Arc Billet Aluminum Flywheel: How To Install
Vložit
- čas přidán 28. 07. 2024
- Hope you enjoyed!
********Disclaimer********
Please do not try to re-enact or recreate anything you see in these videos.
Guido does not take any responsibility for injuries or equipment failure created by doing so.
ALL GUIDO CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
********Disclaimer********
This is a older video so info may be a bit off! Go easy on me lol! Check out the newer videos here! • Mini Bike Videos
#sub2guido #minibike #arc
Blitzz channel • Video - Auta a dopravní prostředky
Hope you enjoyed!! Make sure to like and subscribe!!
This is a older video so info may be a bit off! Go easy on me lol! Check out the newest flywheel video here! czcams.com/video/T_EaTN4aY5Q/video.html
I just got my flywheel and rod in the mail yesterday! Great timing!!
Can you run a billet fly wheel on a stock cam?
Very useful video
yo what exhaust is that
You should get the clear valve cover for the non hemi! I think it would look awesome and make the engine look more “custom”. It’s on go power sports
Yeah I was going to get it but when the motor starts up all the oil gets on it and it doesn’t look very good lol. This is a older video but I now have the billet aluminum one
And one more thing you never showed how u got the bolt to spec I know it’s 75 foot pounds but how did you hold down the other side of the crankshaft
I actually didn’t need to hold down the crankshaft. The nut just tightened for me.
I had the same issue, I didn't have anything to hold it to tighten it down.. I ended up using a screwdriver, stuck it in between the fan/fins part of my billet flywheel and did it that way.. not sure if that's right, or if it tighten right either.. but my torque wrench clicked and it seems tight so we will see 🤣
Yes this is a good how to video but just one note when you go to tighten that nut back on that holds the flywheel in place I've heard you should use a Torque Wrench for that and Torque it to 54 Foot Pounds. Guess as a safety precaution to make sure it's on there real good. I'm about to order myself one of these as well and install it on my 196cc Mini Bike Engine but can I ask you where you got the LED headlight from ? I will need some kind of lighting kit and a way to power them once I install the Billet Flywheel and I have no clue who sells them ? Thanks !
Thank you bro!!! Yeah off camera I torqued it down to some specs I found on some forms. They sadly discontinued my light. I just made a light set up video recently you can check out👍🏼🤙🏼
@@Guido19 how do you torque it down if it moves
If the crankshaft moves
@@bonquishadernan5404 sometimes it actually won’t. On my dads when we installed it and torqued it down it didn’t move. On mine I put a vice grip on the clutch and held it while I torqued down the flywheel
@@bonquishadernan5404 tightly wrap a nylon strap around the flywheel a few times counter clockwise and hold on to that while you tighten the nut down I just did it on mine like an hour ago it worked great.
Is there anything else I can use instead of grinding compound
Unfortunately I’m pretty sure you have to use grinding compound.
Is it mandatory to use a torque wrench when putting the flywheel nut back on?
Yes I would highly recommend using one for sure. In this video I didn’t I just use a impact gun and just impacted it on there and it has held up great and no issues. But if you do torque it you will need a tool to hold the crank so it doesn’t move
@@Guido19 alright thanks man
Do you know where I can get a flywheel puller that works on a 224?
Any 212 pull start should work as I believe they are the same size but you can also look up 224 pullstart
@@Guido19 no, a flywheel puller. Used for removing a flywheel
@@DatHondaBoi223 ohhhh okayyy lol. I thought you were referring to a pull start cause believe it or not but a lot of people call it that😂 I actually have one I bought from harbor fright and it was $20 and it works really well and it’s adjustable.
@@DatHondaBoi223 this is kinda what I have www.amazon.com/Orion-Motor-Tech-Bearings-Flywheels/dp/B084SXLVK4/ref=mp_s_a_1_5?keywords=pulley+puller&qid=1659903671&sr=8-5
@@Guido19 thanks man! Appreciate it
Where did you get that flywheel?
Gopowersports
They should make a torque impact anyone else agree so you don’t have to hold it down with anything
Exactly cause it’s pretty annoying
Btw the gap is 3 business cards
You can also use a fuller set too and it will tell you the correct measurement.
Is the gap supposed to be .3 or .6?
@@rykerinthewild1155 .3 I believe
Are you still governor
Nope!
@@Guido19 what ur top speed
@@kaidyncalairo8652 I’ve hit 62mph
@@Guido19 you cam and rod or stock
@@kaidyncalairo8652 in that video it was pretty much stock but now I’m fully built stage 4