QUICK LEARN Dodge Caravan 62TE Transmission for harsh shift after fluid change or battery swap
Vložit
- čas přidán 6. 07. 2024
- Dodge Grand Caravan or Chrysler Town and Country mini vans should have the quick learn procedure done anytime the battery has been disconnected if there is a harsh or different shift point once the battery is replaced also a dry start with a pump prime code after a fluid and filter change
Check out our amazon store for items or products used in our videos
www.amazon.com/shop/codemansa...
#automobile #diy #mechanic
symptoms
- harsh downshift
- harsh first to second shift
- harsh engagement
- erratic shift points
- firm shift
- slide bump shift
- jerk / jerking
- rough / harsh kickdown
as an amazon affiliate I earn from qualifying purchases at NO extra cost to you - Auta a dopravní prostředky
Thanks! I've been woried my trans was failing in some way. My 2009 Town and Country with 194000 was shifting so wierd before I did this Quick Learn using my ThinkDiag. Shifts great now!
can you do a quick learn with out the $700 unit? I swapped the fluid and changed filter because no shop around me was going to do that they just pull the fluid I guess. after dropping the pan and doing the filter change I put back in 5.5 quarts of atf +4 and some lucis detergents I was recommended by the mechanics. it shifts great in all the lower gears but has popped 3 codes P0792 P1741 P0735. The reason for the drive to work on the AT is I had a gear 2 ratio code hit it recommended fluid change as repair. This is a van for a disable girl so any help with ideas would be greatly apricated
Had fluid and filter change at local Dodge dealership 52,000miles and all was well for about 5000 miles.. Battery dies and had to jumpstart to take it to shop and have a new battery installed.. shortly thereafter, the transmission developed some hard shifts and “flare” .. it just started acting weird and I have been wondering if that battery incident had something to do with all of this… glad I found your video.. I guess I can take it to the dealer and take a chance to see if a procedure like this will help
yes that would be a good idea, I have surprised a lot of customers who thought they needed a new transmission
What model Autel are you using?
Would this help with rough shifting?
Do i need to program a used transmission or will quick learn work?
Will any cheap autel scanner complete this task?
No
What autel model do you have?
we have two different ones that we uses in our videos one Is MAXISYS ELITE the other is MAXISYS ELITE ll PRO
Which model scanner did you use here?
I want to order from your amazon page
The scanner I have now shows the code but says its permanent will this scanner clear this with the quick learn?
Hello what Autel scanner is that?