DIY Suitcase Solar Panel Build! Step By Step Build!
Vložit
- čas přidán 21. 05. 2024
- I build some suitcase solar panels for a viewer. #solar #solarpower #preparedness #renogy #offgridpower #ecoflow
Below are Amazon affiliate links, I earn a small commission but it doesn't cost you any extra.
Renogy 200 watt panels amzn.to/3VbBG15
Aluminum Angle Iron amzn.to/44WHFtJ
Telescoping rods amzn.to/4dFMKKO
Strap tie downs amzn.to/4bARiQX
Cable strap amzn.to/3UNlZMe
Larger 3.5 inch stainless hinges amzn.to/44QJrwA
C clamps amzn.to/44GpAjy
Rubber bumpers amzn.to/4axAcm0
EcoFlow power station used
On Amazon (apply $500 off on page coupon) amzn.to/3V9VmCf
EcoFlow website (use code 24EFRVKELLEY for a discount) us.ecoflow.com/products/delta...
Johnny's Weekends Suitcase Video • How to make Solar pane...
Our new merchandise: the-kelleys-country-life.mysh...
Our Patreon / tkcl
New review channel: / @thekelleysreviews
New podcast channel: / @thekelleysoffscript
This is our Amazon store with affiliate links to the products we use on the channel. It doesn't cost you anymore and it helps support the channel, THANKS!
amzn.to/3RO2z8n
View our other channel for outdoor related content such as fishing, boating and hunting! / @tkoutdoors
Paypal is the same email address below
For business inquires please contact us at kelleyscountry@gmail.com
The Kelley's Country Life LLC accepts no responsibility for you trying anything you see on our channel.
All links provided above may be affiliate links which earn us a small commission but don't cost you any extra.
I am a part 107 certified drone operator, any drone imagery you see is legal and my own.
Our address
6244 East Caps
PO Box 22
Lamont, FL 32336
I created 4 suitcases using (8) 100W panels. I did the same using the Prop Rods and nylon spacers. I used hinges with removeable pins. To keep them from folding when open, I used a third hinge on the back side flush with the top. When the suitcase is open I put the pin back in the hinge. To keep them closed I used a piece of strap from an old backpack and jean snaps. Also, I put rubber on the bottom edge to keep it from sliding when erected on brick or concrete.
Nice work!
This vdo is very helpful! It gave me a better idea of doing a portable panels to use on my barn. Hey… I saw the “I’m I a sellout?” vdo. I appreciate what you do, the work you put into it to help people like me. We are going into ‘hard times’… how to learn to help to survive will always do well. As far as the solar… I’m fearful of energy companies going up because of inflation, or terrorist attacking our grid or they (grid) are getting too old and I believe there will brown/black outs. We must prepare for IT WILL HAPPEN! I have learned so much watching your show… keep going, keep it up… You are ONE OF THE BEST! And thank you for reading and responding as you do, you have a faithful follower. God bless you! Ryan Guilbeau.
Great video. 🫠
Man, those turned out pretty dang good!! They’re going to work perfect for my situation. I appreciate you adding the “TKCL” tweaks to what was already a great idea. I’m impressed with the output of those Renogy panels too! Another excellent video Andrew!
Hope you enjoy them, although that means you'll be in an outage 😒
Love the solar content!!!! Take care Andrew.💪🏼🇺🇸
Thanks, you too!
Nice build and great pointers for other DIYers.
You seem to have a huge land in use. What are you growing?
Timber for agriculture reasons, firewood sales, pasture for future cows ect.
Very nice!
Good video but please get rid of the clamps with aluminum channel. Disassemble the hinges and add another pole. Also, Florida has a law that trumps all HOAs when it comes to solar panels. They cannot impede the homeowners in any way.
Sweet portable setup. Guessing it’s quite a bit cheaper than the premade ones. Nice job Andrew.
By several hundred
You're so on the mark. At this time. I wish I could afford most of that stuff but where we are dealing with car issues. Love you Andrew! See you this Sunday
Got to have priorities, a car is a must have for most people.
Great job, and love the simple design. It follows the KISS philosophy of design.
Glad you like it!
Hi, Andrew! Great video! You are helping soooo many people.
Glad you think so!
Cool beans! Thanks for the parts list and video!
You bet!
Anyway you can show us how to mount these on a roof? Trying to do an off grid shed. How long would it take to charge the max to full capacity?
I personally don't mount panels to a roof, too many issues associated with it. Those 4 panels in full sunlight could charge the max in a little over an hour.
This is exactly the situation I have.
Thanks for putting out this Video
👍
Glad it helped
Nice simple design. Performance looks great too. Be nice for power outage or even to take camping/to a cabin for a weekend. Thanks for the vid Andrew.
Agreed, thanks for watching.
Great job.
Thanks!
very useful video, thanks Andrew!
Thank you for watching!
Really nice setup, Andrew. I'm sure the owner will be very pleased. Fingers crossed, he doesn't need them much.
I hope he doesn't either, but this years storm predictions are not looking good.
@TKCL It's definitely been active in the southeast so far. I hope the predictions are wrong.
@@dougdavis4439 me too, I don't want anymore storms.
Nicely done! Two questions: Why not use a third extension leg in the middle instead of the bracing bar? Then you have no loose parts. And how do you keep the legs from folding out when carrying the suitcase around?
Because a bolt head would be on the outside of the frame where both would fold open together. The kegs rubber cap tucks unter the frame of the panels.
thats a very handy idea! that would work well with 4 smaller sized panels and stick them in your vehicle for camping or outing events you need power!
Agreed!
Drill a hole in the top of each panel and put a dowel or quick pin to hold them from collapsing in. Excellent video.
Great idea
You can also put a dowel in the end of the leg where the bolt goes into it for more sturdiness.
Fantastic little build there! What would the total cost be if we were to go on Amazon and buy the components?
About $450 per set.
@@TKCL thanks
Deborah & Clark:
Andrew on the handle, I would recommend bolt and nut that way the handles won't have a change to become loose after a lot of use. Great Video as Always...
Thank you for watching
Have you had an issue charging your delta pro with both solar and AC?
The new DP3 model or another model?
1st Gen Delta Pro, I let it run all the way down last both until they were both to 20% and then they seemed to start charging from AC and solar, I am monitoring them today and seem to have self corrected(?)
Also, is it okay to leave the line power monitors connected at all times?
I’m probably going to do this with a couple of 100w renogy panels
I love my 100 panels, they produce very well.
I have lot's of experience with expandable rods/poles like these. My golf ball retrieval tool. LOL
some of the velcro straps will feed throough themselves so you dont loose them(ie cord straps) also add a couple of small wheels to one of the panel sides , all they have to stick down a couple of inches and you can just roll them out rather than carry them. stick the power station on a cheap dolly and roll it too, or put them both on a better / wider dolly!
So you could put a sliding door latch on back of the panel . Stand it up slide it over and latch .. just a thought ..
I see what you mean 🤔
For the angle bracing my first thought was riv nuts or j nuts on thw frame maybe even in an existing hole and a thumb screw. Would be much smaller than rhe clamps. Could also use riv nuts on the inside where the hinges are if yoy wanted to do a 3rd leg in the middle. Use a stud and some permant loctite or a jam nut on the "backside" of the rivnut. Sorry couldnt think of a better way to explain that thought.
Now, here's Aunt's advice: there are silicone bag handles used on grocery bags to protect your fingers , these would be ideal to put on the panels for carrying.
I'll have to look into that.
That's awesome idea.
Just wondering, Couldn't you use sliding latches that you use on closet doors or bathrooms? The old style ones are like the gates. Or on your storm shelter. Latche Would it make a lot Easier. saying?
Great idea! If I make more I will try something like that.
350 watt minomum for each sode wpuld make it worth our time.
KB solar makes 450 watt panels out of North Carolina MODULE-KBS450-MONO-BF that would be great they cost about 225 a piece if you buy them in groups of 10 panels at a time.
That would start getting very large and heavy. Not what I would call a portable setup. I don't think I'd want any more weight than the two 200 watt panels.
@@TKCL Yeah you would almost need a dedicated dolly just for the panels. at 51lbs each.
@@TKCL czcams.com/video/QH0bzpD-dG4/video.htmlsi=ozZw0Z6ITfNDUsb3
Good day to all, peace.
Good evening
Put a single leg in the center and then you won’t need the clamps and angle iron.
Problem is the bolt head sticking out between the panels.
good build, enjoyed the simplicity. I was thinking the same about 3 rd leg. would a
carriage bolt be thin enough between? keep up the good work
@@TKCL go from the top of the frame. You have that extendable pole so going to the top of the frame should be an issue. Also, you could shim between the hinge and the frame to get you a little more standoff to fit a carriage bolt in case you still wanted the mount the pole to the hinge side of the frame. Just a couple ideas.
Lol I remember when you totally poo pooed solar because you had generators and power was so cheap in North Florida. It wouldn't be worth it. 135k followers later it is content content content.. Love watching your stuff. Be here since Daniels shout out.
I give the people what they want.. Thanks for watching!
A piano hinge would work well for this
Yes it would
Are you having any trouble with any of the ECOFLOW DELTA, PRO OR ULTRAS? I just purchased a EF DELTA MAX for my barn. Just nervous about them being good the long haul.
My oldest Ecoflow unit is 3 years old and still kicking. I actually use it often for little jobs. My Ultra has also been used several times recently due to power outages. So far so good, they are known to make some of the best products in the industry. With that said, I suppose there's always risk of something not working. Same goes for generators, I've got two down right now.
Wouldn't the adjustable legs mounted on the inside of the panels make more sense? This way it holds the panels correctly without the added angle iron (brace)
Bingo
Yes but the bolt heads sticking out the side would interfere with them opening and making contact with each other.
@@TKCL you could drill a hole in the opposite rail for the bolt head to go into.
Would a 3rd leg work?
Yes but the bolt head would interfere with the two panels opening and touching each other.
@TKCL yeahh, I see that now. Definitely a cool build.
Total build price?
If you catch the panels on sale right now your talking about $900 for both sets at 800 watts. That's almost half what a quality set of fold up panels cost from the big name brands. However those fold up panels are more compact and transport better.
How much yo build me a small system???? I got money 💰 well some money 💰 lol
You got my number, sadly the shipping is going to be outrageous.
Lol @Cash 😆🤣, no shipping 😮
@@TKCL hmmm 🤔 I wonder if they will allow as a carry on 🤔
@@5150cash sure 😂
The panels look good. The Hurricane season forecast though is nonsense. They forecast the worst season ever every year and yes one year they will be correct but they have not been correct for the last 10 to 15 years.
Lol I don't disagree with you, but it's still best to be prepared. We've already been experiencing crazy storms and outages this year.
@@TKCL I agree, we always prepare with extra food, generators, water etc. Even one storm can be bad if it hits you the wrong way. I just get tired of hearing the long term predictions from the clowns at NOAA. They can't tell me where a storm is going a few days out but they expect me to believe their prediction for the next 6 months. It can go both ways. We could have an extremely active season but no storms hit land. Or we could have a very low activity year and 2 or 3 major impacts. We just don't know 6 months out.
UNO
Don’t Think so, buddy I think I was first lol
@@robertmalis4493 ?????
@5150cash I have to laugh when you type UNO. Of all the channels in different languages - your comment is the only one that asks afterward "Translate to English" 😆🤣🤣
@@PJ-uv9fr lmfao 😆
@@PJ-uv9fr what is up with that? 🤷🏽♂️
Forget the video. For the first time. It's based on the manufacturer's information. You have to run your house or accommodation. Everything else doesn't matter!!! YOU must live and survive.
www.youtube.com/@TKCL
Stop selling a “patent” for extreme situations. Not everyone has the money and the tools.
Sorry. I like your channel, but this can lead to sacrifices. Especially in a tornado situation.
Not meaning to be argumentative, but exactly what's your beef? All Andrew is promoting is an easy panel setup build for those who ARE capable, but may not have the greatest of engineering skills to decipher it for themselves. I think it's commendable for him to always be sharing his innovative creations. I don't have money for this type of setup, but if I did...I could build it by watching his videos!
This is exactly the situation I have.
Thanks for putting out this Video
👍
Glad it helped