I bought used stalks for cruise control, but the lights stalk wasn't compatible. So, I took inside parts from my old lights stalk and put them inside new stalks. I made it compatible.
Sunt 2 modele de manete tempomat. Eu, din nestiinta, am cumparato pe cea gresita. Diferenta dintre ele este o piesa micuta din plastic, care se afla in interior, la maneta de lumini. Asa ca am desfacutmaneta mea veche de lumini, am luat acel plastic, si lam pus la maneta pe care am cumparato gresit, si gata. Vezi ca in video e un link la site-ul meu, si gasesti mai multe video-uri si explicatii despre ce am facut.
Thanks Bogdan! I am following your guide to do the CC retrofit soon and I am slightly confused. I have the type 1 on my car from factory (No cc) ... and found a used CC with a type 2. along with the wiper set as well (The whole set) I am not sure which one should I be hacking to make it work. (Hack the type 1 to make it work like a type 2 or vice versa) Any tip will be greatly appreciated
@@nichiforiuc I did but I can't quite see how you removed the black plastic from the type 1 and whether it is actually necessary to change the internal contacts or not. My car has the type 1, I have the CC with type 2. I probably need to watch the video a few more times
Din pacate nu stiu cum este la A6. Am auzit ca comunicarea intre module ar fi pe fibra optica dar nu stiu sigur. Sub video este un link catre pagina mea, si acolo gasesti tot ce stiu despre A3. Vezi poate te ajuta ceva informatii de acolo, si poate gasesti ceva similaritati cu A6. Spor.
Thank you very much, this video helped me a lot
thanks a lot. I converted type 1 to type 2 following this video.
Ja kada ukljucim desnu stranu prvo mi prebaci na levu pa vrati na desnu. Jel moze da se resi problem ciscenjem ove stvari?
Im confused as to what you did? It seems like you disassembled and put both stalks back together?
I switched inside small parts.
I bought used stalks for cruise control, but the lights stalk wasn't compatible. So, I took inside parts from my old lights stalk and put them inside new stalks. I made it compatible.
Follow the link in bio to read more about this. It is my webpage.
@@nichiforiuc Salut. Diferenta este doar la maneta pentru semnalizare si faza lunga? Ce modificari a trebuit sa faci la maneta de tempomat?
Sunt 2 modele de manete tempomat. Eu, din nestiinta, am cumparato pe cea gresita. Diferenta dintre ele este o piesa micuta din plastic, care se afla in interior, la maneta de lumini. Asa ca am desfacutmaneta mea veche de lumini, am luat acel plastic, si lam pus la maneta pe care am cumparato gresit, si gata. Vezi ca in video e un link la site-ul meu, si gasesti mai multe video-uri si explicatii despre ce am facut.
Thanks Bogdan! I am following your guide to do the CC retrofit soon and I am slightly confused. I have the type 1 on my car from factory (No cc) ... and found a used CC with a type 2. along with the wiper set as well (The whole set) I am not sure which one should I be hacking to make it work. (Hack the type 1 to make it work like a type 2 or vice versa) Any tip will be greatly appreciated
Hi Ignacio. Did you follow the link i video description?
@@nichiforiuc I did but I can't quite see how you removed the black plastic from the type 1 and whether it is actually necessary to change the internal contacts or not. My car has the type 1, I have the CC with type 2. I probably need to watch the video a few more times
Salut! As vrea sa montez pe un Audi A6 C6 pilot automat. Oare m-ai putea ajuta cu toata procedura?
Din pacate nu stiu cum este la A6. Am auzit ca comunicarea intre module ar fi pe fibra optica dar nu stiu sigur. Sub video este un link catre pagina mea, si acolo gasesti tot ce stiu despre A3. Vezi poate te ajuta ceva informatii de acolo, si poate gasesti ceva similaritati cu A6. Spor.
Am sa ma uit, mersi de raspuns!