I appreciate the information in your video since this will be my next service on my B7100. Well done! And i would have loved to see what the cleaned filter looked like before reinstalling.
I have a B7100D with a B748B snowcaster. The front lift is no longer lifting, I think due to fluid loss. Mine has an extension on the hydraulic fill port that has a hydraulic hose that goes to the snowcaster lift cylinder. Would this change the capacity of hydraulic fluid for the tractor and make the dipstick reading invalid?
Video was a great help. Changed my fluids just like you showed. Appreciate it. HOWEVER, now my loader won't lift? Syphon screen got cleaned. Hydraulic pump seems to be working but when I removed the hose from the pump to the control levers to check for flow, it was just sputtering (engine running). Not sure why its not getting fluid? Appreciate any advice. Thanks a bunch
@@bucksgarage1 Thanks for responding. Fluid level is correct. Do you know how the pump system gets its fluid? The pump has suction through the in line (really its the return line I think), but the the out line is just sputtering. So I'm wondering of the line that is the actual source of fluid is blocked?? Not sure where that line is. Really appreciate your ideas, thanks again.
Nice vid. On my B7200, there are two strainers, the other on the opposite side. Is there only one strainer on the B7100? I also regret not replacing the Aluminum washers on the back axle bolts, as I now have a leak on one side.
Thank You. I have a 7100 that isn't lifting as well as it used too and the steering is difficult now. I pulled out the hydraulic dipstick and light brown foamy fluid started coming out. Suggestions?
Thinking about getting a b7200, are these good tractors for hauling wood, clearing brush and debri , plowing snow for a yard little over an acre.just wondering about longevity and effectiveness or spend a little more and get a jd 855 or something.
I’ve got an old B7100 that doesn’t have a filter and it far as I know only has 1 screen. And I can’t find the 3rd bolt. I removed 2 bolts. On with a screen. The other on had no screen. They were right across from each other.
Good job very clean explaining
I appreciate the information in your video since this will be my next service on my B7100. Well done! And i would have loved to see what the cleaned filter looked like before reinstalling.
Great job young man thank you for your videos.
Great video. no waste of time 10/10
Thank you.
Excellent video
excellent well described
Its a real nice video bout you dint show the fuller plug for the rear axel. Can you add that or. Post it please
I have a B7100D with a B748B snowcaster. The front lift is no longer lifting, I think due to fluid loss. Mine has an extension on the hydraulic fill port that has a hydraulic hose that goes to the snowcaster lift cylinder. Would this change the capacity of hydraulic fluid for the tractor and make the dipstick reading invalid?
Video was a great help. Changed my fluids just like you showed. Appreciate it. HOWEVER, now my loader won't lift? Syphon screen got cleaned. Hydraulic pump seems to be working but when I removed the hose from the pump to the control levers to check for flow, it was just sputtering (engine running). Not sure why its not getting fluid? Appreciate any advice. Thanks a bunch
Make sure you have the right level of hydraulic fluid? Maybe pump cavitation?
@@bucksgarage1 Thanks for responding. Fluid level is correct. Do you know how the pump system gets its fluid? The pump has suction through the in line (really its the return line I think), but the the out line is just sputtering. So I'm wondering of the line that is the actual source of fluid is blocked?? Not sure where that line is. Really appreciate your ideas, thanks again.
Nice vid. On my B7200, there are two strainers, the other on the opposite side. Is there only one strainer on the B7100? I also regret not replacing the Aluminum washers on the back axle bolts, as I now have a leak on one side.
Unfortunately I can't go look at the B We sold it last week and got a newer Massey Fergason with powersteering.
Good video. Where did you get your lift you elevate your tractor ? I would like to get one.
www.twinbusch.com/index.php?cPath=4
Thank You. I have a 7100 that isn't lifting as well as it used too and the steering is difficult now. I pulled out the hydraulic dipstick and light brown foamy fluid started coming out. Suggestions?
I would start with fresh fluid and filter. I can make a difference
Thinking about getting a b7200, are these good tractors for hauling wood, clearing brush and debri , plowing snow for a yard little over an acre.just wondering about longevity and effectiveness or spend a little more and get a jd 855 or something.
For as small as they are they are very capable. Kubota makes reliable equipment
I’ve got an old B7100 that doesn’t have a filter and it far as I know only has 1 screen. And I can’t find the 3rd bolt. I removed 2 bolts. On with a screen. The other on had no screen. They were right across from each other.
I have a B7100 with no filter for hydro that I can see,not familiar ,would like to onow about screen clean and fill method
Did you have to get the O-Rings from a Kubota dealer?
Thats where i got them. I had ones in an o ring kit that were really close but just not right.
Where did you get the loader for your Kubota?
?? It came with it when I bought it used.
Hello buck I have the exact same tractor could you give me the codes of the filters u used please. Thanks
amzn.to/3YLH9ex
amzn.to/3HZ0O4T
amzn.to/3jpeQ5w
www.ebay.com/itm/324059417498?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=SJGP8CQdSku&sssrc=2349624&ssuid=jJU6a8uDTcm&var=&widget_ver=artemis&media=COPY
That's the fuel filter, hydro filter, oil filter, and air filter.
What year is it?
1990
Can you send a pic on how the front end loader is plumb to the tractor. Thanks
@@paulraupjr7717 email address? I probably won't get to it till tomorrow