✨ WOLF STOVE KEEPS CLICKING - EASY FIX ✨
Vložit
- čas přidán 2. 12. 2018
- WOLF STOVE KEEPS CLICKING-EASY FIX
HOW TO EASILY CLEAN AND ADJUST THE BURNERS TO GET YOUR BURNERS GOING AGAIN
*** PLEASE EMAIL ME WITH ANY QUESTIONS TO : ScottTheFixItGuy@yahoo.com
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
▶️-Subscribe Here: / @quickandeasy5minuteap...
🛠-Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @quickandeasy5minuteap...
💻-Website: www.ScottTheFixItGuy.com
📖-Like us on Facebook: / scottthefixitguy
🐥 -Follow us on Twitter: / scottthefixitgy
🌎-Instagram: / scottthefixitguy
-👀See our CZcams Channel: / quickandeasy5minuteapp...
🙏-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
🔌-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY"
Need Extra Help with Your Appliance Today - Click Here:asqme.com/@scottthefixitgu
⚙️-Good Place to Buy Parts: bit.ly/3wD4L5W
🧰-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
- You Can Fix Your Appliance Yourself and Save $$
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 I’d Like To Thank All The Awesome Viewers That Have Supported This Channel By Subscribing or Joining as a Channel Member.
Thank You for Your Very Meaningful Support😊🙏 🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Quick and Easy - 5 Minute Appliance Fixes Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu - Jak na to + styl
Thank you!
You’re welcome 😊
So all 4 of my Wolf burners were clicking, but only on high. I googled it and that led me here. I did as you stated, and wire brushed everything clean, but that didn't fix anything for me. They all still clicked, and only on high. Then I remembered that you mentioned alcohol swabbing, so I used some alcohol wipes on all the surfaces that touched each other. That fixed 3 of the 4 burners. Then I recalled again you said something about electrical cleaners.. that's contact cleaner, and I had some, so I sprayed some on the ignitor of that stubborn 4th burner, and that fixed it. So, I'm writing this here just in case it helps others. I'm not saying don't bother scrubbing; that's probably needed. But if you've done the scrubbing and it still doesn't work, get some contact cleaner. Use it sparingly though, that stuff is basically gasoline and isopropyl alcohol, and burns for a while.
Great info. Thank you
Similar issue here..
They were all so randomly blustery, often blowing themselves clear around the igniter, causing it to fire again.
These wolf stoves, even the brand new ones you see on TV cooking shows all have this problem.
It seems they're particularly prone to any kind of dirt causing a flow issue.
On one, I couldn't put a pot on it. The pressure build from the pan above would cause the reigniting issue..
I replaced the igniter, only to find it continued.. I then simply vacuumed the whole part out, cleaned all the jets, and it's not perfect, but it is better.
I too wonder if it might actually benefit from some kind of super deep chemical cleaning. Maybe even ultrasonic.
Tricky design.
Thanks for this video. Saved me money and time on an appliance repair technician visit.
Thanks so much! Followed all your instructions and it’s now working great!
Thanks so much Kathleen😊😊😊
This video was excellent. It took all the intimidation factor out of it and 20 minutes later my stove worked and I felt like I should win a Nobel Prize for Appliance Repair. Thank you.
You should get the Nobel Prize for Appliance Repair😊😊😊
Thank you for explaining the design of this type of Wolf Range. I've always had this issues from day one. Delayed ignitions(very dangerous). I had spark box replaced some time ago. I have new burner in a box. I guess it wouldn't hurt to clean it all up and put in new rings. Thank you again.
That should help😊
Thanks for easy, concise, clear directions! It worked!!
You're welcome!😊👍
I watched your video - Thank you.
I have a DCS Range - Model RGS 366
I have igniters that dont stop clicking. The unit has a 6 burners, all the same. I have take the whole thing apart. cleaned everything with a wire brush and alcohol and put it all back together. Everyone one of the burners lights right up, but the unit keeps clicking. All of them click at the same time, even when i am only turning one on. They call just keep clicking? Any ideas?
thank you for your help.
Thank you so much for your detailed demonstration!! I actually made a post on FB to get a recommendation on Gas Stove top repairman. Then I watched your video...cleaned my stove top like a mad man and low and behold IT WORKED!! I also found out that it all started to a large amount of water condensation from a lid that was placed over 2 burners. Needless to say I deleted my FB post. THANK YOU!! PRO TIP: LET EVERYTHING DRY OUT LIKE YOU SAID IN THE VIDEO!!!
How difficult is it to change one of the spark igniters?
Thanks for best in helpful videos I am always full your videos.
Thanks so much😊
Thanks good video helped. My wolf burners are attached to the igniter with a screw can I safely remove that screw if a wanted to soak the burner to clean it?
Sorry to be so offtopic but does anyone know of a tool to get back into an instagram account??
I stupidly forgot my password. I would love any tricks you can give me
Great video I have a wolf range top that the front to burners won’t spark but if I go to light the back burner they all spark?
Thanks Andy,
You just need to replace the spark switch that’s behind the burner knob for the two front burners.
Wolf mode ct36g - clicks for about 30 seconds (all burners) before it finally ignites. Once one of the burners has lit, the rest light easily, but the first one always takes a very long time. They do not continue clicking once lit. Any suggestions?
Thank you for the video, I have the inner burner not working, but the external work. Do you have any suggestion why is doing that ?
Hi !!!! What do you mean by inner burner?? you mean the oven ???
Always you great!
Thanks so Much Farid😊😊😊
you may end up having to replace those igniters in a few years. To remove them you to remove that center hub with a 10 mm allen wrench and let me tell you it takes some self convincing to believe that it will come off; conventional thread right tight lefty loosy but it is on there very tight. I use nickel anti sieze on all the parts when ever I take 'em apart. after that hub comes out you gotta disconnect the gas ( 8 ,12, 14 , and 15 wrenches) then you remove the two Phillips pan head screws holding the whole burner on. This might be a good time to unscrew all those screws and put antisieze on them. I had to drill mine out they were so frozen. I re-tapped them with a 10-32 roll form tap and used Star drives and antisieze. the igniters come out through the upper side of the burner after you pull the wire and remove the circlip and spring located underneath.
Thanks so much, great detail😊
My igniter keeps clicking, even when the burner is not turned on. I know you suggest using a blow drier; I wonder if I can just turn on the burner on HIGH and its own heat will dry anything that's wet? Any thoughts?
Hi!!! you could have a bad spark module my friend. Cheers 🥂
Hello, my burners are clicking when i light one or more but sometimes its just one burner that is not even in use, sometimes its all of them and I’m only using one. Sometimes its a random combination of a few clicking whether or not they are lit. Basically, as long as one burner is lit, one or more clicks! Can you recommend if the cleaning should help or if I should look into replacing the igniters?
The cleaning should do the trick👍
After cleaning it still clicks how do I replace the ignitor switch on the valve I have a replacement part but unable to get to the switch?
Can you send me an email at scottthefixitguy@yahoo.com so I can give you more detail on the fix?
Thank you so much! You just saved me a bundle. More power to you.
That’s what I love to hear 😊👍
Thanks!
You’re welcome 😊
Hi, I am having a similar issue w/ my RT486G. I have noticed the large silver cylender that feeds the propane is loose on the one burner that is clicking and the burner has a large orange flame ( in your video the cylender is at 7 o'clock on the top bruner and 2 o'clock on the bottom burner). I notice they don't move on the other burners. Is there a way to reattach these ? I can't tell if they are welded or glued? I also notice the clip on the porcelain igniter is missing so I will try to find a way to place that as part of my trouble shooting. I tried cleaning all the parts per your video but that didn't solve the problem. When mine ignites it has the large orange flame but never gets to the efficent blue flame and continues to click. Any suggestion would be greatly appreciated.
Can you send a video of that to my email at: scottthefixitguy@yahoo.com
Thanks, my igniter is nOT working and ceramic is broken and not exist.
what should I do. ?
Hi San,
I would order a new igniter👍
Nice video, I have the same exact stove from Wolf. I removed and cleaned everything, replaced all ignitors and the spark module. This included all the wiring from the spark module to each ignitor too. The left rear and left front burners work fine and independently. On the right side, however, I get a strange result. When I turn on either the front or rear right, all the ignitors continue to spark. They will only stop when BOTH right (front and rear) burners are turned on simultaneously. If I turn off either, all start to spark again. AS if they only want to work together! It doesn't stop if for instance, if I turn on one of the right ones and one of the left ones. Kind of annoying, but I'm not sure what else to do at this point, as everything is clean and all the electronics and wiring from the module is new. Any thoughts would be greatly appreciated. Thanks.
Thanks Robert,
Sounds like you did everything correctly.
You could just try for fun plugging your stove into an extension cord and plug them back into the outlet in the dining room.
Sometimes a bad ground in the kitchen outlet will cause weird sparking problems.
I have the same problem, I was wondering how did you solve this problem
@@GODforlife the wires for the left front and rear were switched. Easy fix.
@@RobertMost do you have a pic of the wires you are speaking of and how you know if they are switched around incorrectly?
@@jays2k_70rss6 it’s simply the wires to the burners. Just swap them
I just bought and newly installed and it still clicking
Can you try using an extension cord and plugging it into the outlet in the dinning room? That might fix it. The outlet in the kitchen might have a bad ground which will make it keep clicking.
Here’s a link to our new DIY repair channel with over 400 appliance repair videos: czcams.com/channels/bQy5UxlvaPPsDHvfvW76JQ.html
My gas stove is clicking ..I rubbed alcohol ..cleaned it but it s not working ...can I cook with clicking ignitor..is it safe?
It’s safe. Do you think the burner got wet?
@@QuickAndEasy5MinuteAppliance yes may be but I cleaned it ..but clicking is not stopped so I called technician..hope it will resolved
hI,,what is that little piece you are cleaning at the 4:38-4:39 time,,I need to replace one on my stove,,dont know the name,, thansk
Burner, Inner Head
You can easily replace the igniters…
What switch??
There’s a flame ignition switch located behind the burner knob below the front panel.
I was cleaning my stove like this the other day and I got shocked. I’m sure it was the igniter but how do I prevent that. It definitely startled me and I don’t want it to happen again.
Also, you mentioned cleaning it with rubbing alcohol on a Qtip. That’s not dangerous?
That’s super safe👍
I've not had that happen but perhaps you learned on the knob and turned it slightly to ignite? Maybe wear gloves next time too?
We just bought ours and its clicking. Ridiculous for a 6k range! Nothing fixing it. My range only comes apart at the burner head. I think you have an older model
Thanks Tess,
Can you try plugging it into an extension cord in the dinning room?
It might be that outlet has a bad ground that makes the stove continually click.
Please post back to see if that helps👍
@@QuickAndEasy5MinuteAppliance well try but i would imagine all the range spots would do it. Its only two of six that click. I tried cleaning it throughly last night. Ill try the breaker method you mentioned.
Did all this. Didn't fix anything!!! 😓😓😓
Hi Adele,
Can you send a video of that burner to my email at: scottthefixitguy@yahoo.com