Just tried this (boiling water) on suction cups on shower grab bars that wouldn't stick anymore...and so far, it's working!! Thank you very much for sharing this!
Holy shit! I tried the boiling water method and it works! I'm sentimental when it comes to certain things. I've had my car mount since 2014 and didn't want to throw away the memories associated with it. Thank you so much! I appreciate you!
Used a heat gun, high setting, only for a few seconds (pulled cup away as soon as it started to smoke lol) and IT WORKED! Thank you. Suction cup for transponder on windshield.
Thanks a lot for this video. It's amazing all the helpful things I can find on CZcams. Things that you would think would never be there or who would make a video about this or that and sure enough when I go to look it up..... there it is, someone made a video about just what I was looking for. I've saved so much money by looking up "fixes" on CZcams. I've fixed my bicycle My refrigerator several times. Hundreds of dollars saved on just that alone. Plumbing and now this, a little suction cup that that doesn't stick anymore and I thought no one would have made a video for that.... and here it is!
Mr. Singh!! Going to try this after work with a lighter. Judging by the positive comments, it should work. My dashcam has been sitting in my glove compartment for a month now.
Just tried this (the boiling water method) and I'm impressed at how it sticks again, therefore saving me from buying another mount again :D I'll see how much it holds in the coming days. But for now my hearttelt thanks 🙏🏻
Thank you for this video! The sun has been drying out my dash cam mount and I was ready to just buy another one. I am very happy to reduce plastic waste though and not buy another.
Great Help bro............I was fed up of my mobile holder regularly falling off the dash board even on plain roads and was thinking to buy a costlier one. But, your hot water technique has changed my whole thinking process. I am going to try it sooner than later.
Excellent video!! One suggestion though - Press the suction lever down before dipping into hot water to form the rubber into a better stronger cone. Direct flame damages rubber, but any very hot heat source at a safe distance works as a decent alternative to water.
It seems like that would defeat the purpose of the lever, which is to form a concave surface and the suction that goes with it. If the resting shape of the cup is made more concave wouldn't you reduce the vacuum effect when pressing the lever down?
Wow I think these are good ideas. My radar detector mounts don’t stick anymore. Was thinking I need to buy new ones. But I will try your methods first.
Thanks. Hopefully you’ll save the money by using these methods. If the suction rubbers have any cut marks or hard scratches then only alternate is to buy new one. If it’s just missing the stickiness, then they’ll be repaired by these methods
I have 2 Tom Tom's from different eras. The older Tom Tom's suction mount is wider and that worked perfectly. The Tom tom 6000's mount failed and also developed a tear once submerging in boiling water. Now I have put superglue into the tear and will try again later
I just returned to confirm that this trick really works, I used boiling water. The suction cup was not holding more than 4 minutes now have nearly 24 hours and it’s holding better than new. Because of that I will be subscribing and watching all of your videos to see what else I am missing. Thank you so much
I'd assumed my problem with the sticker was due to humidity, but I now think it was just usage over the last few years. As well as using just boiled water, I set the 'lock' to unlocked. The 'dimple' in the centre disappeared, I guess that was a 'Factory reset'. The difference was dramatic and looks very promising😀 Thank you Sukhneet. What would we do without CZcams to help us with these minor, but frustrating problems?
Thanks for your great video. Also, the phone plastic surface to hold the phone got sticky due to being under the sun everyday. It ven gets sticky to the fingers as well. What should I do to fix it ? Thanks
The world needs more Indian people. Thank you sir for a great video.
I’m a truck driver and didn’t have fast access to boiling water but I did use the a lighter and WORKED THANK YOU
That’s great to hear. Thanks for sharing
Don't smoke and drive guy
indian ppl uploading DIY solutions to any kinds of problems to youtube. love you guys!
Thanks 😊
I’m 😮
Yea... Just don't pick up the IRS calls 🙃
@@albert333pool 😂
When u say India , what you mean Hindutva too ???
Your boiling water idea is fantastic! It brought my 5 year old phone mount back to life! Thanks !!!
Just tried this (boiling water) on suction cups on shower grab bars that wouldn't stick anymore...and so far, it's working!! Thank you very much for sharing this!
Great to know. Thanks for the feedback
Does it still stick?
I did this but after 20mins it wont stick anymore 😢
Holy shit! I tried the boiling water method and it works! I'm sentimental when it comes to certain things. I've had my car mount since 2014 and didn't want to throw away the memories associated with it. Thank you so much! I appreciate you!
I totally get that, this mount took me on road trips and adventures :)
Thanks, car problem, computer problem etc. always an Indian guy on CZcams ready to help.
Used a heat gun, high setting, only for a few seconds (pulled cup away as soon as it started to smoke lol) and IT WORKED! Thank you. Suction cup for transponder on windshield.
Thanks a lot for this video.
It's amazing all the helpful things I can find on CZcams. Things that you would think would never be there or who would make a video about this or that and sure enough when I go to look it up..... there it is, someone made a video about just what I was looking for.
I've saved so much money by looking up "fixes" on CZcams.
I've fixed my bicycle
My refrigerator several times. Hundreds of dollars saved on just that alone.
Plumbing
and now this, a little suction cup that that doesn't stick anymore and I thought no one would have made a video for that.... and here it is!
Thanks for leaving the beautiful comment
Right !!!
Use it to string my weed eater.
I literally just tried with hot water and it works!!! Omg thank you so much for this video. It makes me really happy hahaha 😀
Mr. Singh!! Going to try this after work with a lighter. Judging by the positive comments, it should work. My dashcam has been sitting in my glove compartment for a month now.
Trying to fix for months! Boiling water worked! First try it was still wet, and didn’t work. Redid and dried well and voila! Thank you!!!
Tried the Hot Water method and it worked for me. Thanks again for the video. Saved me from having to buy a new mount 😁
Thank you! I will try it when I get home and hopefully it works! You're saving me money! God bless you!
Just tried the boiling water method and it worked thank you😊
The lights worked for me though I almost burnt mine soo I guess the hot water is safe. Thank you soo much for this. ❤❤❤❤
I tried the boiling water method and it worked!! Thank you so much; you saved me a few quid and another Amazon purchase 😀
Worked for me as well, a universal replacement was $10 and it took me 10 seconds to fix the issue , a dollar a second.
Sangat bermanfaat tutorial yang abang jelaskan, semoga berhasil juga untuk HP holder ku. Thank u
2 साल पुराना विडियो
लेकिन ये जुगाड पहली बार देखा
मुन्ना भैया (मिर्जापुर) - ये सही था
Just tried this (the boiling water method) and I'm impressed at how it sticks again, therefore saving me from buying another mount again :D I'll see how much it holds in the coming days. But for now my hearttelt thanks 🙏🏻
My pleasure
How is it doing?
How’s it doing tbh
Velcro also works I believ
You're the GOAT!! Thank you. #2 was faster and worked for me
Thank you for this video! The sun has been drying out my dash cam mount and I was ready to just buy another one. I am very happy to reduce plastic waste though and not buy another.
Great Help bro............I was fed up of my mobile holder regularly falling off the dash board even on plain roads and was thinking to buy a costlier one. But, your hot water technique has changed my whole thinking process. I am going to try it sooner than later.
Good luck bro. My dashcam is still on the windscreen after almost 7 months now, never come off.
That actually worked! Can't believe it, it's just basic science
@@namanmutta7562
Bro this will work on any mount and how much time should i wait before repasting the mount after cleaning with boiled water
Thanks for the video, very helpful and it worked like a charm!
Almost gave up on TomTom Nav bought for $30 lol, learned this hack from your video, and it worked, made my day, thanks
I just tried it as I had a problem with it. Trick with fire works. Thank you :D
You are a god send! Thank you for sharing such great advice. I plan on using your methods to fix my dash cam mount.
Hot water method worked great...Thanks!
Good to know 👍🏻
The first technique works. Boiling water! Thank you 😊
I don't really comment. But worked like a charm! Thanks!
Good to know. Thanks
This is a much-needed video! I was about to throw my webcam for my car away I was so disgusted with it falling off!
I’m hoping you didn’t throw it now😊
@@sukhsomal No, I followed what the video said, and my Car Cam has been sticking ever since. Great video😁👍🏾!!!
@@Ms.Mimi.Speaks which one the lighter or boiling water?
Boiling water worked perfectly for my radar detector! Thank you!
This video should have way more likes!! Thank you!!
Thanks 😊
Sticks so good....just like a John Mellencamp song. Come on baby make it stick so good.....
Amazing- thanks for the posting! You saved me buying two new ones!
My pleasure
I was trying to mount a brand new tpms display and it wasn't close to sticking. The lighter method worked great. Thank you so much.
Excellent video!!
One suggestion though - Press the suction lever down before dipping into hot water to form the rubber into a better stronger cone. Direct flame damages rubber, but any very hot heat source at a safe distance works as a decent alternative to water.
Might have to try my heat gun on my suction cup and see how that works?
I spent over an hour on this but couldn’t get I think I’ll try this method
It seems like that would defeat the purpose of the lever, which is to form a concave surface and the suction that goes with it. If the resting shape of the cup is made more concave wouldn't you reduce the vacuum effect when pressing the lever down?
@@d19jordan57 Agreed, resting shape should be flat; heating the rubber into cone shape is the opposite of what you want.
I’m going to try this. Thank you!
This is very helpful. You helped me save a few bucks!
Wow, I just did the boil water trick and it work! Thanks 🙏
Thanks for taking the time to post this video, it worked Dude!!
Wow I think these are good ideas. My radar detector mounts don’t stick anymore. Was thinking I need to buy new ones. But I will try your methods first.
Thanks. Hopefully you’ll save the money by using these methods. If the suction rubbers have any cut marks or hard scratches then only alternate is to buy new one. If it’s just missing the stickiness, then they’ll be repaired by these methods
Which company radar
Yes, I too was about to throw my Car Cam away and just buy another
Thank you, i tried the boiling water method and it works!
Works great!!! Thanks!
I have 2 Tom Tom's from different eras. The older Tom Tom's suction mount is wider and that worked perfectly. The Tom tom 6000's mount failed and also developed a tear once submerging in boiling water. Now I have put superglue into the tear and will try again later
Great brother,thanx for such a great advice.
This is a 5 star youtube video dude
Thanks
What a champ thanks for the video
Will be trying this for my car phone holder
Brilliant Sukhneet Thank you!
just tried this, is worked. thanks you so much
Thank you so much I really thought I was going to have to get another one which is a whole another headache
Great video sir. Thank you very much. 😉👍👍
Hi, thank you for your ideas. I tried the boiling water method but it didn't work. I will try the cigarette lighter method.
Very helpful indeed, thank you.
Hair dryer works great too, just have to do it for longer.
wonderful! love it mate
Thank you for the tip, I used hot water sticked again and feels different, thank you I was throwing away this suctions cups
I just returned to confirm that this trick really works, I used boiling water. The suction cup was not holding more than 4 minutes now have nearly 24 hours and it’s holding better than new. Because of that I will be subscribing and watching all of your videos to see what else I am missing. Thank you so much
Amazing. It works!
Thank you very much. You saved me time and money. 🤗⭐️👍🏽☀️🤩😃
My pleasure
You are awesome. Thank you!
Shouldve watched this video before i left the house. I hope it works. Edit will come later of results.
EDIT: It works!
thx for your help best wishes
Thank you for the video
I appreciate you. Thank you
Yeah great video, it will help a lot of folks with dash cam.
Thanks
Thanks brother!!
this is what i love about u tube thanks buddy
Thank you your the best!
Very useful video, I am also facing same problem. Thank u bro👍
You’re welcome
Blodryer on high heat evenly for mere seconds! Thanks!!
Thank you buddy!! Worked like a charm.. I used the hot water method.. :D
Thanks Mate
this worked!!! thank you so much!!
My pleasure
Will definitely try this ! …. Thanks !
Top tips excellent short concise and most importantly Work thank you sir
Thanks for the compliment
Thanks it worked for me
Wow can't wait too try this
Thanks bro your trick worked for me
Thanks for the good info
good video...thank you
Good! I’ll try just today 😊
Yup it worked for the dash
Going to use the hot water method & hope it will work.
Thank you
Thanks, buddy.
Thanks alot for this.
Thank you it works 😊
Boiling water worked, thank you
Quite helpful ❤
Thanks!
I'd assumed my problem with the sticker was due to humidity, but I now think it was just usage over the last few years.
As well as using just boiled water, I set the 'lock' to unlocked. The 'dimple' in the centre disappeared, I guess that was a 'Factory reset'. The difference was dramatic and looks very promising😀 Thank you Sukhneet. What would we do without CZcams to help us with these minor, but frustrating problems?
Thanks for your great video. Also, the phone plastic surface to hold the phone got sticky due to being under the sun everyday. It ven gets sticky to the fingers as well. What should I do to fix it ? Thanks
Thank you!!!!
Love you bro! 🥳👊
Thanks lot.😮
Thank u 😍🙏
Thank you so much sir
Thank you i think this will work.
thanks!
Good tips. Thank you. Save me few bucks from buying new one
Thanks