Awesome video. I popped my left one in and couldn’t figure out how to get it back into place.After watching the video I could just pop the USB out and snap the left one in from the back. Thanks for the insight!!
Good to know. My son was sitting in the middle seat and pushed his knee against it and it popped in. I have been trying to figure out how to get it back in place for 8 months now without taking the whole dash apart.
You probably thought about making a video after you had it all apart, still, watching it come apart would have been a big help. But you got me closer than I was before your video so thanks.
This was an EXCELLENT little piece of information. I am installing a brake controller in that very spot the "pushes back" instead of pulling out. Very timely and helpful.
Swapping a jump seat for a center console soon so I'm looking up how to wire the splitter harness. I think this video will prove to be extremely helpful! Thank you
Thank you guys!!! I’m currently waiting for my 2020 Chevy custom trail boss to come in off the truck to the dealership! And I hate I’m missing features from the LT All Star. Have you guys noticed anything else that would be helpful about the infotainment or center console before I start toying around with it?? This video itself earned my subscribe!
This helps, I’m gonna install a brake controller with a knob on that tab that pushes in so You probably saved me from scarring my plastic lol thanks for posting!!
Appreciate it man. I have a 21 gmc 2500 and i plan on doing a clean gmrs radio mount in between the two things on the side. I thought they came out like this. Good video man.
This definitely help me, I have a lower trim model and I needed to see the wiring so I can attempt to upgrade some of the hardware I didn’t get, usb C, 110 Volt, so thank bro...
Thanks for the video, exactly what I was looking for cuz Im considering doing so customization. Do you remember if the wires to the blank panels were hot?
So I’m struggling to put the left panel back in how am I supposed to put this in exactly my nalgene flew forward Bc someone decided to slam on the breaks to take a right turn this making me hit my breaks none of the tabs are broken it’s just I can figure out how to put it back in place
It snaps in from behind. You need ot take the other panels OUT then use a tool to snap that panel in by pressing BEHIND it. For EVERYONE who keeps commenting about this......that is as easy as it was.
Hi Can I purchase and change out my USB that is not working properly on my 20 Silverado ? Changed out generic cords, etc. I bought a $25 Samsung cord in case it was generic cords. The only conclusion is that it's the port itself that has issues. Suggestions on where to get a compatible USB port ? This is not in my wheelhouse; my brother can help me install it. Thanks in advance.
I just fixed mine in 2 minutes. Trick is to find the access point from underneath the drivers side. Get your phone camera in video mode with the flash on. Get up under the drivers side floor and look at your phone while recording. You can see the small access point. Reach your hand up in there and it easily pops back in
Could you upgrade to 110v outlet? I thought there was an additional switch to turn the outlet on and off with the trucks equipped with the outlet from the factory
I’ve gone up and down on all the comments lol do you mind telling me what tool you used exactly because I’m going out of my mind trying to push that panel back in.
soo I've read your reply to 104 questions. and it seems that you need to pop out another panel, use a tool and snap the left panel in from the back? is this correct? lol jk jk. good video you saved me from a full disassemble.
I have to tell people how easy it is to pop the left panel back in. I just fixed mine in 2 minutes. Trick is to find the access point from underneath the drivers side. Get your phone camera in video mode with the flash on. Get up under the drivers side floor and look at your phone while you’re recording. You can see the small access point. Reach your hand up in there and it easily pops back in
The right one snaps in from the front so you can just push it back into place. The left one snaps in from behind. You need to take the other panels out, then use a tool to snap that panel in by pressing behind it.
I just fixed mine in 2 minutes. Trick is to find the access point from underneath the drivers side. Get your phone camera in video mode with the flash on. Get up under the drivers side floor and look at your phone. You can see the small access point. Reach your hand up in there and it easily pops back in
Awesome video. I popped my left one in and couldn’t figure out how to get it back into place.After watching the video I could just pop the USB out and snap the left one in from the back. Thanks for the insight!!
Glad it helped!
Good to know. My son was sitting in the middle seat and pushed his knee against it and it popped in. I have been trying to figure out how to get it back in place for 8 months now without taking the whole dash apart.
Exactly what happen to me lol
How did you guys pop the usb ? My left one pup out also
But how do you put it back in. The one that snaps in the back? So do I need to remove the whole panel to pop it back in?
You probably thought about making a video after you had it all apart, still, watching it come apart would have been a big help. But you got me closer than I was before your video so thanks.
Time is the battle we all fight. It's always more time i want.
This was an EXCELLENT little piece of information. I am installing a brake controller in that very spot the "pushes back" instead of pulling out. Very timely and helpful.
Glad it helped!
Swapping a jump seat for a center console soon so I'm looking up how to wire the splitter harness. I think this video will prove to be extremely helpful! Thank you
Thanks for your comment! Keep watching for more great content.
I m glad you provided me right that I can go back and add the options I didn't get in mine
Glad we could help
Loved the video. Very helpful. My right panel is blank with wiring. Going to add additional USB in that one.
Glad it helped
Thank you so much for making this video, it was exactly what I needed to know!
Great! Glad it helped.
Thank you for making this video, this was a great help!!!
Glad it was helpful!
Definitely helped. About to add a 110 to that blank spot on the right
Glad we could help
How was the outcome? I want to do the same.
Thank you guys!!! I’m currently waiting for my 2020 Chevy custom trail boss to come in off the truck to the dealership! And I hate I’m missing features from the LT All Star. Have you guys noticed anything else that would be helpful about the infotainment or center console before I start toying around with it?? This video itself earned my subscribe!
Thanks for the subscribe. any tech tip videos we have will be in the DIY folder under videos on our website wickedwarnings.com
This helps, I’m gonna install a brake controller with a knob on that tab that pushes in so You probably saved me from scarring my plastic lol thanks for posting!!
Glad I could help
Thanks for the tip about the one panel needing to be pushed in.
Thanks for your comment. Keep watching for more great content!
Saved me from the same scars. Appreciate y’all so much!
Our pleasure!
exactly what I was looking for. Thank you
Glad I could help!
Awesome you saved me some aggravation on my 2021 trail boss I’m putting in a brake controller
Great to hear!
Thank you so much I really appreciate you showing how!!!
Glad it was helpful!
Do you have. Video of you popping them back in?
No sorry.
Appreciate it man. I have a 21 gmc 2500 and i plan on doing a clean gmrs radio mount in between the two things on the side. I thought they came out like this. Good video man.
Glad I could help
This definitely help me, I have a lower trim model and I needed to see the wiring so I can attempt to upgrade some of the hardware I didn’t get, usb C, 110 Volt, so thank bro...
Glad I could help
Excellent information in this video.
Thanks for your comment. Keep watching for more great content!
Thanks for the video, exactly what I was looking for cuz Im considering doing so customization. Do you remember if the wires to the blank panels were hot?
No, sorry
You helped me and I really appreciate it, Thank you!
Great! Glad this helped!
Was actually very helpful
Great, glad you liked it.
So I’m struggling to put the left panel back in how am I supposed to put this in exactly my nalgene flew forward Bc someone decided to slam on the breaks to take a right turn this making me hit my breaks none of the tabs are broken it’s just I can figure out how to put it back in place
It snaps in from behind. You need ot take the other panels OUT then use a tool to snap that panel in by pressing BEHIND it.
For EVERYONE who keeps commenting about this......that is as easy as it was.
This really helped me. Thanks for sharing!
Glad it helped!
Thanks for the great tip...I'm currently looking for a new vehicle and plan on mounting warning lights on it this will help thank you George
Glad it helped
You're in the wrong profession dude.. you need to be on a radio station lol
Thanks for commenting, keep watching for more great content.
Id love to pursue that...LOL
Thank you 🙌🙌
Thanks for commenting, keep watching for more great content.
George, could you make a video on removing the sunvisor clips of a 2014+ Chevy/GMC Silverado/Tahoe/Sierra/Yukon?
We will make a note of the request.
Thanks so much. Very helpful!
Glad it was helpful!
I almost broke the button that pushes back to be removed. Thanks!
Glad this helped!
Helped for sure! Thanks!
Glad it helped!
It helped me thank u.
Glad it helped!
how do I get the panel on the left back in place
It snaps in from behind. You need to take the other panels OUT then use a tool to snap that panel in by pressing BEHIND it.
Hey brother do you mind telling me what tool you used to push it back in please !
Hi
Can I purchase and change out my USB that is not working properly on my 20 Silverado ? Changed out generic cords, etc. I bought a $25 Samsung cord in case it was generic cords. The only conclusion is that it's the port itself that has issues. Suggestions on where to get a compatible USB port ? This is not in my wheelhouse; my brother can help me install it. Thanks in advance.
YES YOU CAN....either order a new port from dealer or an aftermarket port on amazon and wire in. Its easy to swap.
Did help thank you sir
Great to hear!
Supper helpful!!! I have a 2020 Gmc and there isnt any videos like that yet.
Great to hear!
Ik, I wanna connect a 110v outlet to mines
Definitely did help out👍
Glad we could help!
How do you put the left one back in if it's out like shown on video?
It snaps in from behind. You need to take the other panels out, then use a tool to snap that panel in by pressing behind it.
How did you put the LEFT piece back in. if it pushes in. you would have to install it from inside the dash. How do you push it back out forward?
It snaps in from behind. You need to take the other panels out then use a tool to snap that panel in by pressing behind it.
If i was trying to get the one pannel that pushes in back in place would i need to open another panel beside it and push it from the inside?
Yes, it snaps in from behind. So you would open another one and then use a tool to snap that panel in by pressing behind it.
How do I reinstall the first accessory, the one that is pushed?
Please email info@wickedwarnings.com and we will be glad to answer your questions!
Thanks it help me
Great to hear!
The piece you have to push in, is there a way to get it clipped back into place without taking apart the dash?
It snaps in from behind. You need to take the other panels out, then use a tool to snap that panel in by pressing behind it.
How do you put the far left one back?
It snaps in from behind. You need to take the other panels OUT then use a tool to snap that panel in by pressing behind it.
The one on the left that snaps in the back I accidentally pushed in. How can I reset it?
It snaps in from behind. You need to take the other panels out then use a tool to snap that panel in by pressing behind it.
I just fixed mine in 2 minutes. Trick is to find the access point from underneath the drivers side. Get your phone camera in video mode with the flash on. Get up under the drivers side floor and look at your phone while recording. You can see the small access point. Reach your hand up in there and it easily pops back in
Could you upgrade to 110v outlet? I thought there was an additional switch to turn the outlet on and off with the trucks equipped with the outlet from the factory
Not sure, sorry
accidentally pushed the backward one in how do I get it back in place
It snaps in from behind. You need to take the other panels out then use a tool to snap that panel in by pressing behind it.
I’ve gone up and down on all the comments lol do you mind telling me what tool you used exactly because I’m going out of my mind trying to push that panel back in.
Thanks
👍
soo I've read your reply to 104 questions. and it seems that you need to pop out another panel, use a tool and snap the left panel in from the back? is this correct? lol jk jk. good video you saved me from a full disassemble.
LOL thanks for checking the comments and glad this helped!
I have to tell people how easy it is to pop the left panel back in. I just fixed mine in 2 minutes. Trick is to find the access point from underneath the drivers side. Get your phone camera in video mode with the flash on. Get up under the drivers side floor and look at your phone while you’re recording. You can see the small access point. Reach your hand up in there and it easily pops back in
0:33 on that blank panel, do you know how to put it back?
The right one snaps in from the front so you can just push it back into place. The left one snaps in from behind. You need to take the other panels out, then use a tool to snap that panel in by pressing behind it.
I just fixed mine in 2 minutes. Trick is to find the access point from underneath the drivers side. Get your phone camera in video mode with the flash on. Get up under the drivers side floor and look at your phone. You can see the small access point. Reach your hand up in there and it easily pops back in
Thank you!!!!!
You're welcome!