I got a vid where the load was pretty huge to where they needed trucks with boom cranes and utility buckets to raise traffic lights and took up a three lane hwy in El Paso tx don’t know what the load actually was but had at least 20 axles or more awesome things to see on our roads sux when your stuck behind them lol that’s why I got my CDL
@@Steeringwheelholder740 Ive seen the same setup in as in the video hauling a tranformer unit to a dam. The load was 18ft wide. 16ft high and 18ft long. They had 3 trucks pulling it and 2 on the back pushing it. It took them about 5 days to go 100 miles. I would pass by them evey day, they would only be a little bit farther than the day before. They had to go over a mountain because the other way that was closer had an over pass they couldn't fit under.
@@Steeringwheelholder740 I got my CDL or Az as we call it in Ontario so I could float my own machine. 4 axles on the truck and 4 on the float was by g enough for me. Im a trim dozer operator not a float operator. Even thou I have great respect for them. Just drop off my D9 and be on your way lol
@@omary2158 still, THIS big of a trailer for less than 300,000 kg?!? Seriously? There's literally a bunch of KW c510s hauling over 300 tons with just 4 quad axle trailers, and you're telling me 300 tons needs THAT big of a trailer?
That small thing is surely not the worlds biggest truck load. Here in Germany we have trailer with 20 axles (only thrailer, without the tractor) and they use two of them to transport transformers 4 times as big as this small load.
Cute, seen 2 v8 superliners Mack's in Australia pull 770 tonne electric transformer with ease. Even then seen fair bit heavier being pulled. Out in the desert in aus with the bigger road trains without load on em are 350 tonnes then load em up you can only imagine, doing spring packs every couple days an tyres. Shit go ahaha
There are a number of trucking companies that specialize in that niche of heavy haul. Granted not nearly the number of 19 axles, without pushers, out there as 13 or less axle rigs.
Often it's not the pushing that is the problem, but rather the braking when going down prolonged hills and the need to maintain control to prevent runaways. An ordinary truck running away and crashing is bad, but if the item being carried is particularly important, expensive and has a considerable lead time for construction and transportation, then getting to the job site safely and on time becomes very important.
Yeah but the only reason Aussie loads are so big because the terrain and congestion is much easier. Aussies aren’t hauling those superloads up 12% grades or around heavily populated cities
@@ernestflemister7912Exactly, it's more difficult here by a long shot. I don't know why some people can't see past their own ego. All they see is a possible "flex."
ok, nobody is going to talk about , What the Heck that is !! ?? , it does not look that big , nor that long-tall- wide, but requires 18 !! axels , 72 wheels (+obviously 2 front for steeering) to distribute the Weight !! , thats crazy... it might be US National Debt. 31.46 T !! , or what
And that is before we know exactly what the load is! It is not that big, obviously very heavy and compact, so what ever it is, is not something that you can just pick up anywhere.
Saw one one way bigger than that .2 air separater towers both in 2 pieces bout 150 foot long nothing but axles under that went to a local plant came in on Great Lakes ship
Definitely not the biggest... but Definitely one of the heaviest loads for its size.
I'm pretty sure they're is more to it
I got a vid where the load was pretty huge to where they needed trucks with boom cranes and utility buckets to raise traffic lights and took up a three lane hwy in El Paso tx don’t know what the load actually was but had at least 20 axles or more awesome things to see on our roads sux when your stuck behind them lol that’s why I got my CDL
@@Steeringwheelholder740 Ive seen the same setup in as in the video hauling a tranformer unit to a dam. The load was 18ft wide. 16ft high and 18ft long. They had 3 trucks pulling it and 2 on the back pushing it. It took them about 5 days to go 100 miles. I would pass by them evey day, they would only be a little bit farther than the day before. They had to go over a mountain because the other way that was closer had an over pass they couldn't fit under.
Gheesh!! 😮
@@Steeringwheelholder740 I got my CDL or Az as we call it in Ontario so I could float my own machine. 4 axles on the truck and 4 on the float was by g enough for me. Im a trim dozer operator not a float operator. Even thou I have great respect for them. Just drop off my D9 and be on your way lol
I love that trailer. It distributes the weight over 72 wheels very evenly.
Laughs in Australian
Alberta as well
Bye
😂
@@Bob-jn1fx😂
This is more impressive because it's a lot tighter here. Anyone can drive a road train in a country as wide open as Australia..
Would like to know how much that weighs.
I bet that trailer set up is easily over 1,000,000$ or pretty close to it
More then a million. Probably 2.5
That's the USA budget for 2023 in $1,000.00 printed bills. All wrapped and loaded for DC.
With 4 more loads scheduled.
Don't forget Ukraine
As soon as you mention how big it is, there’s always someone else waiting with the “well, it ain’t that big”
Honestly it ain't....
Also, why are they using such a massive trailer for a load that's probably not even 300,000kg? It just seems unnecessary.....
@@bmad1386you don’t know how dense the material is. Hell, you don’t even know what it is. You just validated this guy’s point
@@omary2158 still, THIS big of a trailer for less than 300,000 kg?!? Seriously?
There's literally a bunch of KW c510s hauling over 300 tons with just 4 quad axle trailers, and you're telling me 300 tons needs THAT big of a trailer?
That small thing is surely not the worlds biggest truck load.
Here in Germany we have trailer with 20 axles (only thrailer, without the tractor) and they use two of them to transport transformers 4 times as big as this small load.
I count 19 axles with a total of 74 tires. Thats a lot of rubber!
That’s cute and nice try though. Check out Edward’s moving and rigging. This load is considered light work for them
Cute, seen 2 v8 superliners Mack's in Australia pull 770 tonne electric transformer with ease. Even then seen fair bit heavier being pulled. Out in the desert in aus with the bigger road trains without load on em are 350 tonnes then load em up you can only imagine, doing spring packs every couple days an tyres. Shit go ahaha
I just LOVE how everything become "biggest in the world" in USA 😂😂😂😂
So… wide turns then? 😂
Wow! That's some cookie jar, Sheldon.
Heck of a good Rigg for sure
Biggest...yeah right!!!!😂😂😂😂
Damn trailer weighs more than what's on it
*When you bought the biggest baddest heavy haul trailer on the market. And the market has no need yet*
There are a number of trucking companies that specialize in that niche of heavy haul. Granted not nearly the number of 19 axles, without pushers, out there as 13 or less axle rigs.
Obviously you don't know anything about the market 😂 go sit down
Nice one . Check out Diamond Heavy haul. They got a 20 axle right with a self contained 4 axle pusher. Controlled from the lead cab.
Often it's not the pushing that is the problem, but rather the braking when going down prolonged hills and the need to maintain control to prevent runaways.
An ordinary truck running away and crashing is bad, but if the item being carried is particularly important, expensive and has a considerable lead time for construction and transportation, then getting to the job site safely and on time becomes very important.
It's so beautiful
Been driving 35y now. Don't want anything to do with that.
Why??
I want to see it make a 90 degree turn!
The back axles steer so it corners like a Lamborghini lol.
It'll make a 90⁰ curve, lol
It can do it but it requires a fair amount of space on a good solid surface.
Never had any desire to go that big lol 😅 I'm good with my 13axle 🤙
You need a big trailer for something like that
But! Can you back it into a dock?
Kidding
And that some Nuke thing... maybe the real thing weight only 5 pounds.... but the case are made of solid lead...
Dang that has to weigh at least 50,000lbs maybe even a little more tbh
Amazing machine 😮😮
I change my 18 tires and feel sick for days for the money I spent $9K, I can't imagine changing 74 tires thats like $37K
Nice,but worlds biggest?,I doubt it
Come to india my friend
what on earth could b so small and b so heavy 😮????????
That's insane.
What the heck is that thing made out of solid lead?? Looks like its ¹/¹⁰ the mass of those mining trucks you see them hauling all the time.
Yeah it’s big! The really big loads have multiple tractors though.
That had the push pull bar on the back for another power plant and/or braking truck
@@ATK111 So where was the rear truck?
@@markfryer9880 There is no rear truck, but there’s a bar for it to hook up to if needed right at the end of the float where it’s suppose to be
Tonka toy compared to Aussie heavy loads
Yeah but the only reason Aussie loads are so big because the terrain and congestion is much easier. Aussies aren’t hauling those superloads up 12% grades or around heavily populated cities
@@ernestflemister7912Exactly, it's more difficult here by a long shot. I don't know why some people can't see past their own ego. All they see is a possible "flex."
@@Bullet44Not that Americans would ever 'flex'! 😂
ok, nobody is going to talk about , What the Heck that is !! ?? , it does not look that big , nor that long-tall- wide, but requires 18 !! axels , 72 wheels (+obviously 2 front for steeering) to distribute the Weight !! , thats crazy... it might be US National Debt. 31.46 T !! , or what
I've seen bigger, he don't even have a pusher.
Or multiple pushers!
That's not the world's biggest truck load. I've seen bigger.
What's the weight of the load?
What is it uranium?or platinum?
Now that's a Load lardy 👀 sweet 👀 pay day
Looking to me like the axles have full weight just supporting the monster frame of the trailer
Damn! Takes all that gasoline to transport that electric battery!
Click bait title as usual 😂😂😂
Not even close. Have you seen the windmill haulers?
I think the trailer is more heavy them the load
Definitely not one of the biggest but perhaps one of the longest
How much weight?
Australia entered the chat
Bit over the top with a load that size needing a massive trailer
Serious question, how can this turn? I'm guessing this isn't allowed on highways?
Yes it’s allowed on highways. And all of the axles are steered by hydraulic’s.
I'm highly suprise that big load dosen't have steer axles on it with somebody riding and steering them.
What’s being hauled
Cozad ?
What is it?
Biggest load in the world with one prime mover 😂😂😂😂
Biggest overkill more like 🤣
19 axle isn't near the biggest. Bigger than average, smaller than a lot though
Heavy machine 100% power diésel.
Would suck to buy new tires
World’s biggest load? On 19 axles? You might check around before using titles like this first
Okay, so what exactly is on the trailer and how much does it weigh?
Good ole deactivated nuclear core
Hope was year worth pay n sit d rest 🙃
Pues pareciese que sólo existe en los Estados juntitos 😂😂
Another submarine reactor going to our enemies..thanks brandon
He wouldn't have any idea what you're talking about.
Probably a motor or generator armature.
Thats baltimore marine port
👍🏻👍🏻👍🏻🍺🥩😎🇺🇸
Let’s just say that man ain’t turning
All that for a plastic water tank?
Ya just back it up over here. 😅
Not quite
Thats half size. Better Google diamond heavy haul. Need to be getting into 146 tire range.
Can someone please explain to my why they need all that just to carry one small tank?
Man I would love to pull freight like this
Not big enough. Seen what hauls the earth movers?
Come to Alaska
I see this and all I see is 💰 💰 💴 💵
And that is before we know exactly what the load is! It is not that big, obviously very heavy and compact, so what ever it is, is not something that you can just pick up anywhere.
weight please
Is it solid plutonium? Like why tf is it that heavy
Beau transport sa
for that
.someone got fooled
Try getting that threw McDonald’s drive threw
422,000 max, Baycrane does over 1200 ton loads
How do you know about Bay???
74 wheels. Wonder what that was built to carry?
I hope it's not going to Down town new York.
Saw one one way bigger than that .2 air separater towers both in 2 pieces bout 150 foot long nothing but axles under that went to a local plant came in on Great Lakes ship
It not the biggest but one of the heaviest
I see a plamate cooler let's tip a few
I’m not a trucker, but how in the hell is that small tank that heavy? 😂😂
It’s a coil. Very heavy and extremely dangerous.
Yeah, this is a big load, but I've seen bigger & heavier.
Not hardly seen way bigger 2 laners.
Maybe for U S roads.
I’ve seen them with 20 axles lol
Not the biggest. A few years ago there was a accident involving a large metal tank that weighed over 600,000 lbs and it was on a 20 Axle trailer.
I’m looking at the crane boom launch trailer in the background. This one is in the way
Hi
I'd like to know what that rig cost
Sure is.