Why are My Synthetic Dreadlocks Frizzy? - DoctoredLocks.com
Vložit
- čas přidán 25. 02. 2015
- Supply: doctoredlocks.com, Questions: sales@doctoredlocks.com .
Are your synthetic dreads frizzier than a bad perm in Florida? Knock those Frizzies out! Learn how you can have frizz free dreads.
Products used:
Jumbo Braid
www.doctoredlocks.com/hair-ext...
Tail Comb
www.doctoredlocks.com/dollyloc...
For more tricks, tips and hot deals "Like" us on Facebook!
DoctoredLocksInc
For hair extension packages and tutorials, visit our website!
www.doctoredlocks.com/ - Jak na to + styl
As someone making their own synthetic dreads for the first time i can't tell you how helpful this (and all your other videos!) have been. Thankyou so much for sharing
Yay!!! I'm so glad they helped!! Be sure to subscribe if you havent. We are planning on putting out a full synth dreads course in the future. :)
Message received! Thank you so much! :) Warms my heart. :)
Same!
Thank you so much! I know these videos are all really old but they are so helpful!
Glad to hear :)
this is really cool info, and some of the things i saw on this channel i used into making dreadlocks. thank you!
That's awesome! You are so very welcome :)
My favorite of all your videos!! Thank you!!
Excellent!! :) Thanks for the feedback.
thank you so much!!!im watching from turkey this is so helpful i love uu
You're so welcome!
Love it❤❤❤
I love that you made this video. So helpful! What setting do you use at the end for the straighter?
Never mind I see you answered it. Thank you so much for the video! As a newer dreadlock maker this is helpful! ❤
So happy it was helpful! Thank you
Awesome thanks!
You're welcome :)
Was wondering what temp for the flat iron? Love this video I’m getting ready to start a few dreads for accents in my hair.
Start with a lower setting and bump it up if you feel like you need to.
Really cool
Thank you :)
Hi! Thank you so much for these tutorials.
I have used a wet wash cloth and a hair straightener to seal my locs - but they become hard and “crunchy”? Did I use too much heat?
I was wondering what I did wrong!
You are so welcome! It sounds like you may not have had the cloth wet enough. It's the steam that will be doing the work.
Hello I was wondering if you could answer a question. I have just made some synthetic dreadlocks myself and I wondering if I should wash them before I install them into my hair?
You absolutely can :)
Is the Jiffy Steamer Proline Commerical Wig Steamer J4000W the best one to use? Or which one are you currently using?
The J4000 is the one I use now. I was surprised to see the difference between the J2 and the J4000. The J4000 holds a consistent steam spray for much longer, and it just purrs where the J2 can get sputtery. Because I've used both, I'm a bit spoiled by the ease of use of the J4000. It would be hard to go back. If you can afford it, I would definitely try it. Amazon has them on Prime, so if it doesn't rock your socks, you can always send them back - the wig attachment is always separate.
I followed this tutorial, however after a few days of having them installed, they became super hairy and entangled a lot, any thoughts on how to better take care of them?
It's possible they didn't get a good seal set. It's important to cold them until they are completely cooled. Over time they will loosen up. If you send a pic to our text line, I might be able to help you troubleshoot further. Text 929.352.0876
So i can do the straightener method to already finished dreads too?
Yes you can :)
There was something theraputic about this video
Can someone clarify does this also tighten the dreads?
It can help tighten the dread as well.
@@doctoredlocks thank you for replying 🙏 ❤
Can you still wash them ??
Yes you can. You will focus most of your attention on getting the scalp cleaned since the dreads are synthetic and don't require the same care.
How do you make them not so stiff ? Any suggestions ?
You can dip them into boiling water and that will make them less stiff. Just be sure to hold the twist(if they are twisted) and lay them flat while the heat dissipates because the fiber is heat malleable.
@@doctoredlocks you are everything thank you
It worked but Is it ok that they kinda changed shape ? They were straight before now some are kind of bent , is this look ok ? If not how can I put them back straight ?
The shape takes hold as they cool. If there are spots that have bent, just redip them and make sure they are in the shape that you want them as they cool.
@@doctoredlocks life saver thank you !