iPhone 12 Battery Replacement: A Detailed Guide to Avoid non-genuine Part Warning
Vložit
- čas přidán 28. 08. 2023
- 📱 How to Replace an iPhone 12 Battery: A Step-by-Step Guide for Maximum Battery Capacity! ⚡
Welcome to a power-packed journey of iPhone maintenance! In this comprehensive video, we're diving deep into the world of iPhone 12 battery replacement. If you're eager to maximize your battery capacity and extend the life of your device, you're in for a treat. Join us as we take you through each step of this essential DIY process, empowering you to handle it like a pro. 💪
⚙️ In this expertly crafted tutorial, we'll walk you through:
🛠️ Essential tools and materials required for a successful iPhone 12 battery replacement.
📐 Step-by-step instructions to safely disassemble your iPhone 12.
🔋 Pro tips on preserving and enhancing battery capacity for optimal performance.
💎 Assembling your iPhone back to perfection with your new battery.
🌟 Expert insights to ensure you achieve maximum battery efficiency and longevity.
⚠️ Safety first! Remember that working with delicate electronics requires caution. If you're unsure, consider seeking professional assistance.
💡 Uncover the secrets of battery calibration, optimal battery health practices, and ways to make the most of your iPhone's battery potential. Whether you're a tech enthusiast or a beginner, this user-friendly guide is designed to cater to all levels of expertise. Get ready to revolutionize your iPhone experience! 🚀
🎬 Get ready to master the art of DIY battery replacement and equip yourself with the skills that'll empower you to breathe new life into your iPhone. It's not just a repair; it's a journey towards better battery life and top-notch device performance! 🌐
🛎️ Never miss out on our empowering tech content! Subscribe to our channel and hit the notification bell to stay updated with the latest tips, tutorials, and insights that'll transform the way you interact with your gadgets. Let's embark on this journey together! 🌈
If this video proves valuable in your battery replacement adventure, give it a thumbs up and share it with fellow iPhone users who could benefit from a battery boost. Let's spread the knowledge and make the most of our devices for years to come! ⚡
🔗 Stay connected with us:
Instagram:@iDoctorUK
Facebook: @iDoctorUK
Website: www.idoctoruk.com/
#iPhoneBatteryReplacement #DIYiPhoneRepair #MaximizeBatteryCapacity #iPhoneMaintenance #BatteryReplacementGuide #iPhoneTips #iPhoneHacks #BatteryHealth #DIYTechRepairs #iPhoneBatteryLife #TechEnthusiasts #TechTutorial #BatteryCare #iPhoneCommunity #TechDIY #iPhoneUpgrade #TechInsights #DeviceMaintenance #BatteryOptimization #iPhone12Battery #DIYTech #BatteryBoost #iPhoneRepairs #ExpertTechTips - Věda a technologie
Like always you make this job so easier, i watch you on tiktok in the past but i'm glad that i found your youtube channel, keep up the good work!
So you do not require the JCID programmer if you are using the pre programmed flex?
Hi there, just wanted to ask, what tag on flex do yo buy? cheers
So with the tagon flex I don't need the battery coding machine again?
So good
Hi , I got a question to you guys so I got both the qianli tag-on flex and the programmer do I need to program it or does it come preprogrammed, and as I understand from this video booting the phone with a different battery is not needed
Where do I buy these batteries?
So, when i replace the bms, i dont must programing.
so easy track
Watching from India ❤
Thank you brother ❤️
So basically only one tag on flex is needed for all my repairs? Since I don’t need to leave it in the phone and can reuse it? Does the BMS then just restart and count down again as a new battery?
Yes! I keep a couple for each model but they are 100% removable and reusable
@@iDoctorUK😮just seems odd that in any other repair they leave them. But that will reduce the cost of changing a battery significantly if it works without
Fan from India ❤🇮🇳
Thank you for your support 🙏
No need to use reprogramer like JCID? Just the tag on flex?
You need to purchase a tag on flex that is pre-programmed for the iPhone you are using. You can re-use your existing tag on flex but will need to reprogram it to reset the battery cycles and health. The programmer can cost $100+ so a pre programmed tag on flex is the way to go for a personal diy replacement
Will my battery hopefully come set up ready to just install instead of me having to solder and fix it myself?
Without an important battery message, not anymore.
Apple why the hell did you make it so hard to replace an effin' battery.
Learn from TV remote controls and add a gasket to make it waterproof.
Guardando dall'Italia
Ciao!
waching fron india nice video
Watching from Antarctica ♥️
Sick! How do you Get parts delivered over there?
I thought the whole point of soldering the BMS was to avoid the error message - why do you need the tag on flex to be connected first before removing it?
I assume if you solder the BMS to the new battery, but don't add the tag on flex, it will still show error messages?
I have the same Qian-Li tool and tried this process on an iPhone XS summer last year, accidentally broke the BMS board so ended up just putting in a third party battery since it's now not possible to get around the non-genuine battery warning.
The tag on flex will trick the iphone into believing that its the phones actual battery and the phone will read that info from the battery and pair it with the motherboard. The tag on is supposed to link the iphone with the phones motherboard.
@@mechytechy412 thank you, I'm a little confused as the BMS was swapped from the phone's original battery. Is the tag-on-flex capable of pairing a new battery BMS with the phone - in other words, is it unnecessary to swap the flex cable if the tag-on-flex is used? Cheers for your advice, very good video
need programmer to this just tag on flex will not show 100% bettery
I have an iPhone that will keep showing the old data at 88%, I have tried connecting a different battery, rebooting and reconnecting the new battery with the transfered bms board again but to no avail. The new data won't show up whatever I do, have you come into this? I have done many replacements without issues with the same tag on. Thanks in advance for your reply
for ios 17.4.1, you might need to restore battery health through 3utools. install the battery with flex to the board and connect the phone to the pc. if the battery in the 3utools showing 100%, you can reset battery health to 100%
@@zarifhilmy7479 Thanks for your response! It indeed shows 100% in 3utools, how do i reset the battery health to 100%? Can't seem to find any reset battery health option in 3utools
@@blackrepairs5978 flash your device. go to - easy flash - quick flash - tick on restore battery health. ( this step will fully reset your device. should backup first. do this step with installed tag-on-flex. after process is done reboot your phone. check the battery health. once shown 100%, can remove the tag.
go to easy flash - quick flash mode. tick on the fix battery health. this step will reset your device
@@zarifhilmy7479 Cheers man, found it. Is this problem only on 17.4.1 that you know? And is there a way without resetting the device, if a client were to come with a phone on the newest iOS at this point repairing with battery health showing at 100% would not be possible as the clients phone would lose the data..
Followed all steps but no luck. The old battery health is still present. iOS 17.4.1. Tag on flex v3.3. Does anyone found a solution on how to reset the cycles and battery health???
You need to flash your phone.
What is the ideal percentage of isopropyl alcohol to use?
I have heard 70% to clean the phone and 90-99.99% for removing leftover adhesive and that is what I currently use.
100% battery health is much better.
Watching from my phone
is that 70% alcohol? or 95%?
It’s actually 99.9%
wait... wasn't the battery replaced from the back of the phone???? Mine back glass is broken i thought need to fix that before i change battery haha
lmao i thouigt that too
But the battery already come with that conector
Most will unless you specifically buy it without the bms. The purpose of this video is to avoid the non-genuine part warning
@@iDoctorUK thanks sensei
Followed all the steps but didnt get 100% BH
No need worry may be he don’t show us battery circuit reprogrammed
@@LIVE_FOR_TRUTH86 Yes, you are right. He do not showi battery activation and battery board reprogramming for which you need aditionaly equipment.
Thought you needed a special tool to program the battery
You needed a programmer for the previous tag on, these new tag ons are already pre-programmed so no programming required.
where can i get new tag ones from? The ones that reprogram by itself?
I did exactly same, step by step, and my condition isn’t 100. It’s 80% as it was before repair. Any ideas? I have used tag on 3,1 version if that’s important
And I had no message about battery :/
Try put it in 99%
@@freshboypr by using qianli device and software?
Where do I buy these batteries?
Where do I buy these batteries?
Where do I buy these batteries?
You can buy them from different vendors / different brands. I get mine from injured gadgets Xcap brand or from gadgetfix . They have no welded needed as well.