How to use a Torque Wrench PROPERLY
Vložit
- čas přidán 19. 06. 2024
- Torque wrench torque specs. Learn to properly use and maintain a torque wrench. Using a torque wrench on nuts and bolts is important to make sure the bolt is tightened to the correct tightness or torque. In this video I show how to use a torque wrench, give a few torque wrench top tips, also go over many questions people have about torque wrenches.
Here is the torque wrench I use: amzn.to/1UYstzW
How to Check Torque Wrench Calibration: COMING SOON!!!
How to Use a Torque Wrench (My Old Video): • How to use a Torque Wr...
OBDII Scanner Review: • BlueDriver OBD2 Diagno...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: czcams.com/users/subscription_c...
-CZcams Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. Copyright 2015 ChrisFix All rights reserved. - Auta a dopravní prostředky
My dad died unexpectedly this year. He spent his entire life working in the automotive industry and knew everything there was about cars. And while he’d always teach me bits here and there so I could get by if I could theyd through to him, there were so many little details like this that he just didn’t really think to teach me of, as I pursued a completely different career away from mechanics. He left me behind so much equipment in the garage and while I know how to use bits of it, a lot of it has been a case of trying it out and googling what I don’t know. Videos like this, Chris, have been *so* helpful and I’m so grateful. Losing my dad has been so hard, but I find a small amount of comfort in knowing that he’d probably be happy that I’ve taken on the bits he taught me and learned on top of that. Your channel has been the biggest help and I’m so thankful.
Your Dad must be smiling seeing you play his toys. 🙏
Nice read , sorry about your loss. My grandfather has alot off tool he wants me too have but it'd been so much bs going on that I haven't gotten them plus I need a garage thats mine and not in a home I'm renting.. me and his son who is in his home since my grandfather is living with my mother because of his sone being on some playing the family type ish I haven't grabbed nothing .. but I well grabbed the items soon and put them in storage until the time is right , until then I'm going to use what I have already bur it's a nice feeling being passed down something especially since the older products are miles better then the new ...
Thx for sharing
God bless you
I’m sure you’re father is proud of you
jesus, bit deep
My dad doesn't even talk to me and I felt this. I'm sorry. Hugs ❤
God bless you ChrisFix, the level of confidence ive reach since i started watching your videos its just amzing
LokotronSPM 0.23 Same here, man. I’ve gained alot of confidence to work on my own car just because of ChrisFix.
I’ve just discovered ChrisFix and excited at learning from this great channel.
@@wokeupandsmellthecoffee214 best of luck to you! ChrisFix is the man! I've learned a lot from this channel and just youtube in general and hopefully you will too!
@@wokeupandsmellthecoffee214 Same! :D
Same here. Replaced a few parts so far, doin rotors and pads next week. Thx Chris
Best auto mechanic instructor on the web hands down. Clear & thorough instruction, quality audio/video production...you rock Chris!
You can use his teachings as a greenhorn and properly work on even delicate parts like cilinder heads, carbon fibre clamped fastners which require only 1.1Nm. He's good, quite good a teacher
As Fred Rogers said, "You don't set out to be rich or famous. What you set out to do is to be helpful." That is what Chris has done. He set out to help people learn how to fix their own cars properly.
Does anyone get that reference?
THANK YOU CHRIS--NEVER USED A TORQUE WRENCH IN MY LIFE--NEVER HAVE BEEN SHOWN HOW TO USE ONE--I'M 64 NOW--THANK YOU CHRIS.
year has passed and still waiting for that torque wrench calibration video...
Same! He probably never seemed the comments about the request :(
sunnyhaibin do i have to calibrate them myself?
I believe it is actually coming out soon now.
802 Garage two months later lol.
Supposedly, I heard/read ARP does that at NHRA events.
hello chris!! im a filipino and lso your fan.. actually im also doing some car repair tutorials spoken in our language so that i could help them a little bit.. im always watch your videos and i learned a lot.. i have no proper education regarding car repairs. i only learn from experience and watching your videos and also searching google.. thank you very mucj
Awesome!
jeep doctor pornhub
Kala ko mekaniko ka talaga haha
gaya gaya lang pala ang gunggong na jeepdoctor na to di naman pala mekaniko tlga
@@randomautist1593 I'm on oil luh I oil in 6i oil I un nsj9 ci
This is how every tutorial video on CZcams should be made. Simple and very informative. Thanks, Chris..
I must admit you are the real deal , out of all these so called “ Online Mechanics “ you are the only one with enough patience to explain how things work , and how to fix them in a very easy way , kudos sir , keep them coming .
One of the biggest things to learn when you start working on cars is not over tightening everything. Tighter is not always better. Newer cars have a lot of aluminum parts and different meters joined together . And another big issue is gaskets , they are very precisely engineered so if they get crushed they won't work properly. It is a lesson you will learn the hard way after breaking bolts and taking twice as long to do a simple job because you broke a bolt or having to do a job over because of leaks. Torque is a mandatory part of working on current cars . Good vid you are great at picking subjects and you give very good advice . Keep it up ,great job.
+680ecks Thanks a lot and thanks for sharing!
680ecks Agreed, I mainly use torque wrenches for things that require 10-30NM of torque, usually timing case covers where liquid gaskets are used, camshaft caps etc. Doing something up tight by hand is easy and is usually okay, but if you can guess 10NM you're doing well.
u gonna do a video on "rundown torque"?
Caliper bleeder valve is a great example
Good friend is a Toyota tech. He says nobody uses torque wrenches. He said he literally has never seen one in the shop in years.
Checks out, my experience with Toyota dealers is they are glorified parts changers and couldn't diagnose diarrhea.
I was a jet mechanic before watching your videos and started playing with cars. Number one rule with torque wrenches, don't drop!!! In the military working on aircraft one drop have to turn them in.
Airdale USN wow didn't know it was that serious!
Airdale USN Yep, it sucks, but necessary to be sure the work is up to snuff. I dropped my 1/4" less than 3 inches to the floor the other day, had to turn it in. Treat it like a glass egg.
Henry lotus, well it kinda makes sense that its that serious. He was working on jets after all, like you know a huge chunk of metal thats getting thrusted in the air by dead dinosaurs haha
I guess you can't take risks with such an important vehicle, thanks for serving our country by the way.
Just as with a motorcycle helmet... any impact whatsoever, it's toast.
*slams service manuals on tailgate*
Also Chris (calmly): This is where I get my torque specs from
That book slam sound cracked me up 🤣😂🤣
LMAOOOOOOOOOOO
When torqueing a bolt, the objective is to stretch the bolt such that the force generated by it is applied to the bolt's threads. This causes the bolt head to compress the two mating surfaces together with a known force. Although unperceivable to the naked eye, bolts do stretch. Different materials have different stretches per given force. In some applications, you want the bolt to stretch more due to its internal structure. Roller coaster bolts, for example, are able to stretch more but are hardened steel whose sheer properties and strain stay within the limit of forces placed upon them. They are very critical and must stay within their design limits.
In the automotive world, the best known torque, of course, is lug nuts. Stretching the bolt using the correct torque with apply the correct force to mate the two, actually three, surfaces together correctly. When the wheel bounces around, it wants to separate the materials by overcoming the forces holding the lug nut against the wheel. Correct bolt stretch caused by correct torque will keep them together within their design limits.
If on a properly installed wheel, measuring the stretch will achieve a more correct force; however, not too many people have such equipment. Torqueing is the next best way and easy to do.
yeah i ain't reading this bru 😩😩😩
@@mwafr I did but didn’t get it😅
I got it, & totally understand. Thank U for sharing. 🙏🏿
well call this a lesson.... thanks dude
Smart affor this 🗣️
Tbh this is my first time seeing torque wrenches and how it works
Thank you for the knowledge!
+tokekkk No problem! Glad the video was helpful!!! That is the goal with all of my videos!!!
ChrisFix do i really need the smaller torque wrenches since the 1/2 drive does ever the smaller 1 do? Also does the 1/2 torque 0-100 or 20-100?
nope the big 1/2 inch ones have a lower limit, they won't do really small torques. What you really need for cars in my opinion is a small 1/4 inch, and a large 1/2 inch. Any more is just luxury for the home gamer.
Another important point is to keep your hand on the handle, or the torque would be off.
I usually click it twice. No sophisticated science/logic here, but being an airline tech myself many top-notch co-workers do this. I would also avoid cheap ones such as those that are made in China.
Delta Air Lines came up with a CBT a few years ago where they say to keep the torque wrench at 10-15% loaded when
storing, not at the lowest setting.
I love it when some pros use impact guns to tighten alloy wheels.
Compared to more popular professionals' channels, your channel is concise, straightforward & easy to understand. And you don't leave the basics behind, which I like. Keep up the excellent work.
That's good advice, also keep BOTH hands on the handle (one on top of the other) IF you must use two hands. BTW, there is no need or reason to click a torque wrench twice. Gary Fitzhugh, Snap-on Tools.
I do a double click as well. I agree almost all pro mechanics do that.
Keith Cassinger If you're using the wrench incorrectly, you're just making it worse. If you using it correctly, you're wasting time clicking it twice. Just because a lot mechanics do it, doesn't make it right. And I outta know, its my job. I'm the torque wrench technical trainer for Snap-on Tools.
Keith Cassinger If you're using the wrench incorrectly, you're just making it worse. If you using it correctly, you're wasting time clicking it twice. Just because a lot mechanics do it, doesn't make it right. And I outta know, its my job. I'm the torque wrench technical trainer for Snap-on Tools
Gary Fitzhugh Well see now herein lies the problem. I am not a professional mechanic (meaning I do not make a living out of it) but i have been working on cars for 35 years. The problem is I just did a another search on torque wrenches and proper use and I get a LOT of different opinions from a lot of different sources. So goes the internet. So... I am NOT attached to doing it 2 clicks. In fact I used to do it once and only once. Then I searched and listened to others. If I could find a manufacturer like Snap on which has this procedure of clicks listed on their site that would be great.
Chris, You are the MAN! I work in an automotive assembly plant and you would be surprised at how many people don't know how to use a torque wrench PROPERLY! I have to tell people over and over that a torque wrench should NEVER be used to remove torque! I may suggest this video to be used in our new hire training. :)
Recently discovered you and you use torque wrenches a lot. I Google how to use a torque wrench.. and of course you're the first result. I'm happy to watch and learn from you, I hope to help myself and others and properly teach them how to do proper maintanence and work! Keep it up!
I love how this guy is thorough with every video he's done or doing. I love it. Keep it up. Great job
Thanks!
@@chrisfix What do you expect from clueless commenters !
Thx Chris. Bought a torque wrench today and out of all the videos i've watched, yours is the most informative! While i'm in the mood for giving praise, i also used your super coolant flush video, on my Volvo S40 T4 (1998). She also says thx!
Keep up the good work, it's much appreciated.
Grow Junkie umm
I was slightly embarrassed when I typed in "How to use a torque wrench," but this was the absolute BEST video to explain it to me! Thank you very much for uploading this!
Everyone has to learn from somewhere!
Thank you, Chris. Within 3 minutes, you get right to the heart of how to set a torque wrench. You're my third website on this issue.
I like how he recommends a product that is *actually* a reasonable price for the average person.
Great video,.. Straight forward, no BS effects to go along with it. Perfect for first timers, or us weekend mechanics - never hurts to get a refresher course- Thx!
I had one favorite maintenance channel and now I have two. You're awesome dude, you explain things nice and you don't waist no time nor try to be funny like many others. Thank you for your Chanel.
I have watched a few of your videos. I really like your presentation style and content.
You present the content as if we know nothing about the subject. You don't assume anything. Which is good, because most, like me, probably don't know anything. That's why we are watching.
You also anticipate and answer all the questions we would like to ask you. You answer the who, what, where, and why. It's a great formula-I wouldn't change a thing.
I hope my reply is helpful to you.
I love your videos. They're crazy straight forward, helpful and they look fabulous too.
Another solid video. You are becoming very thorough in answering FAQ's and providing great tips/tricks which adds a lot of value to your videos. Keep up the great work.
That's what I like about his vids. No bullshit, would donate actually if he had a paypal
+DJDevon3 Thanks a lot man! I do the best I can and I am glad it is paying off in the videos!
+UltraGamma25 Im working on something to raise funds because going out to buy 3 torque wrenches for a video and stuff like that gets pricey sometimes. Totally worth it though because it really adds to the video!
Well explained and detailed!Thanks for the tutorial Chris!All the best on your projects!
46 years old, and i needed this! 🙏💫 I've had a torque wrench in my hands countless times and never even needed it. Lol Now, i NEED to know. My lugnuts that i casually took off and put on over the years, finally cost me a ton in damage from not knowing the proper way. Thank YOU!
torque wrench calibration pls!!!chris thanks in advance.
Yes stay tuned!
@@chrisfix published on September 17 2015 and still waiting
Interested
Chris ?! Any update
@@chrisfix how about a video on how to super clean your cars interior
Awesome video ChrisFix. Best video on torque wrench use.
Thanks.
I'm about to use one in a few minutes, first chance I've had, this information was exactly what I was looking for and very easy to follow. Thank You So Much!
No one explains car problems and how to use tools without leaving any little thing out with the clearest highest quality 🎥 videos than Chris Fix. He is one of the very best.
love this dude's videos. super well explained. keep up the awesome work.
This is a really well done tutorial 😊 I just bought a torque wrench and already feel like a pro 😊🙏😊
Finally! A youtuber who doesn't hum and haw and just gives clear, fast, concise information!!! You are INCREDIBLE!!!!!
To achieve an accurate torque setting, the nut/bolt MUST be rotating when the wrench clicks. If it clicks as soon as you put pressure on it, it may not be fully tightened, as it takes more breakaway torque to overcome the friction and rotate a stationary bolt, than it would if it was already moving. If that happens, you should back it off a1/4 of a turn and retighten it in one continuous movement until it clicks again.
^ This is an important comment. Thanks.
Yes, that's something many people don't seem to realize. They go around the wheel on already tightened fasteners and "check" the torque by having it click, but it's not an indication of anything except if someone forgot to tighten one.
As commented, the critical thing not mentioned in the video is that the torquing action must be done in one smooth motion. If it's stopped before the click and restarted, the nut must be seen to move on the second pull.
If it doesn't, it needs to be loosened up again before doing it again.
what a great comment, yes this is static friction vs kinetic friction, khan academy has a nice breakdown of it from a physics point of view
Good comment. Another thing not mentioned is if the threads have been lubricated with oil, grease or anti-seize, then you may have to torque to a lower setting. I'm no pro, so look it up to confirm, but most torque specs are for dry threads.
Also, I am not sure if applying thread locker to threads also warrants reducing the torque setting. Probably not as much a concern as when threads have been lubricated.
"Where do I get my torque specs?" slams the service
manual hahahaha
Othman Sbawi where do you get service manuals for less than several hundred dollhairs?
Klaxz1 is that some bakerXderek lingo I detect there?
GENTLEMAN RTFM
I know right lmfaooo
@@rhett_talon couldn't help but feel a little like Ave
You’re a GREAT TEACHER! Listening to your video makes me WANT to work on my car.
Thanks a lot! And you should!
Hey mate i just want say the way you explained the how to set it ,❤you went through step by step showing the procress in a few steps was fantastic and i think alot of youtubers could learn a thing or two from the way you explain things. Exceptional job my man and thank you.❤
Thanks Chris for sharing the video on Torque wrenches. clear explanation and precise to the point.Greetings from Melaka, Malaysia.
I have watched a LOT of instructional videos on everything from magic tricks to home improvement. This was, by far, one of the best ever. Well done sir, and thank you!
Every single video he's ever made is 100% top notch. I literally watch his videos every night for like 3 hours lol. Most of them are stuff that doesn't even pertain to me or my current project. I'm almost 51 years old and have a pretty good knowledge of working on cars. Not even joking, his videos have seriously improved my confidence and knowledge of working on my cars. And I've been doing it for like 35 years.
This guy is hands down the absolute BEST there is on CZcams. I bet he gets offered his own TV show all the time. I've never seen anyone as good at this ad him. Love this guy
I like your videos man! They are really useful. Just started working on my mercedes e220 w211 and I learned a lot from your channel. Keep that good stuff coming. Cheers
Glad the videos are helpful!
These videos of yours have really saved my cars and changed how I look at working on cars. I watched so many of your videos I feel like I personally know you and just wanna thank you chris lol keep up the great work 💪🏽
At 2:06, I like how you explain so detail how to adjust the torque to 98 and 101. Very useful.
Hands down you have the most informative videos. Thank you for taking the time to do it right. 😊
Thanks! I am glad the videos are helpful!
You have a outstanding teaching skills! You actually take the time to explain every possible detail there is as if someone had already asked those frequently asked questions man thank you for going the extra mile! Much appreciate your hard work Chris 🤝
Except that he forgot to exercise the torque wrench!!!!! Even automatic click click torque wrenches will mess up and give improper torque if you don't exercise it!!! Read the dang instructions that come with the torque wrench!!!
Outstanding teaching skills will do nothing if the things someone teaches are wrong.
I have just discovered your channel and am blown away by your presentation. Your thorough explanations about tool and what you need etc. Fantastic. I have subscribed and look forward to learning so much from you Thanks.
Your videos are always informative, clear and precise. Keep it up!!
nice video chris. as always, you never disappoint! keep 'em comin!
+tmac9938 Thanks a lot bud!
i love this guy so much. His videos really helped me and turned me into a person that fixes almost everything on his own car. the only thing I struggle with is the imperial system :(
The Imperial system is the true British system before we went over to European metric stuff. America is more British than the British these days in faith and in measurements. I understand 6ft 6 much better than height and weight in metric.
Lol, I was working on my car and borrowed a torque wrench from a friend of mine. Didn't know how to use them properly, but now I know. Chris, you really make owning a car more fun since you can save a lot of money by doing it yourself and it is just fun to spend an afternoon fiddling around with a car. Without your video's (and the internet in general) I never would've bought my '95 Volvo 480 with 320K (kilometers) on the clock just because of the maintanance costs, but now I just do everything myself
I'm glad the video helped you out and i'm glad you're doing all your own work! Thanks a lot!
Great Video ! Clear Instructions right to the point. Thank you, Mate.
Some people are just so good at explaining things. Chris is one of those People that is why he is so good at what he does. Appreciate the quick and easy instructions as always Chris!
My son loves you you are his inspiration he loves watching you and he comes up to me saying "daddy did you know" an then something he learn .you are the best
Just the video I wanted to see.Thanks Chris. I learn so much from you,hope you do a complete engine rebuild video .
Chris, Thank you very much, Just starting out, enjoy working on my own vehicle. Greatly appreciate the In-depth approach you take. Will follow your channel. My sincere best to you and Ty!
It may have been worth mentioning that if you can, you should choose a torque wrench that has the required torque towards the middle of its range, since that's where they're the most accurate. You could torque something to 70 or 80 ft-lbs with either your 3/8" or 1/2" drive wrench, but the 3/8"" drive will be less accurate since you're at the very top of its range.
Excellent video Chris thank you. I lost a wheel on my travel trailer on the highway from Dealer's over-torque. I do my wheels myself now with a Snap-On TW, yes,, expensive but fun to use. Some guys have a calibration check in their truck but I would like to see your promised video on; How to Check Torque Wrench Calibration : -0),
My question was about the extensions but like you said sometimes there’s no choice. I picked up a Husky digital 3/8 drive torque wrench goes from 20-100 lbs/ft which handles everything on my 2 door Lexus. Even the lugs are 76 lbs/ft. I found it at Home Depot on clearance for half off from $200 so 100 bucks with tax and I’m EXTREMELY satisfied. Most legit tool I have- makes me
feel good just holding the nice neoprene handle 👍🏻
I am so happy you made this video because I NEVER understood how you knew your lb-ft torque spec. I am shopping for some tomorrow.
Remember you still need to apply counter force on the head of the wrench so all the torque is in the proper direction. Sure the losses may be minimal but when using extensions it is important that all the force is applied correctly on the nut. This ensures your torque is on the correct plane of the entire nut/bolt instead of pulling away from the head of a bolt.
I have watched your videos for hours. I've learned so much. thank you very much for all the time you put in making these videos. I was always scared to do any car repairs because I never learned about them as a youth. I feel so confident now doing basic maint and repairs. thank you so much. you have great teaching skills and I love that you take time to explain the little details and the why of how to it a certain way. after researching by watching your videos a few times, when I actually go do the work, I'm so familiar with the parts and process that I feel like I've done it several times before even though it's actually the first time. you're the best.
+jawjww awesome! I am glad you are learning a lot!
You are so great at explaining so I understand, and answering my questions as they come into my head. Thankyou chris..great job.
Thanks Chris. Just bought a torque wrench for my caravan wheels. Never checked them before (Doh) but now know how to check the torque properly. Thanks.
Plan on doing my spark plugs myself so this video was absolutely helpful. I bought the wrench, plug socket, and extension. So this is absolutely nice to know. I already feel more confident about it
How did it go, mate? How many times have you serviced your spark plugs and the related components by yourself?
Curious to know!
Best wishes.
I’m planning to do the same and also with my brakes, need the torque wrench and some lubes and I’m all set
Chris, as informative as ever. Great work on this video. Another thing to keep in mind is something called range of linearity. Most torque wrenches are pretty accurate in the middle of the range, but the low end and the high end are less accurate with click type wrenches. So for critical applications, you want a torque wrench whose middle range is within your torque spec (think of a bell shaped curve, 10% on either side is less accurate). Granted, the difference between 95 lbs-ft and 105 lbs-ft on a lug is not critical - just know that if 100 lbs-ft is the upper end of your wrench's range, it's not going to be as accurate torquing a fastener to 100 lbs-ft. That's why it pays to have several wrenches with different ranges. The higher quality the wrench, in general, the better the accuracy throughout the range.
That said, the range of linearity of a beam style torque wrench is pretty rock solid throughout the range. I always use a beam style for my lugs, and only use click style in applications where I can't use the beam style.
Thanks a lot for the added info.
why is it less accurate in the high and low end? a spring has a constant increase in force per inc right? so it should not matter. or does that only apply to the stretching of a spring? just wondering not to devalue your comment
You know those scales that they use to weigh trucks for DOT compliance, or at junkyards? You know, they weigh the truck at the junkyard, the driver dumps his stuff, they weigh him on the way out, subtract the difference and that's the weight he was carrying. NOW, imagine putting a penny on that scale - would it register? No.
That's because measuring devices have range of linearity and except for the most expensive, calibrated instruments (think lab) the low end and the high end have the most variability.
Torque wrenches are, as you say, in general, just a spring, and applying tension at the lowest end (and highest end) is going to have more play. That's why they make torque wrenches geared towards smaller torque ranges (think 1/4" drive) and torque wrenches for greater ranges. You want to use a torque wrench suited for the range you will be working in - but as you get to the "limits" of that range, the accuracy is challenged.
They calibrate them to be +/- some level of torque, but that's only in the mid-range.
Putting a penny on a gram scale will weigh reasonably accurately, but same penny on a kitchen scale, won't.
Thank you for responding so quickly. I get what you mean and i know about significance but am still wondering becouse the example you use is about an entirely different use of a scale. if you have a scale for a max of 500 grams and you use it within that 500 grams it should be reasonably accurate. and you wouldn't use a torque wrench outside of its scale.
In most cases it doesn't matter if your torque is off 4% or 2%. The lower the torque the more important the accuracy. Also, in most cases there are from ... to... values with torques, even in shop manuals.
Thank you for your service to the public by sharing your automotive knowledge with great detail and instruction! 🙏
I truly appreciate all your videos. Thank you so much.
so that is not a hammer?
Defnitily not
It's a 'special tool'
Ahahahahaha😂😂😂👌
Instructions still not clear.
If not a hammer, can I use as counterweight?
You can use it as a pry bar.
I just use one of the old fashioned ones with the dial and the needle (beam torque wrench). I do try and get it as close to the spec as possible but I also partly go by feel as the needle is getting close to the spec that I want. I find these ones kind of cool because you can see as you're getting close to the value instead of just waiting for the click.
I just find it more visual because you can see the value that you're at as you get closer to the spec.
Great tutorial!!! Absolutely wonderful. Thanks a million.
Man I love your videos! Never stop of doing them! You’re the GOAT
Very helpful video. Clear and concise and without being confusing. Many thanks Chris. 👍🏻
you can learn a lot more from his videos then you would in automechanics or from a book and his videos gives you confidence as well. thank you.
+Robert Baratheon Thanks Robert! That is the goal! I try to jam pack every video with the best tips I know!
+beshj what I meant by that was, you have teachers who would have you falling asleep in class and you have the ones who will keep you awake. the way he teaches makes you want to learn.
Been watching you for a few years and just got the confidence to drop the transmission on my VW Golf diesel. Thanks!!
Thank you for making life simple and helping us all save time and money 👍🏻
I was going to take my 2022 Hayabusa to the Dealership for a chain adjustment, which would include retorquing the axle, but now I can do it myself and save money and instead of paying the dealership, I can buy the tool with the sockets and pocket the rest!👍🏻
I just found this channel today and I'm hooked. Makes me more confident in doing DIY auto work I've been wanting to learn along with tools to have & need
Chris fix , you are so good at what you do and you explain that very well. I hope to have you like one of my instructor at my mechanic school. Thank you so much for all those knowledge. God bless you. You are very kind and not selfish at all. You are the best mechanic instructor I have known. You’re phenomenal; you make it so much easy. There is reasons you got more than 10 million subscribers. It’s my dream to be like you one day.👏👏👏
Thanks a lot!
@@chrisfix how long did it take you to finish machanic school if not did you learn by yourself?
Amazing video - clear, succinct and lose that you covered all bases. I'm going to be much more confident now!
I always had an idea of how this is suppose to work but never actually tried or learned it. Now I do thanks to you.
Thanks.
Spot on ... as usual !!
you should see the torque wrenches that are used on aircraft wheels... 4 feet long and go past 700lb-ft range
+Ira Friedman WOW!
+Ira Friedman
We had a hydraulic torque wrench where I used to work. It could go up to I believe 2,000 lb*ft. We used to have a torque multiplier (Up to 800 or so lb*ft) that broke that caused an employees forearm to go into some blades.
+Ira Friedman Should see the size of the hydraulic torque wrenches the engineers use on oil rigs they were good for 100,000lb-ft according to the engineers I spoke to.
+Ira Friedman do you work at Boeing?
***** I work on C-17s with the air national Guard... technically yes Boeings after McDonnell Douglas got bought out
Love your videos man, I always find what I need in your channel. Thank you!
Thanks for making it simple! This is what I needed. Just got my first torque wrench & needed guidance. Awesome!
Thanks for another great video!!
+C Perry No problem! Glad you liked it!
OMG! THANK YOU SO MUCH BRO
That's fantastic! Thank you so much. I'm from Vietnam and I really enjoy watching your videos.
Ur videos are awesome. I do gig work so I want to learn to take care of my own car. Just watching your videos and actually learning things! Very informative thank you 💖
bought one, didnt really know how to use it properly , Chris Fix just told me how!
Glad the video was helpful!
Was wondering how you used those things from all your videos I've been watching recently
Thanks! That was really helpful and easy to understand. And I like the way you demonstrated it. And told us how each individual component worked. And you showed step-by-step instructions. So this means that I will follow you. Thumbs up.The best yet, again thank you.
the clicks the torque wrenches make are SOOOOOOOOOO satisfying, I just want a compilation of torque wrenches clicking
3:26 me when google fails to give me info
Thanks Chris
Glad the video was helpful!
Thanks for all ur vids. I'm learning so much from you. I appreciate it.
Perfect answers to my questions.... thanks Chris
Hi Chris, good video. Just one thing, I would think it more safer for your back if you use a downward motion to slacken or tighten the wheels nuts. pulling upwards puts more strain on your back.
Thank you, it made my life easier.
You are welcome!!! Glad the video was helpful!
Tulio Lopez said
I’m really glad to get FREE info from such a reliable source. Thank you sir!
Thanks Chris! I wasn’t sure how to use these and your explanation was spot on. 👍🏼