Husqvarna TE 300 Pro Edition 2024 Is It Worth The Price?? 2024 Husqvarna TE 300 PRO EDITION!!!
Vložit
- čas přidán 9. 11. 2023
- Husqvarna TE 300 Pro Edition 2024 Is It Worth The Price?? 2024 Husqvarna TE 300 PRO EDITION!!! 2024 Enduro Model Pricing Below
Take a look at our other social media outlets!
www.funventurerentals.com/
www.believersthatride.com/
/ bryan_burton_funventures
www.mountaindirtymotorsports....
/ funventurerentals
If you are in the market and are looking for the best dealership I've ever found, then give Lee a call at www.mountaindirtymotorsports....
Best dealer experience we've ever had. No haggle buying experience and no puffed up dealer fees. Family owned and operated and you feel like your business is always appreciated! They offer KTM, Husqvarna & GASGAS
Husqvarna TE300 Pro $13,249
Husqvarna TE300 Standard Model $11,549
2024 KTM 300 XC-W Hard Enduro $13,049
2024 KTM 300 XC-W Standard Model $11,449
GasGas EC 300 $10,699
Sherco SE 300 $11,999
Beta 300RR $10,099
Beta 300 Race Edition $10,399
Yamaha YZ250X $8,099
Rieju 300 MR $9,699 - Auta a dopravní prostředky
Best dirtbike I’ve ever ridden I just bought one 😍
Agreed! Congratulations! 👍
how long can you ride for on a tank of gas?
@@phillipmunro2421 I’ve gone 55 miles with a couple inches of gas left in the bottom of the tank.
@FunVenturesBTR would you say that's good? Or not so good?
Best looking husky, I’ve got a 2023 te300 and I’m pretty much going for that look
Worth it. The cost of the parts retail and the standard TE300 is more than the TE300 Pro.
What a beauty, I want one, sherco looking pretty nice to though
LOVE this bike! Ended up buying the KTM because I can barely afford that one. The Husky Pro was 2g more. Ouch.
just bought the FE350 PRO, cant wait to get it in 2 days.
how did you remove the original skid plate? did you have to take the pipe off?
The grey is just awesome
Agreed! 🤙🏼
If you want the brembro brakes and rad fan, it starts to make sense.
Cant wait to see what else you do to it! Not sure if it can get much better 😍
😁👊🏼
I have the same bike so I guess that answers that question.
I pick one up in 2 weeks gnarley looking setup
Wow love the colors. If I could afford a new bike that would be the bike I would get the TE 300 pro.
Yes! 👊🏼👊🏼
Absolutely beautiful!!
Diggin it for sure! 👊🏼
The bad thing for me with these type bikes, I ride them hard and go on long gnarly trails and to have something that pretty and nice doesn't make any sense. Every time you take it out you're worried the graphics, wheels, etc. are going to get damaged, which they are. If it's going to sit in your garage and you just marvel over it, that's the perfect bike. It is a beautiful bike!
Depends on the type of person you are my I have 2 300’s that well over $20,000 each after I built them and they get the piss beat out of them.
@@hadleybennett6875 I have 3 of them, all about $20K, know what you mean.
@@hadleybennett6875same lol. I want to get my $ worth. My 2023 has 20hrs and looks like it has 100. Threw it down a hill the 2nd ride lol
When I buy a brand new bike, I take the stock plastics off immediately and throw some other ones on. The way I look at it, I get to customize my bike and I’ve got the brand new stock plastics to throw on it when I’m ready to sell
Actually not a bad idea
Worth every penny to buy this or the KTM hard enduro. I bought the plain 24 KTM 300 and added the bling and I should have bought the hard enduro. I did add the WP Pro shock and forks though. Best looking husky I have ever seen! Period!
Picking up my TE Pro in the next week or 2. So I'm interested. I'm coming from a 23 TX300. I. Gonna need to get a head and tune but wanted the bigger stator, lights, the new suspension, and really missed oil injection. Had to go pro for the brembo brakes. Can't wait to get mine and see what it's like
Those are all good reasons for sure! I have a 23 300xc and love the motor, but I much prefer the TE in the gnarly stuff! Enjoy your new bike! 👍
Worth it for me - I bought one a few weeks ago. love this bike!
Agreed! Congratulations!
That is a sharp looking bike. If the dealership in Edmonton would trade me with a substantial trade on my 2020 te 300 I. I would love to get that grey plastic kit. Very nice.
Have fun ride Free
Most Gorgeous dirt bike!
Good looking bike, but I think I have a contrary option on the color. Plastic style and graphics are awesome, but the colors makes it look like something from an old black and white movie. I guess I would have to see one in person. I’d love to have that bike tho. Thanks for sharing 👍
Can you get at the sparkplug without removing fueltank?
Is it true cant use last 2 liters of fuel due to new tank design?
Great looking bike
No and not entirely true
I’d yes yes, that thing looks amazing.
Cool bikes! 👍
That thing is unbelievably gorgeous.
Great bikes! Here’s what it looks like now.
czcams.com/video/R39zwB7Y4kY/video.htmlsi=xLQvp-lYlEK5SkKU
This is the 60 shades of grey…😁😁😁
Looks tremendous.. if I’m financing half the cost then I’ll add a few dollars to get the pro.. I’d think a little harder about it if I was paying cash.. I saw one at the dealer and it was the dopest looking bike on the floor
Hopefully you went through with it. I have been wanting the new 24 300xcw. KTM/Husqvarna were doing a .99% finance rate so it was a no Brainer for me. Coming from old Japanese 450s I am loving the 300.
I hope rm gets a plastic kit soon. So I can put the oem ones in a box and then go shred!
What is the swingarm guard that you have on that bike?
Cross Linked Components 👍
It’s a yes ! 🙌🏻
Yes!
Doing any ecu changes? Latest map is good?
It is good. Doing a TSP head and tune now.
the rear silencer looks standard ;;;
If you accidentally hit the start button while it’s running, does the starter engage, explode the bendix, and lock up the motor, like other aftermarket switches? Or, is there an interlock?
To be clear, if you hit the start button while the bike is running it's not good for them but it doesn't just explode or break. We've all hit the start button on accident while the bike is running and no issues. The issue that causes the bendix to explode, is when you accidentally hit the start button, and an aftermarket button keeps the starter engaged for a very long period of time and you don't hear it and don't know it until it's too late. Problem solved would be to just keep the stock button and if you do accident'y hit it while the motor is running it's no big deal, it's not going to do any damage and it won't stay engaged. Hope that helps.
I think they are well worth the extra money for what you get. There are a couple of issues and one is the quality of the plastics is garbage. They are the cheapest Chinese plastics that KTM could have sourced. Breathe on them and they break. As for the looks , I agree! That Husky is the sickest looking bike that has come out in a long while. I love the HE too but that Grey is beautiful!
My thoughts are I’m getting one.
Haha… yes! 👍👍
Congrats on the Pro, it looks incredible! What can you say about the seat hight ? Im 6fee5.5 and really like the look on the Husqvarnas, also PDS vs Linkage? Opinion? , would you say its a big diffrenece seat wise with the specs saying the KTM is taller ? PS , I look for tall bikes haha, and also I see you're using Bolt's accesories , skidplate and chain guide haha, so would I haha, being obsessed with his Factory Husky I noticed a thing, and dont really see it on other consumer bikes, I think he has more rear wheel travel , eighter way the shock is a tad longer of the linkage is a little different, or I may as well be wrong , considering the tall seat makes the bikes look different.
I owned a TE300 and they feel tall for sure. I’m 5’10 and got a lowering link(threw off how the bike handled big time)
@@DirtNastyy didnt like the bike after the lowering, or in general ? Do you prefer pds?
What are the Performance Gains from the FMF Pipe ?
Really none - guys will say better low end, some will say better top end...but at the end of the day the bike can out perform 99.999% of every buyer in stock form. If you compare the stock pipe with the FMF side by side they are exactly the same. I have the same bike (KTM) and have a stock pipe and a KTM gnarly and I did not notice any difference other than looks.
There are noticeable power increases over the whole rev range. It’s more noticeable up top than down low. The stock pipe and this pipe have a bit of a different shape when they’re both in your hands. Slightly different sound as well. This pipe is also stronger than the oem pipe. The gnarly pipe definitely has more low end grunt, but signs off when revving up high. I prefer the fatty over the gnarly. They’re also significantly less in price than the oem pipe. I take the oem off and keep it for when I’m selling the bike.
@@FunVenturesBTR Are you comparing a stock pipe off of a TPI or TBI bike? I am comparing off of a TBI bike. Sound different, yes...tougher than stock, maybe a little but I've noticed TBI pipes are tougher than the TPI bikes.
@@onthethrottle7104 I’m talking about tbi bikes. I own a 23 300xc, a 24 te300 and a 24 XC-W. I run the fmf factory fatty on all of those bikes. The factory fatty is stronger than the oem pipe and offers a better power over the full rev range. This is also true of my previous tpi bikes. Are you suggesting the fmf doesn’t offer any power or durability benifits over the oem pipe?
My gas has never looked that dark though do you have any idea why?
Additive added for shipping is what I was told 🤷🏻♂️
Take my money. ❤ Looks so sick.
Easiest money I’ve handed over in awhile! 😁👍
I don’t know how cold it is while you’re filming, but the black anodized nipples really stand out! ❤
👍👍
Do you prefer the te300’s over xcw’s?
The '24 models are basically exactly the same now, except I think TE comes with Braktek on the non-Pros if there's still a supply shortage (so the $100 less KTM is a better deal).
headlight on husky looks like its from 1972.....shape of plastic and a huge lens is the only thing am not a fan of
other than that its looks really good, i kinda bashed harden enduro price but after your all said and done, you would have more $$$ into the bike if you did it on your own.....really hard to negotiate on these as well where I am at......they run about 4k more than standard version
saw the harden enduro for first time yesterday....I like the KTM overall look a lil better but at same time you see orange bikes everywhere......
Looks very 1972,but otherwise cool
I have too much fun riding mine so it stays scratched. HARD ENDURO
Can you get one that’s not grey?
You sure can. Here’s our video of the standard model.
czcams.com/video/kl4jG0CUjNI/video.htmlsi=VaXsalBwgrGe2mDi
Stuff that paying £12k for a 2 stroke in the UK, 12 months later it will be worth £6500k.
Can I borrow it? 😀
🤣👍
You really didn't go over what would make it worth almost 2K more than the standard edition. It looks great but honestly the only real upgrades are the fan and the brembo brakes which you could add to the standard model and still have money left over for guards etc. Everything else is just bling really.
You should price out what a set of new Brembo brakes cost. Calipers and master cylinders. Full setup. Bractec are garbage! The bike also has front and rear disc guards, linkage guard, tugger strap, radiator fan, axle pull, functional ribbed seat, Galfer solid rear disc and floating front disc (price those out), Supersprox rear sprocket, and don’t forget the special edition Excell wheels. All of these items total far more than the $1700 difference between the standard model and the pro model. Not to mention this bike is far better looking and will have a better resale value than the standard model. Easily worth it to me! I’ll take one over the standard model all day any day!
@@FunVenturesBTR tbh I have not priced out the brakes. I've been on a few bikes with Bractec and I thought they were fine, much better than the Magura brakes Husky's had before, Brembo is still better. The front disc guard is a cheap plastic piece, you replaced the skidplate and rear disc guard so you can't those. Tugger straps $60-80/set. Seat cover is nice. The rest, sprocket, rotors, wheels are nice but IMO don't add value as they are not something people will notice in terms of performance. Don't get me wrong, it's a killer bike and I'd love to have one as well. Congrats on the new ride!
@@cdnmoto849 The Bractec have gotten better than the previous years. Still not Brembo. It sounds like you are just wanting to be right. You go right ahead with that. No use debating with someone who’s got their mind made up and has the time to write long winded responses. You enjoy your bike and I’ll enjoy mine. ✌️
@@cdnmoto849 if you built it just like that, it would cost well over $1700 without labor, KTM comes with triple clamps as well but not sure about Husky.....most that have built standard bikes wish they would have started with this platform after the fact....
the issue is you have to pony up from get go and somehow that sticker shock throws off people not realizing you will be well over that amount $200 at a time for the next 6 months,.....
@@kirkdunn1379 fan, rotor guards, that's about all it comes with that you'd be adding to the base model. The rest is bling. I don't think many people would buy the fancy wheels etc. The Brembo brakes are an upgrade for sure but the base model should already have Brembo IMO as husky is supposed to be the "premium" KTM brand. So, not saying the sum of the parts isn't equal to $1700 or more rather a lot of it is not parts you'd add if you bought the standard edition. The bike is amazing can't deny that.
Grey men)
Frothing.
Riiiigt! 👊🏼
If you're worried about "roughin' up" your dirt bike, then don't get a dirt bike.
Easier said then done, I get it when its a freshy
2024 MODELS have a very BIG PROBLEM, the oil is only for 80km, the reserve oil dont used in this bike, and It stop engineer with 2L in oil tank, for my is a terrible Husqvarna mistake and the company dont change It for other pump bomb system or other designed tank. They dont tell us this problem in the motorbike reviews. The motorbike stop and you can see a lot of oil in the tank, It is a Big problem.