COMPLETE Internal Media Set-up of my CANISTER FILTER!

Sdílet
Vložit
  • čas přidán 8. 09. 2024
  • We're going in! Inside each tray of that SunSun 704-B that I'm adding to the 210 gallon South/Central American Cichlid tank. No matter what kind of canister you use or want to use, whether you're new or expert with canister filters, you're going to get something out of this video.
    All the media I'm using and why I'm using it, shown and explained in detail. It's essentially "Canister Filter Master Class, Part 2!"
    I hope you enjoy this video. It includes proven steps that have been used by me and many others over many years to get the best performance and results with canister filters.
    Do you have a tip or suggestion for canister filter users? Share it in the comments below! We all learn from each other at this channel. Remember to always be learning and don't ever forget that you reading this right now - YOU ROCK!
    Most of the products shown in the video, including the canister filter, media and water alarm can be acquired at my Amazon store:
    www.amazon.com/shop/benochart
    If you like the content of this channel please don't forget to hit that sub button, thumbs up and notification bell. It tells CZcams that something worthwhile is going on and encourages CZcams to share the channel with other fish keepers like you and me.
    Lighting of the 210 gallon Cichlid tank behind me was provided by JC&P and AQQA. For JC&P LED lights and the other aquarium products they offer use this link:
    jcpaquarium.com?sca_ref=936021.gPiOsPIQTH
    For AQQA/Hygger lights use this link:
    www.amazon.com/dp/B09LQN76Q4?ref=myi_title_dp
    For 10% off AQQA use code: AQQA2022
    Remember that fish keeping is truly a "fluid situation" and what works for one set-up might not work for another. Do plenty of research gathering information from several reliable sources before making any changes in your aquarium.
    Some of you have asked for a way to support the channel. I thank you for asking. Here are a couple ways you can help to keep the content coming:
    - Join the "Garage Gang" by becoming a Patreon member and get early access to videos and behind the scenes content not available to the public. Use this link for more info: www.patreon.com/user?u=13754188
    - Do you shop on Amazon? Use this link to visit my Amazon store (and for all of your Amazon purchases, fish or non-fish related): amazon.com/shop/benochart
    Any qualified purchase, after using that link to get to Amazon, will provide the channel with a small percentage. You still get the best price on all goods, so we all win!
    - Visit my TeeSpring store at:
    ben-ocharts-st...
    and pick up some channel merchandise. The store offers coffee mugs, tees, hoodies and other cool stuff. All purchases pay the channel a small percentage. Use "LIVESTREAM" for a 10% discount at check-out.
    Live Streaming
    Join me and a great group of fish keepers on Saturday's at 11am Central (that's 9am Pacific / Noon Eastern) for The Cichlids & Coffee live stream. It's a great hour of fish fun and gets into everything from setting up a tank, proper filtration, fish selection and everything in between. I hope to see you there.
    A big shout-out to my channel sponsor THE CICHLID SHACK, a provider of top quality fish and fish keeping food and supplies. Visit the shack at thecichlidshack.com and use "shackattack10" for a 10% discount on all products (including food) and use "shackattack15" for a 15% discount on all fish purchases that total over $100.
    Note: Discounts do not apply to shipping cost.
    Thank you to key vendors that have helped with my new fish room including:
    Aquarium Co-Op, a top provider of both products and knowledge for all types of fish keepers.
    Sicce, a top quality manufacturer of aquarium pumps and filters.
    Hygger/AQQA - makers of a variety of aquarium products such as lights, pumps and heaters.
    JC & P, providers of lights, rocks and other quality aquarium products.
    Underwater Galleries, makers of the most beautiful ceramic caves available.
    Xpertmatic, maker of good quality internal filters and air pumps.
    Many of these products are listed in my Amazon Affiliate store at:
    www.amazon.com/shop/benochart
    For a behind the scenes look and access to photos and videos not posted anywhere else, please follow me on Instagram at: ben.o.cichlid
    If you're looking for a very helpful, knowledgeable and supportive group, check out the "Ben O'Cichlid" group on Facebook. Cichlid is in the name but all types of fish keepers are welcome. Be sure to answer all the join-in questions or the group moderators will not let you in. It's how we keep the trolls out.
    Thank you for the on-going support and encouragement!

Komentáře • 57

  • @andreashessler838
    @andreashessler838 Před 2 lety +4

    Really great to listen to someone who knows what they are talking about.
    One thing that I have heard about the APS canisters (same as SunSun). The o-rings don't tend to last long for some reason. I have seen some people wrap this area in PTFE tape as an insurance.
    I can imagine that it would be a nightmare if this failed and it pissed your tank all over your carpets or hard wood floors. Otherwise, a very decent filter for the price.

    • @kunalravisingh4382
      @kunalravisingh4382 Před 2 lety

      I have a sunsun 304..three months it started leaking. Change of O rings and tape hasn’t helped at all. Any suggestions to stop it from leaking?

    • @andreashessler838
      @andreashessler838 Před 2 lety

      @@kunalravisingh4382 If it was 3 months, I'd be taking it back to the shop.
      Check that the lid is on properly and that the o-ring isn't crimping or incorrectly positioned.

    • @FishTankMonsters
      @FishTankMonsters Před rokem

      I had both my sun sun do exactly that wifey was angry lol rightfully so I came home to a flood and over 100 gallons of water on our carpet in the basement it took forever to dry up and a lot of vacuuming and fans to clean shortly after the second one leaked even with Teflon tape over the gasket we thought it was best to remove the sun sun and added fx6 filters problem solved we paid a lot more for the fx6s but worth the peace of mind with anything you get what you pay for 🤙🤙🤙

  • @cichlid_kings
    @cichlid_kings Před 2 lety +3

    I've read in alot of places that filter sponge is a great home for beneficial bacteria. Nice work 😎

    • @BenOchart
      @BenOchart  Před 2 lety +2

      Makers of expensive bio media hate that emerging truth.

  • @paulrichardson2229
    @paulrichardson2229 Před 2 lety +3

    I’m with ya on the topic of Sunsun filters they are great filters never had any problems with them

    • @BenOchart
      @BenOchart  Před 2 lety +1

      Maybe a better title would have been, “SunSun Don’t Suck!”🤣🤣🤣

  • @chrisg.9892
    @chrisg.9892 Před 2 lety +3

    I totally agree with the way you set it up. That is why I like the sunsun because the fx6 is bass akwards in my opinion..

    • @catsailor8621
      @catsailor8621 Před 2 lety +1

      @ Chris G…I have an FX6 and like it a lot, but it is a beast to move around and/or remove from my tank stand (which is not really built for an FX6). And, I’m waaay overdue for maintenance on that due to shoulder surgery a year ago. So…I’m mentally working up to getting that out of the cabinet and cleaned up! Great to chat with you today at the livestream! 👊

    • @BenOchart
      @BenOchart  Před 2 lety +1

      I too hated having to remove it from under a tank. Now it’s elevated behind the 300 and very easy to work on.
      I suggest that you buy a long hose that will fit snuggly on to the bottom purge valve. Run the hose out the door, shut off the IN/OUT valves, unplug and detach the top hoses. Then open up that purge valve and let all the water drain. It is a lot easier to move after this.
      Be sure to close that purge valve and fill before plugging back in or you’ll have a mess (and a burned out pump!).

    • @chrisg.9892
      @chrisg.9892 Před 2 lety

      It was great to chat with you also !!! There is no doubt the fx6 is the best canister on the market . But unless you have a huge tank like Ben Ochart does .Personally I don't think it is needed for anything less than a 125 gallon. Remember that's just my opinion. Have a great week @CatSailor and You also @Ben Ochart 🙂🙂

  • @MiguelJimenez-by9fh
    @MiguelJimenez-by9fh Před 7 měsíci +2

    You are the best thanks

  • @32cichlids
    @32cichlids Před 2 lety +3

    I just started watching your Channel I wanted to say thank you for all the information you put out I just did my sunsun the same way and it's working very well👍👍

  • @MFTAQ
    @MFTAQ Před 2 lety +2

    Awesome set up on the canister, That is exactly how my Pen Plax (Cascade) 1500 is set up, I love pond guru and his filter series.

  • @robg915
    @robg915 Před rokem +1

    Everything been says in this vídeo is backed up in this highly informative article. I pulled all my Seachem Matrix and replaced with 30 PPI sponge. My water has never been so crystal clear and healthy for my fish. Stop wasting money on expensive biomedia!

    • @vinniediego
      @vinniediego Před rokem

      I'm pulling all my Matrix out too, tomorrow first thing

    • @robg915
      @robg915 Před rokem

      @@vinniediegogreat decision.

  • @brandykay9851
    @brandykay9851 Před 8 měsíci

    I'm wanting to switch from a HOB to a canister. What was in the top tray? You mentioned polishing balls. Where do you get these?

  • @coreymelanson6729
    @coreymelanson6729 Před 2 lety

    You can purchase Poret foams from the same place you get your Biohome media from (assuming we all get their) here in the USA, Greatwave Engineering. They come in much more manageable sizes than what I've seen on your videos. Though I can't speak for any cost difference, I'm happy with the foams & media from Don Chamberlian. I have nothing against Swiss Tropicals as I am not familiar with them personally. Those foams just look like nightmare to cut :) Thanks for the videos.

    • @BenOchart
      @BenOchart  Před 2 lety

      What I’m using Corey are some left over pieces from my Swiss Tropicals sump sponge order. What they don’t use when cutting your custom sponges they send to you

    • @coreymelanson6729
      @coreymelanson6729 Před 2 lety

      @@BenOchart I seen those large block shaped foams in your recent videos & knew there was an easier way. After reviewing the Swiss page it appears to have the same foams as GWE & in more size options.

  • @stlconsulting8462
    @stlconsulting8462 Před 2 lety +2

    Hey Ben what made you change from the rippled green blue and black type to the full block?

    • @BenOchart
      @BenOchart  Před 2 lety +1

      Just what I had on hand. Truth is I prefer the egg crate style sponges but these from Swiss Tropicals last forever.

    • @robertjohnston25
      @robertjohnston25 Před 2 lety

      @@BenOchart what do you prefer about them?(the egg ones) they have less pores o.O

  • @catsailor8621
    @catsailor8621 Před 2 lety +2

    Ben? Are you still recommending Pinky Floss? Seems to me you liked it a lot at one time, but went away from it at some point later on. I still have some on hand, but if you’re recommending something better…I’m all ears??? 👂🏿👂🏿

    • @BenOchart
      @BenOchart  Před 2 lety

      I still use it, it’s great stuff, but I’m using reusable media everywhere I can.

  • @frankiefingerz8047
    @frankiefingerz8047 Před 2 lety

    I always get rattling from my 704 b’s i removed some biohome it still rattles i love how much water it moves & i love the built in uv they dont suck but they r rattleboxes

    • @BenOchart
      @BenOchart  Před rokem

      Mine never rattled. Be sure the impeller is seated properly and the screw down top in snapped fully in place. Also, be sure to place it on a foam pad.

  • @FishTankMonsters
    @FishTankMonsters Před 2 lety +3

    Hey Ben if the sun sun 704b comes with the built in uv why not utilize the benefits of the uv?? The benefits of the uv are countless I run 3 fx6 on my 220 and I use the turbo twist and my water is crystal clear and the uv gives the water that extra polish you talk about plus it helps to keep algae and ich and other water colom parasites at bay just curious

    • @BenOchart
      @BenOchart  Před 2 lety +1

      Look at the watts and gph of the twist. It’s a true UV. The 9watt bulb does hardly nothing to water rushing past it at such a high gph. Real true UVs like your twist are awesome.

    • @FishTankMonsters
      @FishTankMonsters Před 2 lety +1

      @@BenOchart I understand now I completely agree with you my fish friend love your videos ben

    • @gregward8234
      @gregward8234 Před rokem

      Ben actually got me hooked on the sun sun filters I have a 704b and I've got a sun sun 3000 and a fx6 only problem I had with the sun sun 3000 was it started to leak at the top o-ring and it was not that old so I saw a video from a guy from Australia use some white plumbers Teflon tape I wrapped it around twice put top back on no leaks I'm still a sun sun fan can't beat the price or the performance..ty Ben

    • @FishTankMonsters
      @FishTankMonsters Před rokem

      @@gregward8234 sun sun is a good product I like the fact it comes with a built in uv as well the only issue I have is I had 2 704b both leaked I have had fx6 3 of them for years I never had an issue with them but some people never have an issue with sun sun products and yes the price point is excellent

  • @mikejejenich7116
    @mikejejenich7116 Před 2 lety +1

    Hey ben 🐠. 💦. Ive always had fluval filters……. Maybe on my next tank. Ill try different brand 👋✅

    • @BenOchart
      @BenOchart  Před 2 lety

      Fluval FX is a great can but they’re pricing themselves out of the market.

    • @mikejejenich7116
      @mikejejenich7116 Před 2 lety

      @@BenOchart i agree. Seems Evorything fluval. Is high

  • @kunalravisingh4382
    @kunalravisingh4382 Před 2 lety

    Any suggestions to stop a leaking sunsun304? Have tried change of Orings and Teflon tape but nothing worked. Used plenty of silicone grease on the Orings as well.

  • @awesomenesss
    @awesomenesss Před 2 lety +1

    Hey Ben!! Wassup??? Hope you are doing good 🙂

    • @BenOchart
      @BenOchart  Před 2 lety

      I am. How are you doing ?

    • @awesomenesss
      @awesomenesss Před 2 lety

      @@BenOchart I am doing fine Ben... Thanks!
      You were posting videos once in every two days and since its been 3 days and there wasn't any video from you, I kind of felt like missing something... so just checked upon you 🤗🤗🤗

  • @mikejejenich7116
    @mikejejenich7116 Před 2 lety

    Hey ben. 🐠. Do you use. Seachem. Lake salts ? Trace ? In your tanks ? I wanna. Buy there seachem acid buffer. Akaline for my planted tank. 🌱.

  • @jorgechavira7729
    @jorgechavira7729 Před rokem

    Is it a good idea to have a pair of canister filters in a tank with big capacity, like 200 or 250 gallons, one for chemical and mechanical media and the other one for the biological media?

    • @BenOchart
      @BenOchart  Před rokem

      I always prefer two filters for back-up. And I set them up the same. If one breaks down or is being cleaned the other one does a good job keeping things in good shape.

  • @timsgarage1861
    @timsgarage1861 Před rokem

    Just want to make sure.. The black part that connects to the top of canister and has the in/out hoses connected (with that open close flap). Is it suppose to be able to just pull out of the canister top with the flap in the open and closed position?

    • @BenOchart
      @BenOchart  Před rokem

      Yes. It detaches completely.

    • @timsgarage1861
      @timsgarage1861 Před rokem

      @@BenOchart Thanks! I was thinking it locked in after putting the flap/valves in the open position.

    • @MuhammadYasir-2526
      @MuhammadYasir-2526 Před 8 měsíci

      @@timsgarage1861Never open the lid without detaching the flap.

  • @Chris-dh8mg
    @Chris-dh8mg Před 2 lety

    Hey Ben I just recently got my 125 severum and geophagus red heads tank set up what do you think if I added 6 emerald corydoras into the mix.

    • @BenOchart
      @BenOchart  Před rokem

      Should be fine. I think they’ll leave corys alone.

  • @scottenichols
    @scottenichols Před 2 lety

    Hey guys what type of food grade o-ring lubricant should I use for my fx6 filter. Sorry if this is an old question I just started out

    • @BenOchart
      @BenOchart  Před 2 lety +1

      I’ve been using “Husky” but any food grade silicone lube will do the trick.

  • @mycatmax9658
    @mycatmax9658 Před 2 lety

    dont know if you know anything about Aquael - ULTRAMAX Filter

  • @k9feces
    @k9feces Před 2 lety +1

    It kills me when you say sponge is mechanical filtration when it is the best biological filtration.

    • @BenOchart
      @BenOchart  Před 2 lety +1

      Please don’t die on me. Did you see the comment in the video about that?

    • @k9feces
      @k9feces Před 2 lety

      @@BenOchart ha ha, I missed it 🤦🏻‍♂️☺️