I already did once lol. Next time i take my clutch cover off im doing one too. It seems people can find me but they can find dons videos i hope they find yours too though lol. The only thing i saw that you didnt put in that i always put in is manual new clutches and mainly the springs. I found out the hard way it WILL slip without the springs.
Yea, I really thought hard about doing the full thing and I usually do do the Clutch Kit and Clutches with it, but didnt feel the need with this one. Just a slow build, just 54% and Tires and Snorkel.. the 3 Honda 300 basics
After installing a new gear reduction An dirt racer clutches do you need to adjust the clutches ? Like you did on the gear reduction for swamp asses build on his rubicon?
Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear.... Buy a tires gorilla measures 30x10-14 the four tires. Do I need a reduction of gear to Install? and if so, which would be the most apropiate. Finally, is there any risk to my Honda 300 to adapt the reduction of gear?
Do you have any GRs for sale i have a 96 fourtrax 300 4x4 nobody around here doez them or if so they want a arm an leg but im very serious if you have any available im trying to turn 27x10x14 silverback x-lite
SolitudeCustoms what is the tooth count on the secondary basket and do you know what bike that basket came off of, also do you know the primary tooth count and what bike that came off of? Just wondering, thanks.
Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear.... Buy a tires gorilla measures 30x10-14 the four tires. Do I need a reduction of gear to Install? and if so, which would be the most apropiate. Finally, is there any risk to my Honda 300 to adapt the reduction of gear?
Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear.... Buy a tires gorilla measures 30x10-14 the four tires. Do I need a reduction of gear to Install? and if so, which would be the most apropiate. Finally, is there any risk to my Honda 300 to adapt the reduction of gear?
Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear.... Buy a tires gorilla measures 30x10-14 the four tires. Do I need a reduction of gear to Install? and if so, which would be the most apropiate. Finally, is there any risk to my Honda 300 to adapt the reduction of gear?
Finally, a video of someone installing a gear reduction and not just showing it work.
Thanks for the video.
Had to replace the cover gasket on my 300 this was very helpful!
Where did u get your gear reduction?
I have a case with the extra bolt up top, the threads on the clutch are right hand to make lose too
about time someone finally did one of these, i got 3 questions this week on how to do it lol
Yea man, I hope I covered enough.. Refer to this video if you will or want to.
I already did once lol. Next time i take my clutch cover off im doing one too. It seems people can find me but they can find dons videos i hope they find yours too though lol. The only thing i saw that you didnt put in that i always put in is manual new clutches and mainly the springs. I found out the hard way it WILL slip without the springs.
Yea, I really thought hard about doing the full thing and I usually do do the Clutch Kit and Clutches with it, but didnt feel the need with this one. Just a slow build, just 54% and Tires and Snorkel.. the 3 Honda 300 basics
yep plus you arent running huge tires just those 28 ol2s so maybe it wont be so bad but they do pull hard, time will tell.
I cant wait to try them, I got that video uploading now
Do they make a gear increase for higher speeds
No, maybe there is, but not in my aspect of this sport
How is the rear differential holding up after this install? Did you need to upgrade the rear diff at all?
Out of the 14 300's Ive had, I have never blown a stock 300 Rear Diff.
Did u ground the neutral switch plug to start it gear. If so I'd like to know more about it
In fact i am going to share this to the honda 300 face book page and help some of them noobies that are bugging me lol.
So does grounding the neutral wire make the neutral light stay on all the time? What’s the reasoning for doing that?
The light does stay on all the time it allows you to start quad in any gear
For some reason this video won’t play for me??
Same
cottonwoodrebel try playing the vid online instead of the CZcams app that’s what I did and it worked for me.
@@Asalazar77795 ok thank you
What's the 54 percent reduction do...?
After installing a new gear reduction An dirt racer clutches do you need to adjust the clutches ? Like you did on the gear reduction for swamp asses build on his rubicon?
Say man I'm looking for a selectable front diff for a 2000 honda foreman 450S I'm n east Tx
Where did you get the gear reduction
Jesse Williams Jeremy Lee
Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear....
Buy a tires gorilla measures 30x10-14 the four tires.
Do I need a reduction of gear to Install? and if so, which would be the most apropiate.
Finally, is there any risk to my Honda 300 to adapt the reduction of gear?
Where can I get that gear reduction for my 300
how much speed did u lose
Alot, I never got out of 3rd gear tho.
Where did you get the gear reduction?
Im replacing my timing chain, and cant get the clutch to stay while i loosen it up. How did you get the clutch the not move while you loosened it up?
Hey bud do you lose the reverse light when doing the 54% gear reduction?
i lost my neutral and reverse light how did u fix yours
What holds the pins I place after the cup is removed?
late, but if you are still wondering, they are tapered, they are bigger on the backside so they stay in.
would I have to change the gearing in a 89 Honda 300 4x4 with 27in silverbacks
Justin Blundon It would be best yes. You could go with a 18%
Do you know how much a 18% is?
where could i get a gear reduction for my big bear 350
how tight do u put oil feed line
how much speed did you loose
Bryce Sanders Alot.. but i dont get out of 3rd gear.
I was just wondering because between hole is pretty long. Could i get a gear reduction on big bear 350
Bryce Sanders I think Don Ogelsby can make you one but it's not cheap.
Do you have any GRs for sale i have a 96 fourtrax 300 4x4 nobody around here doez them or if so they want a arm an leg but im very serious if you have any available im trying to turn 27x10x14 silverback x-lite
Does anyone know how to get a hold of jerem y lee I would like him to build me a 54% gear reduction
Nathaniel Morris Facebook him. His fb is reduction boss
Could I do this to 2wd?
Yes, the process is the same
no need to i sold my 29.5 ol1 to a buddy fortrax 300 2wd pulls them in anything
Where did you get this kit from?
Alston Rowell .30 sec into the video. Jeremy Lee on FB
Okay kool thanks
SolitudeCustoms what is the tooth count on the secondary basket and do you know what bike that basket came off of, also do you know the primary tooth count and what bike that came off of? Just wondering, thanks.
Enskey the clutch basket gear is 74 tooth off a z400 Suzuki, and the primary is 20 tooth. The primary has to be machined an tig welded.
curtis snow can you weld it with flux core instead
Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear....
Buy a tires gorilla measures 30x10-14 the four tires.
Do I need a reduction of gear to Install? and if so, which would be the most apropiate.
Finally, is there any risk to my Honda 300 to adapt the reduction of gear?
Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear....
Buy a tires gorilla measures 30x10-14 the four tires.
Do I need a reduction of gear to Install? and if so, which would be the most apropiate.
Finally, is there any risk to my Honda 300 to adapt the reduction of gear?
Juan Carlos Velarde Rodriguez I would highly recommend the 54%. It will go in just like the one in this video.
Hello, My honda 300, It brings a tires ITP measures 26x8-14 front and 26x11-14 rear....
Buy a tires gorilla measures 30x10-14 the four tires.
Do I need a reduction of gear to Install? and if so, which would be the most apropiate.
Finally, is there any risk to my Honda 300 to adapt the reduction of gear?
I make the 54% for 425 shipped plus cores
Anthony Carter do you ship to south dakota