8Speed.au Toyota Landcruiser Conversion PRE ORDER TODAY!!
Vložit
- čas přidán 15. 04. 2023
- 8speed.au for all the information on the cruiser kits.
---------------------------------------------------------
0-60 and 100-200 Dragy timer: amzn.to/2IKMQr0
---------------------------------------------------------
Our Must Have Tools:
Car Trim removal set: amzn.to/3oQhsHe
Under bonnet led light: amzn.to/3aaDJLt
Electric Rattle Gun: amzn.to/380Eh41
3/8" Drive torque wrench: amzn.to/34aGzwy
1/2" Drive torque wrench: amzn.to/37gGUPZ
---------------------------------------------------------
Our Must Have Car Care:
Hybrid ceramic: amzn.to/2KlkMuP
Tyre shine: amzn.to/2WcRzox
XL microfiber dry towels: amzn.to/2IShFdC
Wash mitt: amzn.to/3oQM7UA
---------------------------------------------------------
Our Camera Gear:
Ultimate camera/gear bag: amzn.to/2Kj1N46
Action/vlogging camera: amzn.to/37eWawM
Non-vibrate suction mount: amzn.to/3a9vmjy
Wireless mics for in-car audio: amzn.to/3a8C1dH
---------------------------------------------------------
When we're not working on cars, we're watching the Grand Tour!
amzn.to/3qXghY4 - Auta a dopravní prostředky
I'm genuinely proud you've achieved this. It feels like you might actually get the success for all the work into playing around with this stuff for everyone else's benefit.
Thanks man, that’s really nice to say and I know you’ve been here for the long haul! Still can’t wait to get back to building cars!
These are the world’s best transmissions and can make any engine look good. If you haven’t driven a ZF 8 speed - you’re missing out. Well done for doing the work on this conversion - more older cars need these transmissions- they improve response, performance, fuel economy, flexibility and the all important acceleration. 👍😎
Toyota must feel embarrassed
I love the progress. Very informative, great content- hopefully not too much pressure. 👍✌️
Watching your videos thoroughly as using this gearbox swap into a landrover with an LS1 - thankyou for all of the education and display of how clever the Turbolamik kit is, wouldn't even have considered doing this swap if it wasn't for your videos!!
Keep it up!!
After years of saying stickshift was life… and now seeing these 8HP in action thanks to you and the team. I might get an auto in my life one day. Till then I’ll keep learning.
I wish I could get this truck in the us.... Idk if I could get one from Canada. Good job on taking your time! I know the money into it was expensive though it'll pay off when it comes to getting business. 3 weeks ago I went out to Ohio to pick up a 3 ton car with my dad's 2013 Dodge ram with this transmission. I was so impressed! 15mpg ( 6.37 kpl) at 80 mph (129 kph) and I could not believe how well that transmission did! Parked it at 2100 rpm and never got hot and that hemi did amazing! My step mum thought I would blow it up going that fast and I showed how cool it was staying. If I get around to doing a 1uz swap this is the transmission I'm putting behind it!
I just can't wait for the fte kit to come out. Looks great guys
Monumental effort lads. It’s been a delight watching it come together away from the camera. You deserve all the success in the world off the back of this, my only question is will there ever be another slot for junk BMW’s to be worked on around the hundreds of cruisers that will no doubt arrive over the next year or so?
Thanks so much man! You were a massive help in concept phase!
Congrats on the launch all the hard work really paying off. Love it
Thanks so much!! Its gonna be an exciting year. On to the next conversion i guess......
Been following the story and the process, well done to the entire team. You boys are gonna need a bigger workshop to keep up with the demand!
Thanks man, bigger shop and about 10 times the work force it seems ha.
So happy to see this journey from start to finish, starting from the idea to create kits to working out all the problems and launching product 👍
BTW, today I tracked my 8hp70 for 40 minutes with 650whp and then around 750whp-800whp, gearbox didn't skip a beat despite constant breaking and accelerating.
Man, this legitimately wouldn’t have happened with out your help back in 2021! Thank you!
I've been binge watching all of your videos, and really enjoying the journey with all the projects and builds you have, talking through all the challenges so anyone who's considering something similar knows what to expect. I'm hoping one day you'll get to do something with either a Toyota UZ engine or a 120-series, since this build has me thinking about what my GX470 (basically a 120 series Prado with a 2UZ) would be like with a ZF8 in it
Congrats man, you deserve all the success!
It's great to see the stuff you boys are making
11:39 so good you can use 8 gears on low. My stupid hilux 6 speed auto won't go 5th or 6th in low range and won't drop into 6th on the highway until you do 117kph.
Great job guys I know you'll all be swamped with 79 kits but any eta on the 1h kits?
Congratulations 🍻
The more I see these 8hp videos the more I want to do one. I would love to be able to get these kits out and installed here in South Africa.
I think it could work well. Not only for a 79 cruiser, but other vehicles as well. I for one want to do it in my 2 Isuzus
Hope everything is going well with your 79 8 speed
Looking forward to pvs dual cab
Keep up the great work guys
Great work and the vidoes are a lot of fun to watch and have a lot of information packed in them. Helped me a lot with installing a 8hp70 in my pajero. I love this box. Keep up the good work.👍
Great to hear! What the plan with the pajero? What sort of setup with transfer case and box.
@@ZeroTo60Tube I'm running np241or transfercase from a rubicon with 4:1 low range. All this is powered with an m57 from an e46. I use the pajero for snow wheeling in the winter and trails during the summer. Next I plan to do a solid front axle 🙂
Fuck yeah bro, seems like yesterday y’all were putting the 8hp in dans e46. I’m excited
Congratulations Andrew and thy guys for the really nice video 😊
Thank you! 😃
If you start doing 100 Series Conversions, I'll pre-order the FTE kit 100%. Amazing work guys
I didn't understand the demand until you said 550 waiting. I checked and the first 10 are already sold out. Ok, I get it now. Congratulations!
Man the enquiry this year has been incredible. And the crazy part is most people have no idea how good it is.
Very Cool! Been watching from the start. Would love one in my 78. Unfortunately not in the budget for me. Very impressive none the less. Best of luck with the new venture. Im sure you guys will be very busy with this!
Thanks for following along dude. Busy is an understatement. haha
Gday had Lawrence play with my tune
Sierra k24 8 hp
Love the content
Andrew any news on the instrument cluster i want to buy it I just need more themes and you're really smart can we get MHD on board.
Make that 551 !! Love the Mac shifter.
Great Job done!!!! Can you make a kit for Toyota HJ-61.......please ;)
Extremely professional and attractive to details ❤
Now I want to upgrade from my N 80 to a 79 and add the 8 speed, this is great and also close to home for me. Thanks
The 8speed definitely brings the quality of drive up a tonne in the 79s. Had a mate with a new Fortuner test drive this car yesterday and first thing out of his mouth was how much smoother the 79 series was….. seems so wrong when you know when the 79s should be like.
You really deserve this mate. Been seeing the whole process. I’m sure you stand to make a lot of coin from this great idea…
Much appreciated. Its going to be a lot of work and regardless its something we all have a lot of interest in.
Great to see another Aussie company killing it! We’ll done guys.
Did you ever put mufflers on the 4.6 x5 or did you sell that one?
We need a kit for the American 80 series. We have those old busted 4 speeds.
Can an 8 speed automatic transmission fit on the hdj81/hzj80 land cruiser?
Nice set up guys. Must be honest, first time I'd consider owning a 79 🤣
We have had a few people drive it now and say the same thing. It changes the feel of them to drive so much.
True display of what happens when passion meets knowledge
Auto box and control system
Well said. Thanks mark.
Great work
Thank you! Cheers!
What seats are those
Congrats on the 8HP swaps!!! Have you thought of having New Dave as your spokesperson???🤔🤔😊🤗
Yeah just can’t afford her! Haha
Would love to potentially see these offered for the earlier 1hdfte 79 series, you've already got the transfer end sorted so just need another bell housing designed up.
Its coming!
And flex plate and the gimpy counter-weight they use.
I second this. FTE kit is going to be just as if not more popular than the 1VD kits. FTE is heavily ties up by the A442F and A750F transmission due to torque limit.
@@ZeroTo60Tube hassle Dorney for his. I mean you already knocked the f truck out, surely he needs another zf8 in his life.
Is it cheaper if we remove the working in drive through option? Asking for a friend.
Hahah fav comment so far
Hey man, how are things going recently?
Hope things are going well, I know you had a lot of bad luck last year.
Do you still have your N54 cars? Summer is on its way here, and I miss all the cool stuff you were doing with that platform.
All the best!
I have been super busy with a few things. Check out spool street for an update on the n54 situation. I cant talk about it publically. But nightmare would be an understatement. As for that just trying to get back in to a position where i can get building car again. Last 12 months have been a challenge thats for sure.
@@ZeroTo60Tube I remember seeing that update... I really hope that's not what happened to them. 😞
I'm hoping those 8HP swap kits do a lot of good for you and the community. Can't wait to see what you've got coming next!
Hopefully this year is a lot kinder to you than the last
Seeing all these different builds with the 8hp is super exciting! Quick question, I noticed the Aristo in the background...will that be getting a 8hp swap too? 👀
All the best and succes👍😎
yes it is! currently its a manual swap with the 2j. Soon will be 2j 8hp. We will be working on ways to connect the factory shift buttongs on the steering wheel up too.
Rad! Looking forward to it
Have you ever put a zf8 behind a barra in a xr6 turbo?
Not ourselves, but we have 4 barra adapters out already to customers. So should see them out in the wild soon.
Great job guys
Have you done 8HP in the FD RX-7 yet? 😁
Haha. Not yet. But soon. She’s the one on the lift in the background.
I would like to get this auto conversion done to my LC 79 ute, how far down the line would I be at this time?
We are still finalising the production of the retail kits. We will have better info for you in about 2 weeks
Why aren't they available brand new from zf Australia just curious?
Sold under licence to OEM manufacturers. You can buy boxes direct from ZF but it costs millions to get setup. You have to design your own box and software etc.
You can get certain parts from ZF.
Can this be done to Tundra II 5.7L 4x4 as well... the stock 6-speed is horrible
Soon :P
What about insurance? will it impact on getting the vehicle insured and registered . Thanks
Hey mate! You would need to speak to an insurance company to see if it would effect you directly. Its just a transmission swap at the end of the day. With the correct local approval it shouldnt be an issue.
Big congrats guys. Awesome product. More than deserved guys. Dutch regards Nico.
Thanks man! Huge week ahead for me..... might be getting my laptop back.... :P
my 1hz n/a 75 series is using about 12litres per 100k's around town, what sort of difference could I expect with this upgrade?
I couldnt put an accurate figure on it. But it would better. With the 8hp you dont rev the car so much getting up to speed. There is no drive train energy loss once the converter locks. There is a reason most of the euro brands switch to the 8hp, it definitely helps new cars meet emitions targets.
Are the 8spd compatible with the 200 series to replace bunky 6spd
We will start working on a solution for the 200s soon.
Coupla questions: Is it a BMW torque convertor or a billet custom job? Are you using a fabricated brake pedal or a pedal from some other Toyota? Does the software protect the gearbox from dickhead shifts, ie downshift to 1st gear at 80 km/h for example? Does gearbox and transfer case align in factory position for tailshaft lengths? Does the box require full synthetic fluid?
Im sure it's protected from dhead shifts and yes you use standard front and rear tailshafts.
Hey mate. Worth checking out the other videos it answers everything. But in short not changing the brake pedal. It will be an option. But it’s not a requirement. Most people I have spoken to want the extra left leg room. Tcu protects the trans fully. Transfer case is nearly in the same spot. Within millimetres. The brow does require specific fluid.
Can you use a 200series shifter instead?
Yes we can set that up. But i would recomend trying one of these first. Massive difference in driver engagement and response.
When you think about it, its cheaper to buy a whole new GWM Cannon which has one of these fitted standard, then it is to swap one into a LC...
I mean not everyone wants a Chinese Ute as their daily driven 4x4.
Also very different programming.
I love your work guys. Those 8 speed conversions look mint.
I want to really see how this auto performs off road on the tracks steep decents to huge hill climbs in vic high country before I want to swap out out my manual ony 79. I know the high way driving n towing n fuel savings looks great n the work u done so far looks worth the swap. . but I bought my 79 the tractor for off road gearing to work 100% factory set up.. n does great .. but the highway touring is shit so what a toss of the coin in can I have both ways with the German brains 😅 over the Japanese brains 😂
Worth checking out Tj and Mac when he was testing the 8speed in tassie tracks. But in short the trans give you a lot more control when you need to use large amount of torque from the engine. Much less chance of breaking any drive line components that’s for sure.
How about a kit for Prado 120 - 1GR
It’s definitely possible. Just need to gauge interest and demand.
G'Day Andrew, it's been a few weeks since I last commented on your great run of work for the 8HP. I've just caught up on the latest video, even better it seems. I'm a 1HDFTE A750F owner, this upgrade would be the BEST, if I can get a lookin with all those interest/orders,,, 550!!!!!!! amazing. I did note your comments on the lockup and temperatures, a lot more to discuss if I ever get to the pointy end of things I'm sure. I have a manual lockup kit now and it works well for me as I like to have control over the unit where possible. a few questions for you: 1 Does the ZF/TurboLamik allow any gear lockup? More so in 1st Low for hill descents. 2 How can this be programmed/altered/selected? 3 The A750 has the range selector on/across the box, I wonder how you might work this with the conversion? 5 I also wonder how you guys are going to source/supply ALL those ZF gearboxes!!!!!!!! All the best. Dave. If I get to Brisbane in the next 12 months I'll aim to pay you a visit.
Hi David, 1. yes it can be programed when to shift based on pedal position and a few other factors. But you would more than likely simply use a manual shift mode for that type of driving. 2. A few different ways, but again, likely a feature you wont need in the auto mode. Keep in mind it has 8 programable driving modes. 3. Do you mean high and low range on the transfer case? 4/5 We have a plan. Currently have 50 transmissions in stock with another 200 lined up from various suppliers.
@@ZeroTo60Tube Yes item 3,,,,, hi/lo range selector. thanks for the other info'. ANOTHER??? No doubt you have some smart guys on the case of when ditching an existing auto,,, how to fool the TCU/ECU that it is no longer "there", unplug the harnesses, plug in a "Dummy". I'm interested in all this tech side. Thanks again.
hi andrew its glenn in broken hill quick question does all the variations of the zf6hp use the same can signal? just wondering if my falcon zf6hp26 will intergrate into the bmw e90 can signal as the bimmer used a zf6hp19 just trying to see if i can trick the traction control so it does not come up as a fault on the dash any help appreciated the barra looks like it was meant for the e90 cheers glenn
I know some are similar, but the boxes rarely interchange. Even a 6hp21 from a e90 wont go in a x1 of the same age.
@@ZeroTo60Tube yeah all I was wondering is the can the same any way I will let you know in a couple of weeks when I take it for a spin I just want to trick the traction /stability control cheers glenn
Another silly question for you say you have three modes on the shifter as standard would it be a stupid idea to have the ecu recognise when a trailer plug is connected and go into a tow mode? Or way to much effort and should just set that up through one of the shifter modes
I’ll answer my own question probably to much effort but In saying that if there was an in cab trailer brake controller that could back feed a lot easier as they do have recognise feature that senses when a trailer with brakes is connected
3 modes are enough dude 🍻
That may be something the controller can do. In fact positive it can. But will take a fair bit more wiring some relays and all it will be saving a flicking the lever over when you jump in.
We can set them up with the 8 modes. But I’m starting to think people really won’t need them.
@@ZeroTo60Tube thanks for the reply. I’ll stop asking silly questions now and save them for when I have to coin to do the swap 👍🏻
If we're able to source and inspect our own transmission, how much for the remainder of the kit?
It will like be $4000 off for the guys who supply thier own transmission.
@@ZeroTo60Tube thank you
Do you guys use the 8hp 4wd box? Or is it the 8hp 2wd box?
As i thought the 2wd box was prefered but is really hard to get in australia ?
Thanks
We mainly use the xdrive box. However we do now have adapters to convert xdrive to rear wheel drive.
Where do you sell these adapters?
@@Patches-vq8cd www.8speed.au/products/8speed-au-8hp-awd-to-rwd-conversion-adapter-kit
Is there an adapter to suit 1fz & the 1hdfte ?
Not yet, but it is something we will be working on towards the end of the year
@@ZeroTo60Tube think you’ll be on a winner ❤️
Will these fit the VDJ78?
Yes they will.
Would this work for a GX470?
It’s something we are going to start work on in the coming months. The integration with the other electronics is the key. We have the ability to emulate the original auto, just need to work it out.
How hard would it be for you guys to make me the NZ agent for these kits? Do you want me to email you about the idea?
It’s something we will work on later on the year. However any international dealers will be expected to stock quite a few kits. It will be a substantial investment.
Keeeeeeeeen
Soon, yours will be up soon!
Get in quick everyone best shop for 8hp gear
Thanks for the support man!
How can I get hold of you I have a 2001 E46, I got a new Avin navigation, am looking for. Someone to put it in, can you or someone you know. Graham
That is not something i can help with. Sorry Graham.
Do you know of anyone???
Are you guy going to do a run for 1fz
Yes we will!
@@ZeroTo60Tube will be available in a diy kit just the adapter plate ? Shipping to Canada would be crazy for the hole kit
Are you looking at a 200 series conversion next? Id be very interested as my 6 speed is a pos compared to a 8h
Not next but soon! They need one of these so bad.
@Zero To 60 I'll be waiting eagerly, you have 1 kit sold for a 200 already 🤘
Yo, everything good in the Australian neighborhood?
Hey Man, heaps going on at the moment. Just trying to get caught up.
@@ZeroTo60Tube what’s heaps? And that’s great if that means just doing some cleaning and keeping things cool at the track. As of for me, I finally caught the person vandalizing my car but my parents told me to let it go. The person doesn’t park near by anymore but the damage has been done. Hella years of pointing fingers towards close neighbors since I was a kid and it turns out it was some person I never ever met before. Sucks when stuff like that happens. But all in all I’ve been walking my dog and working on my cars whenever they have a problem or two. All in all, give the people who watch your channel a reason to keep clicking man!
@@ZeroTo60TubeI hope to see some more vids soon. Hope everything worked out well for you during the special day you mentioned lately….
Does Brock have a Fan Club yet??? Tshirts for the shop??? We can fix anything but a broken heart 💔t-shirts🤣🤣🤣🤣
Brock needs a fan club!
Found this video from Just Autos awesome, showing 200 series transmission issues, when towing under load...
czcams.com/video/8GN_cqqfEtI/video.html
Thanks for that, yeah that really highlights some issues with the factory setup. It looks like they taking some hints from how the factory BMW 8hps are programmed with how they are tuning the box.
Are you in jail or just really busy
Nearly both..... Been a freaking wild couple of months.
Hi Andrew, how can we contact you? Shop phone number?
Hey mate, i dont promote the number. Mainly due to too many people trying to contact at the moment and then i cant get any work done. Best place is via email. 8speed.au@gmail.com
@@ZeroTo60Tube thanks Andrew, will be emailing you.
I think this channel is running out of content
I know you know, cos you asked about it just after it happened. But search spool street for the channel name.
funny, i was just talk to one of my neighbours about you guys about an hour an a half ago ......... anyway congrats lads 👍👍👍
No way!
@@ZeroTo60Tube yup, he has a 79 an i have an auto 08 hilux i was talking about how i love the auto, he said he'd looked into putting an auto in and while on that topic i mentioned "8hp" and he said he'd been following your build series too, small world haha, then i get home an here's your video waiting, like a stalker 🤣🤣 nah seriously tho well done lads