Bet the cruise control option when the car was new cost way more than £85. Your new unit looks great Phil. Fantastic to see your plans coming together 😎👏👍
I have a mk6 golf dsg. Non GTI models don’t have paddle shifters however if your car has a full multifunction steering wheel then you’re in luck. The control module for the wheel contains the software for the paddle shifters anyway. So i fitted a paddle shift wheel and got the module function activated with VCDS and now i have paddle shifters. You can use VCDS to activate full needle sweep on ignition as well. There’s often thing like remote window close that you can activate via VCDS alone, no mods required.
Good unit Phil yes I agree 100% with the last comment lash out the money to paint and seal the floor before u put your shelving up. It then acts as a dirt barrier easier to maintain as without the concrete is so porous.
Well done. Though sure not lost on you both that red Ibiza has cruise as standard on indicator stalk. Considered a VW Up! at one point and retro fitting cruise but cost £700! Though lot more complicated. Need to confirm if car built to accept a change of module. If isn't, tough.
Unit looking good. Isn't there a requirement to have some basic facilities such as running water, toilet facilities and a break area, especially if you might plan to employ someone at some point?
Do you know if the car is OK to drive again after the install but before coding? I'm relying on a friend for coding but I want to get the install done at home and then drive over.
Yes but need a cable from the ecu to the steering wheel controller and possibly change the steering wheel control module if you dont have steering wheel controls, not as easy job as whats showing here
Do not buy a bottom Cowling you do not need it if you look at the one you’re taking off your see where you can actually cut it out very gently been there done the same job never bought a bottle of Cowling
super conversion this channel should go up leaps and bounds once the new unit is fully operational good luck phil and a thumbs up to apprentice lol
Yes loving the new unit if I could give you a little bit of advice paint the concrete floor now before you start putting things in it
Nice alternative content Phil and good to see you in the unit. Hats off to Nick, that is a well kept A3, looks in great condition.
Liking the new unit, first work completed in it, looking forward to seeing it with all the equipment in place!!.
Well done. New workshop is great, it will be good to see it develop.
Great video Phil and love the new unit can’t wait to see it all finished 👍👍
Great work Phil looking forward to the next video thanks for keeping us updated.
👍
Looks good Phil better than that damp unit 👊
Great to see you bk mate unit look great once fitted out good luck
So much better to watch in the new unit. Great little vid. - Only £85 quid (and a Nick with his laptop) and its done! 😄
New unit will be great for you and the channel hard work always pays in the end 👍
Bet the cruise control option when the car was new cost way more than £85.
Your new unit looks great Phil.
Fantastic to see your plans coming together 😎👏👍
That's what i call a great man cave phil.
Subs should shoot up after this.
Nice work, ,the unit looks,good Phil.
Nice one Phil looking forward to the new unit stay safe mate 👍🍺
great vid good luck with new unit thank you.
I have a mk6 golf dsg. Non GTI models don’t have paddle shifters however if your car has a full multifunction steering wheel then you’re in luck. The control module for the wheel contains the software for the paddle shifters anyway. So i fitted a paddle shift wheel and got the module function activated with VCDS and now i have paddle shifters. You can use VCDS to activate full needle sweep on ignition as well. There’s often thing like remote window close that you can activate via VCDS alone, no mods required.
great video phil very interesting
Nice unit Phil, better light bet you can’t wait to get the ramp installed,
Superb new unit Phil with plenty of space m8y 😃🍻👍🏻
It's a better channel with you and your "apprentice" 🤗🤗🤗
Good content, I did the same to a 407 Peugeot a few years ago, it made a crap car a bit better :-) Liking the new unit, good luck with it.
Love the unit plenty of room
Phil,, im buzzin for ya lad,👍👍... The only way is up , your unit looks mint,😊
Hi Phil,great job,if this was this easy to do to any car it would be ideal 😁,
Must be good not having a burn running through the middle of the workshop now 👍👍
Good unit Phil yes I agree 100% with the last comment lash out the money to paint and seal the floor before u put your shelving up. It then acts as a dirt barrier easier to maintain as without the concrete is so porous.
Have I missed the XJS videos? Would love to see more of that 😁
Well done. Though sure not lost on you both that red Ibiza has cruise as standard on indicator stalk. Considered a VW Up! at one point and retro fitting cruise but cost £700! Though lot more complicated. Need to confirm if car built to accept a change of module. If isn't, tough.
Go go serious about salvage absloute mint phil cant wait see the content going to go thru here buddy 💥👊🖐 smashed it,,, u getting ramps?
Cooooooool! 👍🇬🇧
First job in the new unit??? The room and light.....must be good!!
Lovely Jubbly, please wear a mask Phil, or you might get hammered on here the way it's going.
Great unit Phil can you say what size it is thanks
Unit looking good. Isn't there a requirement to have some basic facilities such as running water, toilet facilities and a break area, especially if you might plan to employ someone at some point?
Hi, Can I please have the guide you are using and also the part you have used (cruise control) - Thanks!
Hi Phil how did you get hold of vcds and how much was it?
Do you know if the car is OK to drive again after the install but before coding? I'm relying on a friend for coding but I want to get the install done at home and then drive over.
Great new unit. Are you building a small spray booth in the corner ?
Not to sure yet mate, I'm hoping I have some one on for painting in the new year.
👍👍
Hello phil hope you are doing well i have same modle audi A3 2013 And i want tO install cruise controll Are you willing to to this please let me know
Is it possible to fit cruise control on a Audi A3 S-Line 8P 2.0 Ltr. 2007 and where
Yes but need a cable from the ecu to the steering wheel controller and possibly change the steering wheel control module if you dont have steering wheel controls, not as easy job as whats showing here
Whats the stalk Part number
You don’t need your wellies any more! 😂😂😂
Do not buy a bottom Cowling you do not need it if you look at the one you’re taking off your see where you can actually cut it out very gently been there done the same job never bought a bottle of Cowling
If i remember correctly each a3 has its own unique security code and if i also remember audi want ££ for it
Did this on my lexus ct200h , nowhere near as complex or involved. Hence why i stick japanese cars.
Still stuck on 7k subs 😱
For a supposedly premium car the spec is always crap on newer Audi s
Where's your "running water" gone ????
Are you missing my stream?
@@SeriousAboutSalvage yep !