Video není dostupné.
Omlouváme se.
how to bleed brakes on a mountain bike - Magura MT Trail Sport
Vložit
- čas přidán 1. 04. 2021
- how to bleed brakes on mountain bike - Magura MT Trail Sport.
Torque specs (Check your manual for other brands)
- Rear bleed screw - 0.5 N.m.
- Brake pad bolt - 2.5 N.m.
- Lever bolt - 0.5 N.m.
"Stay safe and enjoy the ride" -- Rgez Mtb
Nice film. No unnecessary banter ...just what you need to know.
Thanks!
Another blockbuster how to tutorial. Way to go RGEZ MTB.
Ang galing. Interesting..salamat po sa pag share. It would be very helpful to those who needed this. God bless.
Ive have tried this process so many times but still didnt get the right lever pull & brake bite.
I suggest you do this procedure but afterwards, you have to do the suction process at the lever.
I was even thinking my magura mt7 pro is defective since i could not get the correct lever pull at the rear brakes. The front brake lever has no problem, i tried switching it to the rear but still has not enough lever pull/bite.
Maguras are really great brakeset 👍
Enjoy your ride & be safe always 😇
With my setup, I transferred Magura brake into new frame, cut and bleed using the same process, works like a charm. If your MT7 is under warranty try contact your Magura or authorized LBS.
I had the same problem with my rear Magura MT7. The trick that worked for me was to elevate the front of the bike to a vertical position relative to the rear. Then squeeze the handle. You'll notice the increased bite. While awkward you can then do the suction process while the bike is vertical. I had to do this twice, but fixed the brake issue. I think air gets trapped in the longer hose assembly and raising the front of the bike forces the air bubbles up to the brake handle where the suction method can be successful.
Is it effective if I don't lift the motorcycle every time?Or is it okay if I do it once and then no more?
I am sorry if there is anything strange about the sentence, as I am translated by a Japanese
Its interesting video. may bagong kaalaman
Galing naman salamat sa pagbahagi ng video na ito.
Ayus paps.sakto need ko magbleed .ng palit ako ng rear caliper ng mt trail ko.ginawa ko ng 4 pot 😁
Thanks lods
thanks for sharing..daming kong natutunan about sa bike.
Not a magura fan pero nice din ito pra aa mga gusto magbleed ng brakes nila na mahura...nice vid paps
Salamat bro 👍
Ganyan pala un.. thanks for sharing lods
Ang ganda! Love the color RGEZ!
Thanks for this tutorial RGEZ.
Nice video sir! ang ganda ng brakes niyo may natutunan din ako sa magura ah pero next time ang blbleed ko shimano pa lang muna po
Tnx bro, madali lang mag bleed basta may bleed kit.
Parehas tayo ng brake ganyan pala ang process pag bleed.. may kaalaman ako nkuha
Madali lang process, matagal lang ang lumabas ang bula.
nice tutorial..its a big help ..thanks for sharing
Nice vid bro. Di ko pa na try mag bleed ng magura. shimano at sram pa lang.
Tnx bro, pareho lang procedure, sa torque lang siguro nagkaiba?
Amazing and interesting too, thanks for this video
Yown may natutunan na naman.. Nice sir.
Tnx idol 👍
Interesting tutorial, thanks again
impressive! thanks for this tutorial,,,
What type of pad compound is the MT Trail using? Resin?
The Magura MT Trail uses organic (resin) brake pads: 9.P Performance for the front and 7.P Performance for the rear
awesome job bro... it would be very beneficial video who loves biking. #enJHOYlife
nice one idol . ganda ng magura brakes
Tnx idol. 👍
Watching bro. Yap I only use Magura blood or royal blood as well wala ng iba. Super
Pag-ginamitan kasi ng ibang parts, ma-void ang warranty, sayang naman yung 5 years warranty.
Correct bro. 8yrs na MT6 ko magura blood pa din gamit ko bro hehe
How have these brakes held up? Would you say they are worth getting, I currently have the budget Shimano 4 pots are they better then them?
For awesome modulation and smooth braking, the Magura MT Trail brakes are a top pick, especially if you upgrade the pads. But if you want raw power and reliability on a budget, stick with the Shimano 4-pots. I have Shimano 4-pots on my other bikes too, and they’re solid.
Very nice. So useful! 👍👍👍
Thank you! Cheers! 👍
Ayos sa vid
Appreciated lodi.
Good day bro. If you don’t mind anong brake adapter mo sa harap? Salamat in advance bro..
Shimano gamit ko bro, 203mm Post Mount. (SM-MA-F 203 P/PM)
Support kapadyak
Salamat bro, much appreciated ang support. 👍
Good day bro, tanong ko lng bro wala naman akong na kita na bubbles. Anong ibi sabihin na bubbles? Thanks in advance
Di masyado nakita sa video, may naka pasok na hangin sa loob, maliliit sya, kailangan palabasin para di maging malambot pag preno. Salamat Zion sa Pag dalaw
Nice video.. thanks for sharing..
Thank you too 👍
Nice vid tutorial idol. Thumbs up!
Tnx idol 🤘
nicely done bro...
Thanks bro ✌️
Nice! Bro, if don’t mind bro paano mo install yong rear calliper mo? Thanks
Itong setup ay 203mm rotor, kailangan mo ng bracket na pang 203mm, yung model ay magura QM9. Bolt-on mo lang yung caliper pero wag mo muna higpitan, press mo yung brake para mag center align ang caliper, tsaka mo higpitan.
Thanks for sharing 👍
Welcome bro 👍
Ayos idol..
Tnx 👍
First bro
Legend! 👍
I did the same thing but I didnt get any leaver pull:(
It took me longer than the video. Need to remove all the bubbles from the hose. Also need to flick the brake lever from time to time, it helps remove the bubbles too, but do not press all the way.
Brake it to me gently