ne bass treble board ad karna ho to kesy kary
Giving a signal through the Stereo in by 3.5 mm jack
what is output??
2.0 .../2.1 .../3.1 ...???
2.0 = R and L channel only.
2.1 = R and L plus one subwoofer.
5.1 = R front L front
R rear L rear,
Plus one subwoofer.
should I add free amplifier with recorder or with amplifier?
sir is amplifier me tpa3116 original ic hain ya 16 pin ic
Katna amp transformer use karna hoga
5.1ch HDMI audio extractor please sir..
Hello can we upgrade a 2.1 channel system to 5.1 channel system? Or enhance 2.1 channel system output
Nice, DAC in available with ARC Input ???
Sorry, not at present.
@@inkocean158 ok in future???
I want to put a pre amplifier with the decoder. What to do in that case?
Sir aap damage board Amazon main q veg te hen...or return v acept nhi karte hn
Isme pri amp connection kaise kare
Sir mere pass 5.1 harman kardon hkts 210 sub/230 hai toh mujhe voh via is device se TV me lagana hai using Optical cable toh kya me kar sakta hu?
Is audio ke amplifier board me agar start se hi full volume ki audio supply deta hu to ye mote jaise ho jata hai hai, restart karte hain tab fir se audio aa paati hai. Kya ye iska built-in feature hai ya koi fault
Not sure about it
सर मेरे पास भी ऐसा ही बॉक्स है सर वह चलता है थोड़ी देर बाद उसमें अटक अटक कर आवाज आती है कैसे रिपेयर करें
bhai batao na.....2.1 amplifier leke 5.1 system kaise banaye.......merepas DAC hai...
Videocon d2h set top box ka Dolby audio decode ho sakta h? Into speaker??
Not sure.
Are the 5 channels filtered too or is it full range?
Sir speaker pr bhi video banaiye
What will be the price?
It is singlechip or double chip ic
1 board chahatta hai
3116d2 pe kaise dac use kare plz batayenge....
I wish there was a translation
Sirf 1 use karne se nahi hoga?
Sir ye decoder 2.1 ma hoga
सर मेरे पास भी बॉक्स है पर उसमें आवाज थोड़ी देर बाद अटक अटक कर आती है रिपेयर कहां होता है आप बताओ
सर जवाब तो दो
5.1 or total kitne cost aygi
App dolby ko royalty dete ho kya
Any one please suggest 5.1 preamplifier or remote kit for this amp
Dolby sound ka sirket ka bare me batey
nice video boare price?
Why would someone do that
मेरे पास होम थीटर में normal port Tata sky mein HDMI port मैं दोनों को कैसे कनेक्ट कर सकता हूं
By HDMI to AUX converter
atmos ka board milta he lya
Volume cantrol nahi hai is board main sir
700 watt class d with power supply amplifier ka link de do Lena hai
Sir TPA3255 of 600w is there, link is not available
Power supply used in this project?
Yhe video jo ap Daly hai is ka price kitna hai mujhy hona hai
Its very costly at your website, i bought dac at 1200 with shipping from banggood and same with amplifier, it got it at 2400 with shipping from banggood.
That is a Chinese website, that evades taxes, there is 30% customs duty and 18% GST
Nice Information and video..
Sir.. Aapka email id chahiye.. Thodi information chahiye..
Tata sky HD movie logawo dost 5.1home theater le sath 5.1 ....
price????
12 volt Se chalega
Sir sound decoder cho humming aundi aa ohda ki hall aa sir
Ye board kahan milega kitne ka
Amplifier ki prise kya hogi
Sir AAP ki shop Kahan h
or 5v ki suppy mein ketna Amp ? ki supply deni hai ?
One
Where can I get these complete, ready to use in the U.S.?
Aliexpress
Hai Hollywood movi me 5.1recarding songs me me kaha
please find only DAC Decoder board price
I need DAC For stereo purposes,
How much cost please sir
Sir wo system bnayei ye . sir dono board ka price kitna hei
Rs.3500+1800
Price? Bro
Bro 5.1 class d power amplifier board price
Rs.3500
Is it Dolby digital prologic ii ?
Yes
Sir kya ap ye mare liya bna skte h
How much cost
Sir please suggest me amplifier for
285w rms 1100w peak
4ohm ya 8ohm
Bhaiya apka pass 5.1 remote kit mila gi,???
Sorry, unavailable right now