DIY: BobMr2 Installing 808 Coilover on Toyota Mr2 Sw20
Vložit
- čas přidán 22. 05. 2020
- This video will show you how I Install me Own Custom Bob Pham Coilovers for the Toyota Mr2 Sw20.
When doing ride Height make sure to disconnect one side of the endlinks, or else the tension from the swaybar will mess up the coilovers preload.
Hit me up on Instagram @BobMr2 if u want these Coilovers.
Follow me on:
Ig@BobMr2
CZcams: Bob Pham
Join FaceBook group:
#Mr2Owners and #SocalMr2division
Below are my other DIY for the toyota mr2:
DIY: BobMr2 Replace Rear Bumper on Toyota Mr2 Sw20
• DIY: BobMr2 Replace Re...
DIY: BobMr2 how to roll fenders on Toyots mr2 sw20
• DIY: BobMr2 how to rol...
DIY:BobMr2 Remove 3sgte Engine on Toyota Mr2
• DIY:BobMr2 Remove 3sgt...
Why you Must Get Your Fuel Injectors Tested & Cleaned
• Why you Must Get Your ...
DIY: Remove Lock Cylinder on Toyota Mr2
• DIY: Remove Lock Cylin...
DIY: How to Flex Fuel Your Car
• DIY: How I Flex Fuel M...
DIY: Oil Change 1995 Toyota Mr2 Turbo
• DIY: Oil Change 1995 T...
DIY: BobMr2 Setting Preload on Actuator "Wastegate" For Toyota Mr2 3sgte
• DIY: BobMr2 Setting Pr...
DIY: BobMr2 Leak Down Test on 3sgte
• DIY: BobMr2 How To Lea...
DIY: BobMr2 Making Custom Gas/E85 Fuel Line
• DIY: BobMr2 Making Cus...
BobMr2 Comparing Engine Management Link ems vs Stock Ecu for Toyota MR2
• BobMr2 Comparing Engin...
DIY: BobMr2 Removing Some Interior Pieces in Toyota mr2
• DIY: BobMr2 Removing S...
DIY: BobMr2 compression test on Toyota Mr2
• DIY: BobMr2 compressio...
DIY: BobMr2 changing spark plugs on toyota Mr2
• DIY: BobMr2 changing s...
DIY: BobMr2 changing transmission on toyota Mr2
• DIY: BobMr2 changing t...
DIY: BobMr2 changing out E-Brake cable on Toyota Mr2 Sw20
• DIY: BobMr2 changing o...
DIY: BobMr2 swapping turbo on 3sgte gen5 • DIY: BobMr2 swapping t...
DIY: Fuel Level Sensor Diagnose / Replacement for Toyota MR2 SW20
• DIY: Fuel Level Sensor...
DIY: BobMr2 change Shifter Cables on toyota mr2 sw20
• DIY: BobMr2 change Shi...
DIY: BobMr2 installing complete 94+ “ kouki “ tail lights on Toyota Mr2 ...
• DIY: BobMr2 installing...
DIY: Installing Coilovers on Toyota Mr2
• DIY: Installing Coilov...
DIY: Fix steering wheel column cover for toyota mr2
• DIY: Fix steering whee...
DIY: Replacing gen4 3sgte fuel injectors on toyota mr2 sw20
• DIY: Replacing gen4 3s...
DIY: change ss brake lines on Toyota Mr2 sw20
• DIY: change ss brake l...
DIY: How to roll fender on mr2
• DIY: How to roll fende...
DIY: Installing Coilovers on Toyota Mr2
• DIY: Installing Coilov...
DIY: 3SGTE GEN 3,4,5 TIMING BELT KIT
• DIY: 3SGTE TIMING BELT...
Sw20 mr2 e153 LSD vs non-lsd transmission axles
• Sw20 mr2 e153 LSD vs n...
DIY: 45mm Omori boost Guage into mr2 cluster
• DIY: 45mm Omori boost ...
DIY: Toyota Mr2 sw20 engine/gas tank drop
• DIY: Toyota Mr2 sw20 e...
DIY: how to make 3sgte gen4 fit into toyota mr2 Turbo sw20
• DIY: how to make 3sgte...
Diy: Installing front solid molding for Toyota MR2
• Diy: Installing front ...
DIY: Changing Alternator on Mr2 Turbo sw20
• DIY: Changing Alternat...
DIY: TOYOTA MR2 AXLES CHANGE
• DIY: TOYOTA MR2 AXLES ...
DIY: How to compression test engine by it self w/o car
• DIY: How to compressio...
DIY: Toyota MR2 sw20 - Fix Strip fog lights bolts.
• DIY: Toyota MR2 sw20 -...
DIY: change coolant on Mr2 sw20 3sgte
• DIY: change coolant on...
DIY: Change Transmission oil on sw20 mr2 3sgte e153
• DIY: Change Transmissi...
DIY: oil change 3sgte Gen4 Mr2 sw20
• DIY: oil change 3sgte ... - Auta a dopravní prostředky
![Fixing This THRASHED NISSAN CUBE Car in just 3 DAYS! [Finale]](/img/n.gif)
Just came across your site. Holy chyte Bob, Love what your doing. Had an '86 mr2 NA in the early 90's - I still dream of her. always dreamt of second generation turbocharged model. And there are out there because of people like you. To this day I compare every vehicle I drive to my '86 and it always wins; have had BMW, Mercedes, Ford, Nissan's, Lincoln, R.Rovers in petrol and have had a couple electric i3's and I always come back to that manual transmission and mid engine design of joy; MR2
thank you soo much for these videos helping me a lot with my 93 mr2
very detailed. now I realized hw to screw front end link on my adjustable absorber.
You say your not a professional mechanic you seen to know more about these cars than most out there so i think that makes you a pro great work as ever always plenty of tips along the way love these cars i have two of em like little go karts all the best
Great video. Detailed and even the little extras about covering the CV boot or putting in the knuckle bolt the opposite way from factory as a tip is great.
I guess Im randomly asking but does any of you know a way to get back into an Instagram account??
I was stupid forgot the account password. I would appreciate any help you can give me
@Alijah Maxwell thanks so much for your reply. I found the site on google and Im in the hacking process atm.
Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.
@Alijah Maxwell It worked and I now got access to my account again. Im so happy:D
Thank you so much, you saved my account :D
@Drake Salvador No problem =)
Very detailed, excellent!
I bought a 1992 Turbo I'm in the UK. It's my first car I'm 42, I've been doing some interesting things regarding reading data from the ECU. I've captured Pre OBD/obd1/ToyOBD Data. I've now moved on to real time data, I really don't like boost gauges on dashboards etc (Like bolt on stuff) I love how my stock MR2 Turbo looks it has some class about it. So I have this data now and I can use it to display it however I please. first I removed the cigarette lighter and fitted a 2.2" round LCD screen. but the LCD has such poor refresh rates and was not very bright. on top of that its not really the most ergonomic place to display data (I'm determined to use a screen there for something anyway! ). I am a software developer by trade, with a degree in Electronics and I have a 3D printer that I'm mastering fast. I don't do social media(I'm a developer I know better) but when I have something respectable I'll update you. I love what your doing.
Hi there bob, where did you get the drop links from? I need the kind like the ones you have with a flat near the end so that I do not need to use a hex key on the centre to tighten them. Thanks!
Thanks man!
Hi Bob. Thanks for the video. What size tire are you running? Will 245/45/16 fit with your coilovers?
Right on brotha!
Hi Bob, I'm in Sydney and was wondering what type of coilovers they are. I have a stock N/A hardtop 1995 sw20 on stock 15 inch rims and am wanting to upgrade the suspension as it has never been done. I'm looking and researching what would be set for me. Being realistic it will probably not do any frequent track work however it will be used daily and I drive it quickly.
Thanks again Bob for another great video. Does the tire flex when racing that may cause rubbing on the coil overs?
No. It’s a lot of room when with 255/40
hey bob, im from fresno, and i have a 93 turbo mr2, i need a rear driver spindle if you can help a brother out.
Hey Bob Whats the price on the coil over kit where can. Get them
Can you make a video of how to properly jack up the front of the MR2 and where to place the jack and jack stands. Thank you
There’s no proper way to jack front without damaging. Front ends are weak metals will bend. Only way I use are the side pinch welds with back pads with grooves. Or else u will bend those side pinch welds.
If I jack from the side pinch welds, where should I place the jack stands at?@@BobPham
@@mr2cqql Jack the back one then stand on the front and x member
What are you planning to do with your old Tein coil overs? Are they still good?
Datty77 sold it same day I post it on my Instagram @BobMr2
Hey bob what the price for the coil over and where can I get them
1300/1400 depends how much I get in my batch of orders. u can dm on Instagram @BobMr2 or email 808motorsport@gmail.com ,
How many times did Bob use the phrase “pretty much”?
Manny Tang alot
do you have to roll the fenders to drop it? or is it just a recommendation
Roll only if it rub
Bob Pham what size tire/rim front and rear?
What tires size are you running front and rear?
235/40/17
255/40/17
The one on the video is 215/40/17.
235/40/17
Do you have to get an alignment now after installing?
Yes.
He sed it at the end of the video 😒
are those bc racing coilovers?
If they are not they are very close as ive got bcs on both of my mr2s there a great set of coil overs handles like a go kart
@@Bladerunner4511 i had a set on my mk1 golf and in terms of handling at least in an auto cross road/course situation they left me disappointed and i eventually went back to a fixed spring perch strut and spring combination.