2019 UPDATE: So it's been two years, and the antenna is still just as stuck on as it was on day one! No, I didn't expect this to last this long but I was pleasantly surprised. The radio (along with digital / DAB) still works perfectly fine. Hope this helps anyone watching this video now! And if you want, subscribe or check out my other videos :) See ya
Thanks for that. I am thinking of fitting on to the Caravan as the normal antenna gets pushed around to much when I put the cover on ...Hope my idea works
@@monkeyzoff548 you still have to detach your whole other antenna and screw this one on just to test. Was just wondering if he meant something quicker. But for anyone wondering, they have shit connection. I don't really care since I never use radio.
Sick thanks mate. My 08 lancer antenna practically melted from the sun. So I needed a new fix for it. The radio still works perfectly fine. I just needed a new cover or antenna thing. So this looks pretty good and easy to do. Cheers!
I recently installed one from ebay like this one onto a 2008 Honda Cr-v USA market. it was tricky i had to peel down the headliner, loosen the nut to the existing base , connected the wire then installed it carefully with the base inside it slid it around so its under the base then tightened the nut to the base i did not use the supplied tape i used sealant. and i sprayed the antenna element with wd40 to assure long life. here in the northeast use so it can survive the extreme cold temps, snow, and summer heat. as the shark fin installations are best suited for vehicles with a rear hatch, or tailgate depending which shark fin you get. as some bases it has to be loosened and lifted before the shark fin can be installed. as you have to get the right shark fin depending on some vehicles and how big the antenna base is. which can combine satellite radio or navigation.
I used gorilla glue to fix mines that came off while knocking off snow. I used a towel and sponge to absorb all of the snow/water. Works like a charm. The only thing with my car the shark fin is stand alone the antenna part is installed to the hood of the car so no wiring was needed.
yours is better than mine. more 3M adhesive and the soldering is thicker, not fair! it came from China inless than 10 days, free shipping! crazy fast. in plastic, no box. somehow it survived.
@@leighanneh3559 goo gun? Do you mean hairdryer. I just bought one and im about to install it. Just wondering how do I remove it if needs be in the future?
Hi Mitch. From the other side of the Pond - Vince Smith from Dumfries, Scotland. I appreciated your video. However, I had to find out the hard way, that if you have a car (in my case a 2010 Citroen C4 Grand Picasso VTR) - that has a longer base than other cars, you have to break out the white crescent part at the front of of the shark fin case, because otherwise it will not be able to fit over the base,=. The original cavity is too short for these longer bases. I don't remember you mentioning this possibility, but I worked it out after some trial and error. Ta just the same. Vince
The adhesive tape is not 3M, it's "M33", which is a cheap Chinese brand (convenient how the chose the number "3" & letter "M" for their product). Anyway, I don't expect it will adhere very long especially in the heat & humidity of northern NT, but good luck!
Anybody who has ever installed anything with 3M tape knows it aint coming off!! No hair dryer needed!! I will say I don't understand why you wouldn't screw the antenna on 1st and test it. I would even drive around and test before I permanently stuck it on because once you stick that badboy on that's it.
Can you help me I just want to know where you got this as I bough one of eBay and it’s too small , basically I want the same one as it just goes straight over what holds the original antenna , I’d appreciate it if you have time
It is so tiny,. what is inside that makes it as good as a long one? doesn;t height and length [ surface area] have some benefit, if not, why don't all manufacturers fit them new.
I had to personally since the roof of my Corolla Ts is not convexed it's flat. Some clear sealant works but you will want to cut a real small nozzle and have good clean wiping cloths to tidy the excess.
Juan Camacho ebay! It's a generic one, and the listing has since been removed. It was about $10 I think.. super cheap. Look up your car and shark fin, it should come up!
Top tip...open box, remove item , turn camera on and start recording....don't need to see you and every other reviewers, one handed box opening skills or the lack of...👌
I have a Sony radio (after market) for my 95 Honda Civic coupe. It has a regular antenna not an automatic one. Will this work if I used it to get better reception? My old fashioned antenna is a little bent and my radio stations don't stay in tune and are fuzzy. Thanks!
People don't seem to realize how strong 3m acrylic foam adhesive is. Installed in the right way you won't be able to get the antenna of with your hands.
i saw another guy installing one of these, no prep what so ever, it was like he was sitting in his kitchen going, "i´m bored, i´m gonna make a youtube video" he must have just taken his phone and the antenna on impulse and just started shooting, he takes a rag and "cleans" the aria, dude could have used sand paper just the same, by the sound of it, i cringed when i watched/heard it. slaps it on, no heat prep, fucks it all up in the end and has to remove and modify. aaaa some people :-D
Johnathan C ¡Hola! This is exactly the same as the one that I got for my car. m.ebay.com/itm/Radio-Shark-Fin-Antenna-for-Mitsubishi-LANCER-EX-ASX-GT-Signal-Shark-Fin-Antenna-/122725288135?hash=item1c92ff48c7%3Ag%3AI3AAAOSw-jhUCrgk&_trkparms=pageci%253Af0674c46-acbc-11e7-8178-74dbd180b24e%257Cparentrq%253Affde553115e0ab6af713688efffd8086%257Ciid%253A4 You choose the colour on checkout :)
Hey! So the one that I got in this video has since been taken down from eBay. But the one in the link below looks like it is the exact same one. You just need to let the seller know which colour you want. Have a good day! :) m.ebay.com.au/itm/Car-Blank-Radio-Shark-Fin-Antenna-Signal-AERIAL-For-Mitsubishi-LANCER-EX-/191479857790?hash=item2c9516c27e%3Ag%3AntQAAOSwGvhT~GBv&_trkparms=pageci%253A34d7e561-28e7-11e7-9799-74dbd180b048%257Cparentrq%253A9fe015af15b0a6a4a6a82660fff20386%257Ciid%253A20
2019 UPDATE: So it's been two years, and the antenna is still just as stuck on as it was on day one! No, I didn't expect this to last this long but I was pleasantly surprised. The radio (along with digital / DAB) still works perfectly fine. Hope this helps anyone watching this video now!
And if you want, subscribe or check out my other videos :) See ya
Thank you!!
Thanks for that. I am thinking of fitting on to the Caravan as the normal antenna gets pushed around to much when I put the cover on ...Hope my idea works
Where do I buy one of these!!!!
Thanks for doing an update.... that's helpful.
Mitch Drescher where did you get it from or what website?
Pro tip, test if it works before you stick it on to your car ;)
how do you test that?
@@jaymills6691bro ??? Are you serious asking this question? 🤣 you just attach the atenna and test the radio before sticking it onto the car 😭
@@monkeyzoff548 you still have to detach your whole other antenna and screw this one on just to test. Was just wondering if he meant something quicker.
But for anyone wondering, they have shit connection. I don't really care since I never use radio.
except from the misleading thumbnail, the color of your car, it really helped me, I had no idea it was this simple!
thank you man!
Pretty sure the thumbnail is a focus rs
@@user-pi4cr1fh9j Probably, I last seen this 4 years ago…
Omg!! Your intro with the doorbell had my dogs running to the door!! 😂😂😂
This is the exact one I got for Christmas and I’m so excited! Thanks, was pleased to find a video with the same one I received. Thanks again.
Do you know where it come from
Sick thanks mate. My 08 lancer antenna practically melted from the sun. So I needed a new fix for it. The radio still works perfectly fine. I just needed a new cover or antenna thing. So this looks pretty good and easy to do. Cheers!
daniel richardson no worries!
Got one for my fiat doing this today your video was helpful thank you
I recently installed one from ebay like this one onto a 2008 Honda Cr-v USA market. it was tricky i had to peel down the headliner, loosen the nut to the existing base , connected the wire then installed it carefully with the base inside it slid it around so its under the base then tightened the nut to the base i did not use the supplied tape i used sealant. and i sprayed the antenna element with wd40 to assure long life. here in the northeast use so it can survive the extreme cold temps, snow, and summer heat. as the shark fin installations are best suited for vehicles with a rear hatch, or tailgate depending which shark fin you get. as some bases it has to be loosened and lifted before the shark fin can be installed. as you have to get the right shark fin depending on some vehicles and how big the antenna base is. which can combine satellite radio or navigation.
I used gorilla glue to fix mines that came off while knocking off snow. I used a towel and sponge to absorb all of the snow/water. Works like a charm. The only thing with my car the shark fin is stand alone the antenna part is installed to the hood of the car so no wiring was needed.
Waiting for my shark fin getting delivered today so thought I'd have a look and see how it's done, now I know, many thanks 👍
3:00 “deez nuts” haha
got em
Ey, thanks so much man. I need to change my lancers aerial to a shark fin and this is a very easy to follow guide 👌
yours is better than mine. more 3M adhesive and the soldering is thicker, not fair! it came from China inless than 10 days, free shipping! crazy fast. in plastic, no box. somehow it survived.
Now you need to show us how to remove the shark fin if stops working. A lot harder I would say, especially if you don't want to lose any paint.
i used goo gone and a little rubber squeegee
@@leighanneh3559 goo gun? Do you mean hairdryer. I just bought one and im about to install it. Just wondering how do I remove it if needs be in the future?
Thanks mate! Your video helped me decide to make the switch.
Hi Mitch. From the other side of the Pond - Vince Smith from Dumfries, Scotland. I appreciated your video. However, I had to find out the hard way, that if you have a car (in my case a 2010 Citroen C4 Grand Picasso VTR) - that has a longer base than other cars, you have to break out the white crescent part at the front of of the shark fin case, because otherwise it will not be able to fit over the base,=. The original cavity is too short for these longer bases. I don't remember you mentioning this possibility, but I worked it out after some trial and error. Ta just the same. Vince
Quick tip. put sticker on to antenna base then heat up!
john Baldock looking back now, that seems like a much better way of doing it! I didn't really think the entire process through too much
Dude, we all learn things later! :)
Put mine on a lil crooked but looks good enough thanks bro
i just loved the part at 1 min 30 sec.. i too used to do that.. nice video nice car :)
I have a 2016 Mazda 3, the stock antenna ruins the look of it imo.
Definitely going to put a fin on now that I know its this easy.
Literally what I’m gonna do
Pro tip, test your radio before sticking the cover to your car.
Thanks a lot. Nice video...
nice car...
Syukri Myvi thank you!
The adhesive tape is not 3M, it's "M33", which is a cheap Chinese brand (convenient how the chose the number "3" & letter "M" for their product). Anyway, I don't expect it will adhere very long especially in the heat & humidity of northern NT, but good luck!
corlettable still on there well!
Which double sided tape would you suggest?
wow thats cool bro,love it!!!
Great vid👌
Ashish Jangir thanks man. Feel free to check out my other videos 👍
Where did you get yours from? great help though
Or test the antenna BEFORE you adhere it. Great video gonna be doing one myself soon
Hey man , what characteristics i need to look for the antenna , i dont want taxi cars blocking my radio
Anybody who has ever installed anything with 3M tape knows it aint coming off!! No hair dryer needed!! I will say I don't understand why you wouldn't screw the antenna on 1st and test it. I would even drive around and test before I permanently stuck it on because once you stick that badboy on that's it.
Just installed mine this morning and the back keeps lifting off :-( I don't think the hairdryer has anything on south Texas heat in USA.
How do you make sure it's straight? If it's crooked it would make me nuts.
Where can I get an exact one like this?
Have you got a link on where to buy in Australia? I cannot seem to find one that comes with the adhesive 3m tape - need a white one... Thanks
On my lancer it’s doesn’t sit flush like it’s uneven because it kinda rolls on the roof where the antenna is at any suggestions please and thank you.
Good car :-)
I might do this
My 2013 Jetta has a flat base antenna, will a shark fin work with it?
Can you help me I just want to know where you got this as I bough one of eBay and it’s too small , basically I want the same one as it just goes straight over what holds the original antenna , I’d appreciate it if you have time
Is the seal waterproof enough and strong enough to handle going through a carwash?
Handle at own risk
I'm reading up on these and seeing very mixed reviews ranging from they're brilliant to them being awful..
*_Will it work properly on any with same procedure?_*
It is so tiny,. what is inside that makes it as good as a long one? doesn;t height and length [ surface area] have some benefit, if not, why don't all manufacturers fit them new.
Dunno man. I don't make cars. Works exactly the same as the original, never had an issue.
how good is the radio reception with the new antenna comparing with the OEM one?
I haven't noticed any difference at all!
That was something that was holding me to get one like that but with your review I'll definitely get one!!
Go for it! It makes a big difference in how your car looks. Have a good day!
Mitch Drescher I'll do it thanks bro!!
is this FM or DAB+ antena ? It looks like DAB but maybe I'm wrong.
Works fine on both for me!
@@MitchDrescher BTW nice weels !
i see that there is a slight difference in the white hue of the shark fin antenna and the body paint of your car?
Shani Gan good eye! Yes, there is a very slight difference. Only slight though.
What if u don’t have a antenna?
Work for BMW e87 ???
dont you know how to do it on new beetle 1999?
Does anyone put silicone around it to prevent water from gettin in there?
I had to personally since the roof of my Corolla Ts is not convexed it's flat. Some clear sealant works but you will want to cut a real small nozzle and have good clean wiping cloths to tidy the excess.
Navigation works with this antenne?
Mine arrived with no tape after waiting 3 months for it to arrive 😢
Hello i just wondering if this work on Dab+ radio?
Jayson Bartolo hey Jayson! Yes, I can confirm that my DAB+ still works fine :) although I don't use it, ever.
you actually can pickup radio signal without it....
Where did you buy this?
Yo bro where can I buy one from pls?
What about the reception for DAB??
Andy Fowler didn’t change at all. Still works just as well as it did before!
Hey , why did you remove that Mitsubishi logo from the rear of the car ??
I just thought it looked better!
But I think it looked better with Mitsubishi logo , but no problem it's your choice bruh :)
Where did you get that Shark Fin Antenna?
Juan Camacho ebay! It's a generic one, and the listing has since been removed. It was about $10 I think.. super cheap. Look up your car and shark fin, it should come up!
Appreciated thanks Mitch!
Hello AliExpress: car antenna
Can't understand why you'd ask.... everything is of eBay
Change heading !!!!!!!!!! This does not apply to shaft type antenna like on my 67 Bonneville >>>>>>
Top tip...open box, remove item , turn camera on and start recording....don't need to see you and every other reviewers, one handed box opening skills or the lack of...👌
Thanks!
Miaow
Can u send me the link to buy this antenna?
Here Is The Link To Order Your Preference Mixed Gradient Color Shark Fin Antennas -etsy.me/34f2rHZ
Should of tested out the radio first lol
Rali272 sometimes I don't think. This was one of those times. But I will think of what you said next time I'm Installing an aerial on my car 😁
Although this video is years old I'd have covered up your address mate.
Great! Looks like even an idiot like me could do that 😄
I have a Sony radio (after market) for my 95 Honda Civic coupe. It has a regular antenna not an automatic one. Will this work if I used it to get better reception? My old fashioned antenna is a little bent and my radio stations don't stay in tune and are fuzzy. Thanks!
It'd probably end up being about the same! if not a tiny bit better
thanks
If you use an auto machine car wash, has the shark fin stay on, many people complain that they fall off.
Anti clockwise. Lol never heard that before.
Big bear welding LLC You’ve never heard anybody say anti clockwise, ever, In your whole life?
People don't seem to realize how strong 3m acrylic foam adhesive is. Installed in the right way you won't be able to get the antenna of with your hands.
That's right! If it's real 3M and the surface is clean, it should stick for good!
i saw another guy installing one of these, no prep what so ever, it was like he was sitting in his kitchen going, "i´m bored, i´m gonna make a youtube video" he must have just taken his phone and the antenna on impulse and just started shooting, he takes a rag and "cleans" the aria, dude could have used sand paper just the same, by the sound of it, i cringed when i watched/heard it. slaps it on, no heat prep, fucks it all up in the end and has to remove and modify. aaaa some people :-D
I think I was seeing M3...
Where to buy that shark fin antenna?
Johnathan C ¡Hola! This is exactly the same as the one that I got for my car.
m.ebay.com/itm/Radio-Shark-Fin-Antenna-for-Mitsubishi-LANCER-EX-ASX-GT-Signal-Shark-Fin-Antenna-/122725288135?hash=item1c92ff48c7%3Ag%3AI3AAAOSw-jhUCrgk&_trkparms=pageci%253Af0674c46-acbc-11e7-8178-74dbd180b24e%257Cparentrq%253Affde553115e0ab6af713688efffd8086%257Ciid%253A4
You choose the colour on checkout :)
Wireless ba yan
i wanted to see you drilling a hole in your roof?
hey dude, can u share ebay link this antenna
Hey! So the one that I got in this video has since been taken down from eBay. But the one in the link below looks like it is the exact same one. You just need to let the seller know which colour you want. Have a good day! :)
m.ebay.com.au/itm/Car-Blank-Radio-Shark-Fin-Antenna-Signal-AERIAL-For-Mitsubishi-LANCER-EX-/191479857790?hash=item2c9516c27e%3Ag%3AntQAAOSwGvhT~GBv&_trkparms=pageci%253A34d7e561-28e7-11e7-9799-74dbd180b048%257Cparentrq%253A9fe015af15b0a6a4a6a82660fff20386%257Ciid%253A20
اي
Deez nuts
2:58
Link to the shark fin antenna ?
Here Is The Link To Order Your Preference Mixed Gradient Color Shark Fin Antennas -etsy.me/34f2rHZ
how you gonna make a video and not give a link man?
DAB?
Most of these cheap antennas don't work with DAB only AM FM.
This one works just fine!
aliexpress bros
Turned off after you kept slamming the box down for no reason. Grow up
Thanks!
DUDE DONT BE MEAN BRO
A complete waist of time, I thought it was a step by step installation, take this video down, Please
Upon careful consideration, I've decided to completely ignore you
@MrF This video is a waste of time for you as you should be viewing How to spell videos 🤣
Does it work with dab stations?