Transplant iPhone 13 Screen IC Step By Step

Transplant or swap the iPhone 13 screen IC to solve non-genuine screen warning and remove "Important Display Message". Here is an iPhone 13 Display Screen Without Touch Screen IC, and there is a flex cable, let's transplant the iPhone 13 screen IC step by step.
iPhone screen without IC: www.diyfixtool.com/products/f...
Step by step:
1. Remove the Screen IC from the corresponding model screen.
2. Put the screen IC on the corresponding position of the cable (note the direction of IC placement, there is a small dot in the upper right corner).
3. Solder the IC.
4. Peel off the black tape corresponding to the screen.
5. Put the soldered IC and cable to the corresponding position of the screen (the position of the black tape).
6. After matching, do not solder the cable.
7. Connect the screen to the motherboard and test whether the IC will touch the backlight of the mobile phone. If there is no problem with the position, you can solder it. If there is a problem with the position, please move the soldered IC and the cable position until it does not affect the backlight of the mobile phone.
Note: When soldering the cable to the screen, the temperature should not be too high and the time does not take too long.
More details:
Official website: www.diyfixtool.com
Instagram: vipprogramm...
Facebook: vipprogramme...
Twitter: vipprogfixphone
CZcams: / @phonefixbellin

[@ramandeep786]

thanks for this video, it was very helpful

[@darkprocom]

Thanks!!!!

[@Azoozhardware]

😍👍

[@rawanabard4783]

without soldering from new flex with a new Display? just add ?

[@Phonefixbellin]

Hello, need to transplant IC.

[@christianccallomamani6023]

Tienda en AliExpress?

[@Phonefixbellin]

Hola, no publicamos este producto en la plataforma de Aliexpress, puedes consultarlo aquí: www.diyfixtool.com/products/for-iphone-11-14-pro-max-display-screen-no-touch-ic

[@itzlit9873]

Where can I buy this flex adapter

[@Phonefixbellin]

hello, the flex cable is not sold separately.

[@ramazankurtulaj7128]

​@@Phonefixbellinit doesn't really work ... it still shows the notification

[@wassup5793]

@@ramazankurtulaj7128 It works for me you need to reball the IC properly. It's just the warning message/unknown device what is disappearing but you can only restore true tone by programming it.