Chris shows us the Whelen 9 Function High Current Power Control
Vložit
- čas přidán 20. 08. 2024
- sirennet.com/wh... The Whelen 9 Function High Current Power Control offers the ability to control many high current loads from one convenient switchbox. Six programmable push-button switches and one programmable three position slide switch controls nine total 20 amp fused circuits using built-in relays. Connects to most lightbars that use standard switching, and auxiliary warning equipment without the use of separately mounted relays or relay boxes.
Features:
Control 9 lightbar functions or other auxiliary equipment.
Front panel programmable slide switch with three 20 amp relays.
Six front panel programmable push-button momentary type switches with 20 amp relays.
All switches can be programmed to activate any combination of the relay outputs, or any other momentary push-button switch.
The 6 momentary switches can be easily programed for one of four operations, push-on push-off, momentary, flashing or timed output.
Easy reset to factory default.
Clone one controller to another.
Any switch can be programmed for siren activation.
Auxiliary input slide switch, position 3.
Momentary contact for low power, trunk lock or gun lock control.
Long lasting solid-state green LED backlighting makes it easy to read the translucent legend buttons at night.
Active switches are easily identified in bright sunlight or at night by a red indicator located just below each button.
72 press-on legend tabs.
Individual 20 amp fused outputs.
Designed to stack-mount with the WS295 Series Siren amplifiers or Traffic Advisor Control Head.
Includes a universal bail bracket strap mounting kit for over or under dash mounting.
Dimensions: 6.125" W x 1.5625" H x 6.25" D.
Weight: 1.75 lbs. (0.8kg).
Whelen Two Year Warranty
Very well explained.
Thank you :)
Was pretty interested in this until I see that the main power harness goes in the top and everything else goes in the back.
Unless there is a 90 degree angle plug in for tight spaces...
Why would they have the main harness come out of the top... makes no sense
Thank you very much for the video it helped a lot!
I just want to know how to wire lights to it. No one has a video of it.
Can I set a button to have a different flash pattern than another? For example a ULB9S or Whelen Slim Miser - one button do a flashing pattern and another button do a steady burn on the same light? Basically the question is can I set individual flash patterns?
I have this unit and it uses a traffic advisor on the rear of the bar. Recently the right arrow stopped responding. The button lights up but the bar keeps its main pattern. All other buttons do as programmed. Is this something that needs to be reprogrammed? When I use both for a center out pattern it still shows a left only. Right and center are unresponsive.
Have you checked over your wire connections to see if anything's come loose?
@@SIRENNET Got it! Found a damaged connection at the back of the unit. Must have been kicked or something. Put a new connector in and got 'er goin
Awesome!
So can the slide be separate from the 6 buttons so I can have flashing lights on the slide and then take downs alley left alley right and pod lights on the buttons
Sure can.
I'm thinking about using this to scene lights on a vehicle that has only scene lights, is this possible?
+LIPD Productions Inc. Most definitely. Just keep in mind the Amp. rating each Switch can handle.
SIRENNET Got it
So what kind of control panel do you recommend? I have the federal signal smart siren 2000 however everyone I've asked doesn't know how to connect the pa speaker and the lights to it.
Can you please help? Any suggestions?
Please give us a call and we'll try to lend a hand. We're available at (888) 959-0911.
Can I use Velcro to attach this to my dash?
Make sure its very strong Velcro.
Can you use non whelen lights with this unit?
Yes it's just a fancy switchbix
نايس رائع
Wiring into a slightly older version of this controller, do you recommend using separate relays for a full size freedom? And a separate relay for each alley and take down function?
Do you have the part number? We can get an install guide for you :)
SIRENNET it's the PCCS9P. Also looking for a bail bracket or mounting hardware for it.
Might it be a PCCS9N? www.whelen.com/install/133/13320.pdf
For details on the bracket, please email our Sales Team: info@sirennet.com
Can you connect any lights to it? Or is it only for certain lights.
So long as your paying attention to the inputs and the draw there rated to handle, using warning or off-road based lighting should work.
SIRENNET I have corner strobes and 2 traffic adviser bars I want to connect to it. Will it work?
For you're corner strobes, you'll connect the lead control wire from the power supply and output trigger to one of the inputs on the PCCS9RW. Are the traffic advisors 2-wire or do they run off of their own control-head for left, right, center out and warning?
SIRENNET both front and back strobes have a switch but the back strobes switch have an on off button and another one for the pattern. And both traffic advisers have a switch same as the strobes.
So long as the products you'll be using have 12volt activation trigger wires for On/Off control, connecting them to this unit should yield the control you're after.
Is Stuart the owner of Sirennet?
***** He is.
I knew it!
Can it handle PA?
It sure can. It's very common for the last Push Button to be set as Momentary as used with a Power Air horn Amplifier... such as the Whelen PAH112.
+SIRENNET thanks for your answer!
Can I set a button to have a different flash pattern than another? For example a ULB9S or Whelen Slim Miser - one button do a flashing pattern and another button do a steady burn on the same light? Basically the question is can I set individual flash patterns?
KSUTKOWSKI - Visual FX and Digital Production Both the Slim-Miser & ULB9S only offer one Flash Pattern to be used at a time. They unfortunately do not have the ability to Flash with one button and Steady-burn with another.