The only photo I took is the link below, but I hope it helps. blogfiles.pstatic.net/MjAyMzEwMDZfMTUw/MDAxNjk2NTUxNDM4MjM0.QCOA-lBFdGdnFkh-y4zEUTbzHsbSTcNhjpTiSjQFBz8g.enoW6c2Jhc02vNfMdE-73wM9KncuIvERVrseYakshJYg.PNG.an2gen3/RAW_S1.png
You can build with the basic cable provided when purchasing a PSU. I used a custom power cable to make it look neat. If you organize the basic cable with a cable tie, it will look neat.
I am using the same fan, case, and cpu cooler (as well as a 2800RPM case fan) But my 7700X gets above 90C @ 110 Watts during cinebench mauti core according to CoreTemp. Could this be a thermal paste issue? I made sure the mounting pressure is fine but the only differences are my cable management and the thermal paste.
The Ryzen5/7 series core temperature control using only one CCD is more difficult than the Ryzen9 series using two CCDs. (I think this is because the heat exchange area between CPU and CPU cooler is 1/2) Appropriate Curve Optimizer settings and PPT limitations are required.
I bought it from users who make and sell it themselves in Korea. I think it would be quick to find custom cable manufacturers or users who manufacture and sell them in your country.
I have a chunky PowerColor 7900XT I'm hoping to somehow cram in there. Got a 5800X3D on sale too. Got a roomy 600T that's a little too spacious, even for this build.
Is there any chance that Hellhound 7900XT could be made to fit in this case, Without modifying the external panel or restricting airflow to the gpu too much?
I don't think I can give you a definite answer because I haven't dealt with the 7900XT a lot. However, I think I can get enough effect if I try to improve the air flow.
@@DalraeMyo I like the case. I'm just having trouble with finding ones that support good air coolers. But also, support non reference GPUs with larger coolers.
I forgot one crucial detail. Part of my search criterium includes: No tempered glass... A well ventilated panel can give you well enough of a glimpse inside. Also- AIRFLOW!
This PC case supports a three-slot graphics card, so it looks like RTX 4090 can be installed. However, since the cooling performance of the PC case is not good, it would be better to consider installing a high-performance graphics card.
I am amazed at how well a 7950X can be cooled! Gives me hope for 7800X3D!
nice, love the footprint of it
I want to put palit 4070ti gamerock classic (329mm) in this case. Fit?
Case is 50/50, expensive and hot
Impressive!
😮🤩😮
do you have a close up img for the area between the PSU cable and the top fan? I'm wondering how effective is the use of custom cables for thermals
The only photo I took is the link below, but I hope it helps.
blogfiles.pstatic.net/MjAyMzEwMDZfMTUw/MDAxNjk2NTUxNDM4MjM0.QCOA-lBFdGdnFkh-y4zEUTbzHsbSTcNhjpTiSjQFBz8g.enoW6c2Jhc02vNfMdE-73wM9KncuIvERVrseYakshJYg.PNG.an2gen3/RAW_S1.png
Hey dude nice build! Where did you get the case can’t seem to find it anywhere 😢
I bought it secondhand from a community user.
As far as I know, LOUQE products can be purchased on the LOUQE website.
@@DalraeMyo I just bought this case recently and I got mine from Amazon. It was only $161 USD.
오.. 783d 에코모드+커옵 20으로 해놓고
케이스가 xproto-L이라 먼지걱정이 많은데
얘도 이쁘네요.. 케갈할까..
오픈형 케이스에 비하면 온도가 불만족스러울 수도 있습니다.
Triple nie 😀
I wonder if you can use the original CPU cooler mounts with that CPU frame. That's my plan to try, anyway...
There is no problem with mounting the CPU cooler even if the AM5 socket frame is not used.
I used the AM5 socket frame simply because it looked cool.
@@DalraeMyo Nice! That build was crazy fun to watch. My Raw S1 was delivered a few days ago, so I'll be playing around with it soon.
Question about the music for this clip, are you able to monetize this video or the music makes that impossible?
I only use free licensed music from CZcams studios. There has never been a separate warning for revenue generation.
Is it a good idea to do a build in this case with regular psu cables? If so, can u recommend one with softer cables?
You can build with the basic cable provided when purchasing a PSU. I used a custom power cable to make it look neat. If you organize the basic cable with a cable tie, it will look neat.
How well do those 5.8G antennas work for wifi?? I've never seen someone use those for a PC
I'm using Bluetooth audio equipment to connect. Wireless LANs can be used, but reception sensitivity seems to be poor compared to stick-type antennas.
I am using the same fan, case, and cpu cooler (as well as a 2800RPM case fan) But my 7700X gets above 90C @ 110 Watts during cinebench mauti core according to CoreTemp. Could this be a thermal paste issue? I made sure the mounting pressure is fine but the only differences are my cable management and the thermal paste.
The Ryzen5/7 series core temperature control using only one CCD is more difficult than the Ryzen9 series using two CCDs.
(I think this is because the heat exchange area between CPU and CPU cooler is 1/2)
Appropriate Curve Optimizer settings and PPT limitations are required.
Are those silicone PSU cables? Where could I get some?
I bought it from users who make and sell it themselves in Korea.
I think it would be quick to find custom cable manufacturers or users who manufacture and sell them in your country.
Hi is the 5.8G that you installed is for your wifi? is it good?
Both Wi-Fi and Bluetooth are available, and I'm using it because of its small size. Show sufficient reception at close range.
@@DalraeMyo wow that's nice! Cleaner look for my sff build, will definitely try it out.
Funny I’ve got almost the exact same setup just 13600k and 7800xt
I have a chunky PowerColor 7900XT I'm hoping to somehow cram in there. Got a 5800X3D on sale too. Got a roomy 600T that's a little too spacious, even for this build.
GPU Max Size:: 320mm. my 3090 Strix is 319mm, think it will fit?
It meets the mountable size, but is not recommended to install if you consider the heat emitted by the RTX 3090.
Is there any chance that Hellhound 7900XT could be made to fit in this case, Without modifying the external panel or restricting airflow to the gpu too much?
I don't think I can give you a definite answer because I haven't dealt with the 7900XT a lot. However, I think I can get enough effect if I try to improve the air flow.
@@DalraeMyo I like the case. I'm just having trouble with finding ones that support good air coolers. But also, support non reference GPUs with larger coolers.
I forgot one crucial detail. Part of my search criterium includes: No tempered glass... A well ventilated panel can give you well enough of a glimpse inside. Also- AIRFLOW!
7950을 공냉돌려도 되는구나..
안녕하세요! 항상 궁금했던건데요 드라이버는 어디 껀가요 품번이라도 알고 싶습니다.
쿠팡에서 파는 만원짜리 드라이버입니다. 알리에선 6천원정도에 판매되네요.
ZK30 컴퓨터 수리 키트
리뷰 잘 봤습니다. 미사용 한 대 가지고 있습니다. 필요하신 분은 연락을 ^^;
Could this fit an RTX 4090?
This PC case supports a three-slot graphics card, so it looks like RTX 4090 can be installed. However, since the cooling performance of the PC case is not good, it would be better to consider installing a high-performance graphics card.
안녕하세요 저 작은 안테나도 쓸만하려나요?
저는 블루투스 스피커 연결해서 쓰는데 문제 인식 잘 됩니다. 부피가 작다보니 부담없이 쓰기 좋은거 같습니다.
얘는 외장라디 수냉을 해야 됨
ESL uses these for csgo, but they put them all sideways ¯\_(ツ)_/¯
I want to put palit 4070ti gamerock classic (329mm) in this case. Fit?