LED Switchback Blinker Overview & Install - 5th Gen 4Runner
Vložit
- čas přidán 22. 08. 2024
- In this video I compare the LASFIT LED Switchback Blinkers with the 4Runner OEM bulbs and provide full installation / blinker replacement instructions.
Switchback Blinkers:
amzn.to/2MZXBoo
Low Beams:
Low Beam Bulbs: amzn.to/375ZvgT
Fog Lights:
amzn.to/3zOlHZ0
Backup Lights:
amzn.to/2RYwZ8O
#Toyota4Runner #5thGen4Runner #ytmikec - Auta a dopravní prostředky
Great video Mike. I enjoy your 4Runner content a lot. Thanks for sharing!
Just replaced my halogen with the same Lasfit switchback with my 12 year old son helping! Your videos are helpful and awesome! Thank you 🙏🏽
Glad to help!
It's easier if you just rip out the wheel well liner to make room for tires 👌
I got the same ones, about to install them now, thanks for the help! They are $50 on Amazon now.
Anyone else with a 2023 4Runner, these will hyperflash once the blinker is on for about 1 minute. Hopefully someone comes out with an anti-hyperflash for the newer 5th Gen 4Runners. They are going to change the 4Runner next year so hopefully someone still gives new 5th Gen's some love.
They just released an updated T3 version. I'll be installing them today. Stay tuned
new video ready for this? did it work?@@project_poor_runner
@@WizzD Yep no more hyper flashing, the video is up on my Instagram under the same name
Great video! most helpful one i've seen!
Explained well and super easy thank you
I bought the previous version of Lasfit bulbs for my 4Runner and the hyperflashed inmediatly so I installed resistors and now the work just fine. Now I see this 2023 version promising they could fix the mistake without the resistor needed, but I see they measure the time they do keep working as should before heating and presenting the error again. My question to you: Do you think that a resistor would keep my actual bulbs from getting heated better than taking them off and installing the new bulbs, or the new version of the bulbs T3 would protect better than the resistor?
They make is so damn hard to replace bulbs on 4runner.
I like LED's, but brighter doesn't necessarily mean safer, in fact it can be the opposite by blinding glare for other drivers.
I agree with headlights and fog lights but I can't recall a time I felt blinded by blinkers. I like the increased visibility they offer when turning.
Hey Mike thanks for clear video and install. Did you do the rear blinkers? How much are the headlight LEDs.
Haven't done the rear but I might get a set. Stay posted!
Here's a link to the headlights: amzn.to/2COjKRe
And here's a link to the install: czcams.com/video/aJYuSB5W6JM/video.html
I just installed it like you did and the lights blink fast like if I’d have a burned turn light. How can I fix this?
Thanks for the video. I need to swap mine out soon.
Thanks for this video, Mike. What a PITA, but worth it.
Thanks for the video! How do you replace the emergency hazard light switch on the console?
When the engine is on and you are in DRL or the mode just below the low beams, what color are these LED's/are they on? Thanks!
White
Just installed some on my 18 4Runner and everything works fine except they do not switch back, just blink amber. Any ideas what could be causing this?
Very good video! Thank you..
Hi Mike, great video. When you ordered the LED switchback bulb, did you select the Standard or CK socket type? I have a 2015 Limited and hope the socket type doesn’t change for different trims.
Not sure. Probably standard. Trim shouldn't matter
Do they work on a 2022 4 runner limited with out hyper flashing?
I’ve got mine, same brands but they hyper flash. Any way on how I can fix it?
I put these in and they fast blink and the white light never comes on. Any ideas what's going on? I bought them directly from your link. Thanks in advance
You could try flipping them 180 degrees in the plug but sounds like either they are defective or maybe your 4Runner is a newer or older model than mine and there is some sort of decoder issue? I've had zero issues with them on my 4Runner, FJ and Tacoma though...
Mike, will that same bulb work on a 2013 Toyota Tacoma 4WD vehicle, I looked online and it's a little confusing, BTW great video, thanks for your time and effort.
My guess is that it would but I don't know for certain. If the cable adapter looks similar I bet you're good.
Thank you
Did you do the rear turn signals?
i clicked the link and it says they don’t fit my 2018 SR5, any reason why it could be saying that?
Not a clue... seems to me they should work. No major changes from 2017 to 2018
Hello, I have a 5th gen 4Runner and repalced all my lights with LasFit Led Lights. I didn't go with the switchback for front. I have the LasFit 7443 Amber LED's for Front and LasFit 7440 LED for the rear. I now have a hyper flash issue. I tried to switch lights around to see if that would help with the issue and I'm still expierencing the same. Can you recommend any helpful advice, any is appreciated.
The issue didn't present itself until I switched out he rear lights with LasFit LED's then I got the Hyper Flash. Before then I had no issue with the front lights whatsoever.
I figured it out. I disconnected the battery for a few minutes then applied power. I guess that gave it time to reset itself. Now it runs great.
I guess I spoke too soon, after running my lights for a while. The hyper flashing comes back.
If your 4runner year is 2021, that’s why. Apparently someone talked to the company and it can’t work for the new year models
@@ben380z I have a 2020, 4runner
Any hyperflashing? Planning on getting some for my Mazda
Hasn't been an issue for me
Is it possible to transform a 4runner limited 2010 to a 4runner red pro 2020 with all the new features?
You could swap out a lot of parts and get close but it wouldn't be worth the effort. The 4Runner has great resale value so if you want a TRD pro I'd just sell yours and get a pro.
Were do I get all the parts of the new 2020 still works for me xD ?
are those the bulbs with or without the hyper flash??
They are an anti hyper flash bulb
Damn, Amazon doesn't have these on Prime.....☝️to the Ebays!!!!!
excuse me? how about the rear turn signals?
Is there a switchback kit for tacoma 3rd gen?
I don't know but I'm looking into it. I've really been impressed with these so far and would love to get the same on the Tacoma!