Nice ride I know that country up there I worked up there half my life I love the cornfields and the hills and stuff...... that uphill was rough though y'all ride safe guys
It's hard to tell how big a hill is on camera trust I know u can hear the motor how it was getting a Lil tired but dang that's a nice Lil race strip bikes lookin sick as always 💪🏼💯💨💨💨💨💨💨
Great ride.That was a long steep grade to ride up and the motor had no probs getting up torque. The other side of the coin is finding you don't have brakes After getting to the top.Yikes.
Very nice ride a long! Your bike sounds pretty good. I hope you can get to idle and it will be sweet! Most people don't take the time or have the patience to deal with the slow idle announcement and idle jet to get these little motors to run correctly. Just curious, what elevation are you at? I am at 5400 ft so it's a bitch to find small enough idle jets to idle at that elevation. You have to use very good quality, carburetors, and spend a lot of hours to get them to run smooth at that altitude..Keep up the great work and stay safe out there my friend.👍
I agree, bro lots of people don’t like to take their time on these and mine. The only reason mines doing that is because in that video prior I had lost my idol screw during a ride since then I have replaced it and everything is back great again thanks for watching brother.
Cool bike, but the header is way longer than the exhaust that would be on the minarelli engine - booster, bws etc. Look at the whole Athena kit or malossi exhausts used on scooters.
Bikes looked and sounded awesome brother's ride safe glad to see the snow has melted
You I’m glad it’s getting nice out thanks brother appreciate it
Thanks
Nice ride I know that country up there I worked up there half my life I love the cornfields and the hills and stuff...... that uphill was rough though y'all ride safe guys
That’s cool bro n thanks
Nice. I play hills, for real. Welcome to the Mountain Goat Club! Thumb throttle clearly Little Evil. Wingman must be Wizard45. Thanks for the ride.
Thanks
Hell yeah thanks brother
Good ride 💯💯
Thanks bro
Bikes look good, Good video
Thanks bro
Was a fun ride bro
He'll yeah thanks for the ride along bike sounds great be safe out there and have fun
Thanks brother appreciate it
Brother, that was a stray up Rip!!!! ❤❤❤ dam bro, that Hill was wild. 😅😅😅 thanks beother. I needed that this morning. 🙌
Hell yeah thanks for your support brother
It's hard to tell how big a hill is on camera trust I know u can hear the motor how it was getting a Lil tired but dang that's a nice Lil race strip bikes lookin sick as always 💪🏼💯💨💨💨💨💨💨
Hell yeah thanks brother appreciate it
The hill climb was awesome bro!! That bike sounds too good 👍🏾😁
Thanks bro
Nice ride!
Thanks bro appreciate it
Nice run 🚲💨💨💨 through the hills💨💨💯🏁
Was a fun ride thanks brother
Damn Hill was Massive, Bikes Sound Great Back to work, ill finish this evening Guys 👽👍🏻
Hell yeah thanks brother
Thanks again
@@Littleevil9975 👽👍🏻
@@bikewizard4514 👽👍🏻
Love the paint job, man. Excellent build!
Thanks bro appreciate it more videos coming soon
You can do a FULL video lookin for BikeWizard!! The theme of the vid will be: "Wheres BikeWizard"???🤔 Anyhow, awesome rip!
Ha ha lol good idea lol thanks brother
Good video brother thanks for the rip 🚴💥🚀
Thanks brother
Great ride.That was a long steep grade to ride up and the motor had no probs getting up torque. The other side of the coin is finding you don't have brakes After getting to the top.Yikes.
Ha ha lol yeah definitely need that breaks thanks for stopping bye brother
Very nice bikes guys
Thanks appreciate it
Thanks
Great video
Thanks
Bad ass Build 🔥🔥🔥
Thanks bro please subscribe have more videos coming soon and a new video up today
Local bem diferente de onde moro
Mano a sua bike é braba viu
Yeah definitely a lot different and thanks for the compliment brother
Very nice ride a long! Your bike sounds pretty good. I hope you can get to idle and it will be sweet! Most people don't take the time or have the patience to deal with the slow idle announcement and idle jet to get these little motors to run correctly. Just curious, what elevation are you at? I am at 5400 ft so it's a bitch to find small enough idle jets to idle at that elevation. You have to use very good quality, carburetors, and spend a lot of hours to get them to run smooth at that altitude..Keep up the great work and stay safe out there my friend.👍
I agree, bro lots of people don’t like to take their time on these and mine. The only reason mines doing that is because in that video prior I had lost my idol screw during a ride since then I have replaced it and everything is back great again thanks for watching brother.
nice vid but i think i might retire from motorized bikes its getting really expensive and i allready got a 86 cr250 that needs working on
That sucks bro hopefully you stay in the hobby but I completely understand you
Nice work man💪🏼
Thanks bro
🔥🔥
Thanks bro appreciate it
Your bike is like a banshee his is like a 125 reffering to quads that thing got some puuuuuLL
Hell yeah bro fun motors for sure appreciate all your support brother
@Littleevil9975 hell yeah bro glad your channel doing good 💪🏼
Thanks to people like you
that power band tho sounds like it would come on strong
Yeah you definitely better hold on when it does fun motor for sure
Dang he was waaaay back there
lol
@Littleevil9975 all good tho slowly but surely hey I made it tho right lol all that counts 💪🏼💯💨💨💨💨
Wicked Speed
Thanks bro
Nice ride man !! You know my Minarelli it’s true rocket but clutch slipping
I don’t know if I need a saf clutch
Have you tried tightening the inner spring put some more load on it or you can also build your own SAF clutch for around 20 bucks?
Can you sent me a part list thanks man I’m out for clutch test my inhibé is very powerful 🤘🤘🤘🤘
too much power for that clutch (?)👌
I know I have the saf clutch just haven’t installed it yet
@@Littleevil9975 no worries buddy sounds really great, good job on that engine!
Thanks bro planning on Gemini rims next and different muffler to
@@Littleevil9975 sounds good buddy sounds good.
Much appreciated brother
Cool bike, but the header is way longer than the exhaust that would be on the minarelli engine - booster, bws etc.
Look at the whole Athena kit or malossi exhausts used on scooters.
Ai sim que baik linda
Thanks brother I appreciate that
More videos coming soon
Nice sounds good,hey I just ordered this same engine.can you please tell me what size carb and brand and cdi brand is best for this
Sure I can help you out just depends. Which motor did you get bro? Did you get the Athena? Or did you get a minarelli
My motor is the Athena. I’m assuming you ordered a minarelli i’ve never heard of any place selling the Athena. You have to build it.
Good video sir, Do you do product reviews? We'd love to invite you to review our portable air pump. There's no way to connect with you
Yes, I would be interested in trying it out and doing a review for you on my channel. Do you have a email address I could contact you that way
Or you can contact me at tapout9975@gmail.com I would be interested in seeing exactly what your product is also
@@Littleevil9975 Hi, I just emailed you about the details
@@Littleevil9975 Done
OK cool thanks I will go check it out