Hello again, I want Clarification when preparing for the lab test. My instructors say to push the yellow and red buttons in after you ask “can you time me”. Does it matter if I press the buttons in before or after? I don’t want to fail the In-cab over something so simple.
Hey @Ruben B Jr... I'm finally at 160 driving academy in Forest Park and this is my first day. Is it anyway that I can come to the location that you're located?
SAME! And I failed air brake and in cab last week. Been watching video and video. It’s a memorization thing with me. Just freeze when I get in the truck. I can drive well, just can’t remember all these steps. 🤦♀️
I have checked that my air tanks are fully charged to 120 psi I Will now turn my truck off and turn mys ignition to the on position, I will now push in Both my brake knobs in and wait until th air tanks have settled, I do not hear any audible air leaks. With steady pressure on the brake peddle i should not lose no more then 4 psi in 1 minute, will you please time me, I did not lose more then 4 psi in 1 minute. I will now pump down the brakes once the air pressure drops to no less then 60 psi my low air warning light and alarm should activate, My low air light and alarm have activated. I will now continue to pump my brakes and both my brake valves should pop out at approxamitly 40 psi, Both my valves have poped out my air brake system is working properly. DO NOT TOUCH THE VALVES WITHOUT THE PERMISSION OF THE TESTER DO NOT DO ANY THING BEFORE OR DURRING YOUR FOR BADIEM ANNOUNCEMENT AND SAY THE WORDING EXACTLY EVEN THOUGH YOU ARE SAYING THE FUNCTIONS THAT YOU NEED TO DO YOUR WORDING HAS TO BE EXACT WORD FOR WORD NO DISCUSSION AT ALL ONE MISSED WORD IS A IMEEDIATE FAIL!
Hello sir very good and professional job . Ibhope you are good with family. Sir i am from 🇦🇪 dubai. I am from 2004 to still . I am a hord worker and professional driver. Looking for a drivers job . I have uae 16 years experience with heavy bus and light vehicle. Plz sir guide me for this job. How canni apply any trucks or buses compny in europe ????
Good morning. Thank you for your feedback. Yes, I am a family man. I am not to familiar with Europe, but I will see if I can find out something for you.
@@pure_one when both of the valves pop out, don't you need to test them by turning on the vehicle and drive. Vehicle shouldn't move because emergency brakes is applied.
He dident do the static break test at 3psi per min for a combination vehicle he went straight to applied then leak down then emergency leak down. So he missed a step that’s a FAIL
Theses videos are for educational purpose. I did mention the the 4 psi per min. ( This is for combination vehicles ) 3 psi is for Class B straight truck.
In school now. This pretrip is kicking my butt. I'll get it down though.
Be patient! If you have any questions, I'll be more than glad to answer or help with any confusion.
Grizzly that’s what I’m nervous about too the pre-trip. I go for my test in two weeks. Good luck to you too.
@@craigchapman234 thanks I took the test in January and passed! I just obsessed over the pretrip for a good 2 weeks. Memorized it like a script.
@@craigchapman234 did u get it? Any suggestions
Relatable!
what about the abs light on and off for the reset ?
Great! Thank you, Sir.
That windshield is clear asf! I
You are amazing brother thank you
You and Orlando are the best instructors in the world 🔥🔥🔥
Thank you very much!
Same too here
In my last few days at 160 driving academy forest park and these videos are super helpful.
I’m glad they are helpful. Let me know if there’s anything else I can assist you with. Welcome!
Bro I’m in my 2 week
Perfect
getting your cdl is hell smh GOD HELP ME
Good stuff 👌
Thank you!
Going to start getting my CDL training any suggestions to what school to go definitely I like to visit Georgia
I work for 160 Driving Academy. We are across the country. Check us out.
I take my pre-trip soon, studying everyday.
Update: I got my CDL. These videos helped a lot, thank you.
Congrats!@@FXAMARI
Hello again, I want Clarification when preparing for the lab test. My instructors say to push the yellow and red buttons in after you ask “can you time me”. Does it matter if I press the buttons in before or after? I don’t want to fail the In-cab over something so simple.
The buttons should be pushed in before you begin the LAB test.
I appreciate the help. 😁
Hey @Ruben B Jr... I'm finally at 160 driving academy in Forest Park and this is my first day. Is it anyway that I can come to the location that you're located?
Hey @The Crawford Experience… I’m good with it. You will have to get with Terrance to get an approval.
You don't need to mention the abs light?
I wish my instructor was like you mine just gave me papers and i have to figure out by myself
I’m sorry to hear that. Where did you go to school at?
Metropolitan cdl florida :/ couldn’t afford anything better 😅
SAME! And I failed air brake and in cab last week. Been watching video and video. It’s a memorization thing with me. Just freeze when I get in the truck. I can drive well, just can’t remember all these steps. 🤦♀️
@@pattyjiles4258that how I am rn. Did you end up getting your CDL ?
Where in Georgia are y’all located?
We have 2 locations. Forest Park, Ga and Commerce, Ga
I have checked that my air tanks are fully charged to 120 psi I Will now turn my truck off and turn mys ignition to the on position,
I will now push in Both my brake knobs in and wait until th air tanks have settled,
I do not hear any audible air leaks.
With steady pressure on the brake peddle i should not lose no more then 4 psi in 1 minute, will you please time me,
I did not lose more then 4 psi in 1 minute.
I will now pump down the brakes once the air pressure drops to no less then 60 psi my low air warning light and alarm should activate, My low air light and alarm have activated.
I will now continue to pump my brakes and both my brake valves should pop out at approxamitly 40 psi,
Both my valves have poped out my air brake system is working properly.
DO NOT TOUCH THE VALVES WITHOUT THE PERMISSION OF THE TESTER DO NOT DO ANY THING BEFORE OR DURRING YOUR FOR BADIEM ANNOUNCEMENT AND SAY THE WORDING EXACTLY EVEN THOUGH YOU ARE SAYING THE FUNCTIONS THAT YOU NEED TO DO YOUR WORDING HAS TO BE EXACT WORD FOR WORD NO DISCUSSION AT ALL ONE MISSED WORD IS A IMEEDIATE FAIL!
Good job, it shows your are practicing. Very well done 👍
And ur also supposed to let the air settle before being timed 👀
Hello sir very good and professional job . Ibhope you are good with family.
Sir i am from 🇦🇪 dubai. I am from 2004 to still . I am a hord worker and professional driver. Looking for a drivers job .
I have uae 16 years experience with heavy bus and light vehicle.
Plz sir guide me for this job.
How canni apply any trucks or buses compny in europe ????
Good morning. Thank you for your feedback. Yes, I am a family man.
I am not to familiar with Europe, but I will see if I can find out something for you.
#CDL
#Pre
Should have labeled this as in-cab automatic pre-trip
Forgot the last step to test the emergency brakes if its holding.
???
@@pure_one when both of the valves pop out, don't you need to test them by turning on the vehicle and drive. Vehicle shouldn't move because emergency brakes is applied.
You can do that for personal reasons.
It’s not a requirement to pass the air brake test here in GA.
@@pure_one oh ok its required here in the state of MN
Don't say "my" or "we" for the parts. Just say "THE"!!
He dident do the static break test at 3psi per min for a combination vehicle he went straight to applied then leak down then emergency leak down. So he missed a step that’s a FAIL
Theses videos are for educational purpose.
I did mention the the 4 psi per min. ( This is for combination vehicles )
3 psi is for Class B straight truck.
He forgot to mention the fire extinguisher, the three reflective triangles