MASON C-RE Pure Epoxy Chemical Anchor - On Site Tensile Pull Out Test

Tensile Pull Out Test of Reinforced Bar installed with MASON C-RE 585 in Grade 35 Concrete. Embedment Depth of 9D.
Tested & Approved with:
European Technical Assessment Certification
4 hrs CSTB Fire Resistance Tested
HDB Material List - Singapore
Ultimate Performance Tested by SETSCO Singapore
KMITL Thailand Tested
High Viscosity, Long Working Time
Applicable in Cracked and Un-cracked Concrete
Damp, Wet and Under Water Holes Applicable
High bending strength 47 N/mm2 acc. to EN 196 Part 1
High compressive strength 137 N/mm2 acc. to EN 196 Part 1
High Chemical Resistance
Non-Shrinkage, Low odour
Resealable UV Resistance Hard Plastic Cartridge

[@muhammadfaheem822]

Thanks

[@rkan2]

Not a good idea to be holding the hydraulic line...

[@raffiehydermirza1803]

Pressure grouting?

[@ajayjagotra6603]

Help me sir yeh test sikha dijiya

[@sulmansah3622]

what is the brand product name of the epoxy ?

[@ashwinneupane1239]

Good gays😂

[@jerrytucker9004]

Oh Stop! You are supposed to read a calibrated hydraulic pressure gauge to determine if the rebar you are pull-testing meets a designated pressure. You are NOT to destroy the rebar or the concrete as you did in this video. You obviously have no experience doing Pullout-Testing. Also, why didn't you put a fresh coat of yellow paint on your hydraulic ram before doing this video? It's ugly and pitiful looking. Why aren't you wearing gloves for safety? When is the last time you had a manicure? Geesh...

[@muiztvhilti1141]

Mampir pemula kk....sama2 ker ja di bor nya