400 Watts Surround Sound Class D #5.1Amplifier. Review and Test. घर में थिएटर का पूरा मज़ा
Vložit
- čas přidán 16. 09. 2022
- 400 Watts Surround Sound Class D #5.1Amplifier. Review and Test. घर में थिएटर का पूरा मज़ा @inkocean158
Review and Test of 5.1 Class D amplifier. Buy it from here:यहाँ से क्लिक करके ख़रीदे
inkocean.in/products/power-am...
inkocean.in/products/ne5532-j...
inkocean.in/products/analog-5...
inkocean.in/products/xy-s350h...
inkocean.in/products/ink-1002...
inkocean.in/products/inkocean...
amzn.to/34mUmj8
amzn.to/3wBvFeL
amzn.to/3bYU4TL
amzn.to/3hSV6EF
This can be assembled with medium power 5.1 power amplifier, suitable for home audio-visual environment, car speaker modification, high power, good sound quality, small size, high efficiency and high power saving. Continuous improvement through long-term verification, stable and reliable quality, can be safely applied.
Feature:
1, Independent 6 input, 6 output, pure final amplifier
2, Input high sensitivity, you can directly connect to computer sound card, decoder, DVD, HD player, you can also upgrade most AV amplifiers, can be used with the power supply of the front panel, no noise, easy to use
3, This amplifier with 4 IC as the core (better than TPA3116), ruby electrolysis for coupling, large filter capacitor in parallel
4, All use pure copper, large hole terminal, convenient wiring, safe and reliable connection
Audio input:
Input high impedance, high sensitivity 100mv, adapt to computer sound card, decoder, DVD, car navigation and other 5.1 low voltage audio signal input
Output power:
Maximum 50W*4 (main box and surround), maximum 100W*2 (center and bass), please note that the input and output power with high voltage should not exceed the maximum value. +24V input temperature rise is relatively high, pay attention to ventilation and heat dissipation
Power supply : DC12-24V (can not be directly connected to AC)
Size (L*W*H): 100*80*30MM
Wiring instructions:
1. Before accessing the preamp, please do not plug or unplug the signal input cable when there is power to avoid damage to the chip.
2. Audio signal input socket white PH2.54/7P (6 + signal end, one signal ground).
3. Power input power positive +24V and power negative GND, can not reverse
4. Speaker terminal (6 channels are positive and negative, pay attention to the positive and negative of the speaker line, the positive and negative speaker lines can not be crossed in parallel)
Reduce background noise:
1. The front plate of the potentiometer or the copper wire of the power amplifier board is connected to the metal casing of all the potentiometers and welded to the ground of the front plate.
2. Connect the power cord of the power amplifier to the bottom box of the chassis when installing the chassis.
3. Audio signal input line must use audio dedicated three-core shielded cable - Věda a technologie
Thank you 💕 Sir.....Aap bahut badhiya explain karte hein....apka audio se related experience kamal ka hein
Sir aap ka video muje bahut pasand hai.kyo ki aap kafi detail me samjhate hai .
Ink- ocean powered by what I think. Great knowledge power combination 💕💕💕👍👍👍👍👍👍👍👍👍
Sat Sri Akaal Sir Bahut Badiya Aur Quality ke Board ki Jankari Dete hai Aap Thanks
Nice jankari Diya hai mujhe.... sir ji ❤❤❤ thank you
Very Good advertising for INKOCEAN.
Apka channel bahut achchha hai.
Amazing. You are brilliant.
I had harman kardon avr pretty old, It has some issues. How can I connect the 5JBL speakers as the connection is with cables and not pins or open connectors, do I need to buy connectors. And for subwoofer it is huge, It was on lfe, so can I connect lfe cable to the subwoofer port.
Nice video sir 👍
Really need a Dolby Atmos 7.1.2 or 7.2.4 channel decoder board which works over HDMI ARC , the world has evolved but we are still living 15 years ago , even 7.1 channel amplifiers are so rare to get :(
exactly. so sad 😞
Not possible to decode atmos on such ordinary DIY boards. First because dolby atmos is a proprietary technology and second because buying the license to employ in such boards will be a costly affairs for any company producing these types of boards. Only Dolby and dts lossy 5.1 formats(not even dolby true hd or dts hdma lossless) is available on these boards because the technology is old and free.
Correct
Duniya ki sachchai adhi se jyada uplabdhi adhi abadi tak nahi pahuch sakti
5.1 aur 7.1/.2 aam hoga tb tk koi nayi cheez ajaayegi haha
Maine 20 saal audio me research kiye aur
Bcz of limited options and resources usko apply nahi kar sakta
Mila bhai ko 5.1 channel System jo really m work karta ho
Thanks.
I am using 3 board of inkocean. Exllent sound quality. We have to do little change in power supply. Power supply should be 22 volt. Extra 2 capacitor 4700/50 volt We have to add and in between capacitor fix indcuter coil. It will become dc filter circuit. No noise. Silent and clear sound will come because power supply will be fully filter. Those who want use class D amplifier please use dc to dc filter circuit.
Thanks sir.
I am watching your all videos Very carefully.
Sir I want to built 5.1 amp please share how you have did that complete assembly thanks
Is Dc filter required in Smps also?
gr8 knowledge 🎉
Sara dout clear ho gaya sir,, thank you 🥰
thanks sir ji for giving loots of knowledge 😍 about home theater system 🙏. i have an old LG home theater system 5.1. amplifier 📢 is DVD 📀. now DVD is totally out of market & it's not working properly something went wrong. can you just suggest me which company should I buy a amplifier 📢 for my hometheatre system 5.1. (my budget is only 10000.oo only. can you give a showroom address near by bombay. ❤️
Very very nice board!!
सर आपकी सारी विडियोज को बार बार देखता हुं एक बार देखने के बाद कुछ दिन बाद फिर देखता हुं best of luck sir 👍👍
🌷⚘Thank you sir 🌺🌹
THANK GOOD INFO BRO
Sir nice explanation..! is there any remote control circuit where can i can manage source input and volume control ?
Very nice bords,next video demo plz..
Very good
Which company speaker is best for this with 8 inch for subwoofer and 50 watt for 6 inch speaker
Is there any other components should be use or not necessary?
Wow I need that
Sir main aap ke sare videos dekhta hun or aap ka samghane ka tarika bhi bohot Acha hai plz sir aap 1 bar TTA5200 TTC1943 Ka amplifier circuit board 100w and 200w ka bana kar video banay or Sir aap garbar file bhi upload kare Taki hum bhi is ka use kar sake
100 watt ke board ka video hai.
Sir tda7498e xy s220h board me kitna ampere dena hoga full power ke liye
Sir is board me inductor coil filter ke liye nhi h to kya audio quality me kuch impact nhi padega???🤔🤔🤔
Sir good which speaker is best for this
Sir bass treble with mic board ka preamp ka review laiyena please ya mic board alag & bass treble mid board alag ho same price jo budget me achha performance de please reply sir.
Amar jebronics juk bar 9400 model 5.1 sound bar ache kon amplifier die chalano jabe. Pl. Jodi bolen.
Sir you said in the video that you have made a detailed video on 5.1 surround system. I searched in your channel but could not find it. Can you please share the link
sir zk mt21 amplifier hai usme 24 volt pr 300 watt rms jbl subwoofer chala sakte hain kya
Nice video sir 👍 ....
Sir tpa3110 & pam8610 mai kon sa board jyada accha hai sound ke mukable mai ???
3110
Sir , hamare pass koi assemble karne hawa nhi hai . Kya aap assemble kar ke de sakte hai kia?
Sir kya isko stereo 3way crossover laga kar istimaal kar sakte hain? Please sir reply karna zarur
Sir, I have order both preamp and 5.1 amplifier but there is no marking on preamp can you suggest to me how to do wiring? Please reply.
I have sharp dvd- cassette player music system (two front, two surround speaker) surround speaker is smaller than front speaker,
I want to make 5.1 surround sound using amplifier, can I use these speakers ?
Which amplifier is best for 5.1 ?
Which decode is best for 5.1 dolby atmos fire tv stick ?
is there any availability for 300 w car sub woofer with as 2.1 or 5.1 amplifier. Please let me know.
subwoofer ka placement bhi bahut mainey rakhta hei.. ha agar downfiring sub woofer ho toh aap ka kehna maan sakte hei, aur agar front firing sub woofer ho toh placement bahut mainey rakhta hei. 🙏☺️
Sir ahuja ss 160 dp (isme 2030 ic laga hai)
Is amplifier ko kaise modified kiya ja sakra hai jisse crispy home theater jaisa digital audio nikle.
Kya.
K isme class d amplifier install kiya ja sakta hai.
Ya audio input sorce me hi class d ka amplifier use kre,ya koi BT bord lagaye.
Sir ek video banaya amplifier ko tv or pc se kaisa connect karta hai mai 5200 amplifier apna tv se connect karta ho to bahut zayada boom boom type ka sound aata hai bina koi song play kiya speaker bahut up down karta hai aur same hota hai pc mai but phone mai ek dam silent rehata hai
Can I use basoon preamplifier board with this , plz rply
Good morning sir
Sir mere pass onkyo tx rs 313 modal ka amplifire hai isme kitne watts ka speaker & subwoofer chala sakte hai
My zebronics 9400 pro dolby 5.1 motherboard not working only rear speakers are producing sound. I am looking for alternate player which can give input to my 5.1 speakers and woofer. Also it should connect to my tv which give 5.1 by hdmi passthrough. Please give me suggestions. Thanks.
Mujhe ek confusion hai jaise ki
GND
SWB
CEN
SR
SL
FR
FL
Ka jo pin hai usme hamara 1-1 taar to jayega aur ek taar kaha lagana hai for example FR speaker me 2 wire hota hai jo ki 1 wire ko FR pin me lagayenge aur dusra wire ko kaha lagayenge usi tarah baki speaker ka bacha hua 1-1 wire ko kaha lagayenge pin ke alawa.
Sir, Ye amplifier banake milega kya with bluetooth and usb to bada accha hoga.
Do a review of Ink Ocean XY C50L
🙏🙏🙏🙏🙏
Sir,
Ek request hai. Aapke design kiye hue circuit ka Gerber file k saath PDF file bhi attache kijiye sir, board banane me aasaani ho jayega sir.
Sir maine yeha board liye haun but when ever i connect with transformer power supply continues noice hai but with smps mai nai aa raha hai please can you give solution
sir in teenon chijon Ko assemble karke mujhe de dijiye dipawali kya tohfa aap ki tarf se,🥰🥰🥰🥰
Can we use a active crossover with this amplifier. As it has 4 seperate amplifier ic's. 2 seperate 100w amplifier for left and right woofers. And the rest for mid range and high range. Just asking, coz I am planning to build a bookshelf speakers with separate amp for mid, high and low frequency.
Yes... Can be used
Is it possible to put 6mono channel Amp. Board for 5.1 channel surround sound if i put decoder inline
Sirji, ye audio board 0-19 volt ke transformer chalega d
I am using this board and Treble is not good. So pls suggest any improvement in pre amp board. Also voltage supply recommendation required
Adjust from the TV audio setting. There will be equaliser.
Sir stereo amplifier board mai ek channel par low pass filter ka conection ka diagram dedo please sir
Sir amplifier to banana chahate hai lekin sir market mein good looking caibnet nahi milti
Kya aap caibnet bhi aarange kar va denge sir please bataya
Sir 5.1 separate wireless hosaike hain Kia??
make video cs8673e vs tpa3116d2. Which Beter And Why?
Kya ye dolby digital support karta hai ?
Sir sweton 6 inches subwoofer ka review karo please 🙏🙏🙏🙏🙏❤️❤️❤️❤️❤️
Hello sir I am made 5.1 channel Dolby Atmos/digital theatre system , It is some costly but ok , If I need perfect audio , I need to buy AV receiver that will be perfect to hear 🔥🔥🔥. 🙏
sir smps ke jagah transforms laga sakte
Please make a video of inkocean NE5532/JRC4558 5.1 Preamplifier Tone Board . I am getting noise when connecting with IOT 651 amplifier. Please help
सर इस amplifier kit के हर चॅनेल के लिये कितने watt के स्पीकर और size चाहीये होम use के लिये
Sir ek best satelite speaker banakar dikhayiye please
Hello. Could you please assemble all the components and make a 5.1 channel amplifier for me please
Sir home ke liye ek powerful music kaise banaye sir
How to add tweeters for clear sound in Logitech Z906 system ??
Bro mere paas THX ONKYO ka amplifier tha 7.1 jo khrb ho Gaya, Repair cost bohot Jada hai, uske badle me koi aur AMP suggest kr do please..🙏
Hi sir my request yamaha 2.1 XH A355 bored ke bare me kuch batado
Sir...youtube ki harr video dekh lia..but kohivi ei tranformer winding ki details video nahi de raha hai...apppp plzz transformer winding ki calculation sikhayae.......🙏🙏🙏🙏
plzz sir.....😳
Hi. Same setup hai lekin bahut Hissing and humming aa raha hai. Mene ye setup plastic body me Kiya hua hai. Hitting or performance ma koi issu nahi hai. Lekin hissing sound continue aa rahi hai
Check earth points for star ground..also many time low quality decoder is responsible.
ye repair kaise hoga ? apne village me toh class AB ke components sahi se nahi milte .
NE5532/JRC4558 5.1 Preamplifier Tone Board Preamp Bass Frequency Volume Independent Adjustment 6 Way For 5.1 Amplifiers
Aur
5.1 Preamplifier Tone independent Channel Volume + Bass Adjustment 6 Way For 5.1 Amplifier DIY DC12-24V
Sir in dono mein kya difference hai
Sir can i connect a 5.1 hd audio rush board with it????
Sir subwoofer bord ka video banaiye
Which classD IC used?
12 volt pe kitne watt or 24 volt pe kitne watt deta he?
Sar mujhe 200 watt ka subwoofer aur 75 watt ke char speaker chalane Hain to mujhe kaun sa amplifier circuit Lena chahie please mujhe guide Kare... Aur satellite speaker normal speaker mein kya fark hota hai...
Readymade amplifier available?
Mei Apne Home theatre me Achhi Base vala Board dalana Chata hu koi Achha 5.1 ka board bataye jiski base Achhi ho
Sir old Indian local company ke stereo amplifier ki review video bonaye 😀
Mei ne banaya hai.
Brother... Ye 3no product milake ek amplifier banake dikhao na..please🙏
Sir aap pura ni dikhaye ki kitne speaker bjate hai aur kitne inch ka
Vacuum tube preamp details please sir
Mere pass sony ka 1000 watt 5.1 speaker set h mejhe uske liye ek best and sasta amp chahiye
Sir Namaste 🙏
Sir Ink ocean ka product ka delivery kitne din me hojata hai ?
Pincode ki hisab time hoga . Maine 24 september order kiya 29 September delivery dediya
Inkocean ke 4 inch speaker pe video banao please
Hello sar namste sar.. 6 mosfet 300w 2.1 ka bare me bataiye sar pls....
Sir detail step by step video banav kaise banate hai
Bhai kahase purchase karte haiiiiiiiiii
Sir please 1 amplifier banake dikhaiye 🙏
Audio rush decoder board is not decode true 5.1 sound through blueray player it is it only a prologic board when i connect it through blueray its not play any sound
Hi sir
Icf j40 radio ma bluetooth Kas connect Karen
Ye board car me use karskte hi meri gadi me 130 w , 4 oms ke speaker hi 4
sir DVD player me 5.1 channel output to hai par wo pendrive se sirf 2.1 hi output deta hai surround aur centre channel work nahi karta hai mane amplifier se connect kar ke dekha chuka hu
Dvd pheak do bro 😂😂
cntr aur subwoofer same watt ka hogya.. sub 200w ka hona chahiyein tha
Hi sir, could you please tell me what is the ohms of the speaks to be used for this amplifier board. Is it 4 ohms or 8 ohms ? i will be thankful to you.
Speakers 8 ohm woofer 4 ohms
thank you sir
Sar Maine yah board in ocean website se order karke mangvaee power Diya kuch der chalte ke bad band Ho Gaya jal gayi west money West so cheap quality
Website se replacement mil jayega