$5 Axe Restoration
Vložit
- čas přidán 9. 09. 2024
- My Premier Project Plans: paskmakes.com/...
My Free Plans: paskmakes.com/...
I couldn't pass up the challenge of an axe restoration project when I found this old, neglected axe head at our local market. At only $5 I thought it was worth a go! That was two years ago and it's taken me until now to tackle it. The handle was made out of a piece of reclaimed Jarrah which is a very hard Australian hardwood - I'm not sure of it's flexibility but I did a bit of a search and found that axe handles here have been made from it in the past. I don't have any Hickory or Ash so Jarrah was the best I had.
I also added a leather grip, that came out great considering I just went for it! I used an old belt to keep the reclaimed theme going.
It was kind of a big deal talking to the camera for the first time - we will see if it happens again!
Hope you enjoy the video and as always I'm happy to answer any questions. Please bare in mind I'm no axe handle expert but I've made a couple now and still learning.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.thre...
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinp...
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia
the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. czcams.com/users/postUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.
wow he works so fast
I wished I could get things done that quick!
Great channel! Not only do you do resurrection, you also do bringing back to life! That jarrah looks a lot better without the green paint, too!
Thanks Steve! :)
The beautiful reclaimed wood you have access to is insane, in my area it pallets and framing lumber for the most part
The Camphor Laurel, used in most videos, is an invasive species to Australia.
They are fighting the invasion by cutting it down and making good use out of it.
If you are in North America the Norway Maple would be our version of an invasive, don't know how good it is for wood working though. Ask Norway.
Meanwhile our Sugar Maple is wreaking invasive havoc in Norway, but they get Maple Syrup from our tree, sorta like a bonus.
Honestly one of the nicest restorations I've ever seen. Good work Pask!
I kept saying to myself "why is he bothering with that? I have axe head in better shape that I'm not messing with!". Nine minutes and twenty four seconds later I'm absolutely amazed and thinking how beautiful! Thanks for sharing, it was my pleasure watching!
Of all the axe restoration videos i have seen some one finally put a perpendicular metal wedge.
You don't need em
@_ David _ All of the metal wedges I put in just split the grain of the axe handle, and somehow make it looser.
yeah but head is upside down so does it even matter?
The upside down head gave it a special look, wich is good because it's now unique compared to all the other axes☺️
That is one beautiful axe, you've done there. love the handle design, very good craftsmanship.
Thank you very much!
It is so cool seeing someone put so much effort and attention into this kind of craftmanship. I was amazed by you ability to have both such a beautiful finished product and so much effort put into detail.
Old tools are always worth restoring, even if you have to put $200 of labor into a $20 item. It just feels right somehow.
Yes I agree Dwight! I don't think of my time as labor when I'm doing something like this though, it's all pleasure. If I'm making something for someone then that's a different matter. :)
Heck I'd probably find s way to restore it fro $15. Vinegar for the rust and then some for preventing it from rusting again. Wood stuff I have a ton in my garage already
Not to mention, that old iron will always be much more reliable than the one forged in our days.
DwightMS1 ohh so true.... I bought an ax to restore and I put more time and materials than a new one would cost but, I’m proud of my work and best of all didn’t send it in the garbage
Sometimes I think people thumbs down a video just because they can. This video was really cool, I love to see old items brought back to life!
Absolutely beautiful restoration, always love a handle thats curvy in all the right places. That being said there is a reason axes don't tend to have wraps on them. When you swing an axe your dominate hand slides from the head down to the bottom of the handle meeting your guiding hand. Which means you want a nice smooth surface to slide down, if every swing your hand suddenly stops at or runs over the leather you won't have a very happy hand. It might possibly work at the bottom of the handle where your guiding hand grips, as that hand does not move at all. Also you want the bit (cutting edge) of your axe to be somewhat rounded, as it was originally. This is so that when working close to the ground, splitting or limbing for example, the bit is thicker and less likely to chip. A very sharp and thin bit is to be used exclusively for felling, and a rounded bit for general work and use. That is why double bit axes have one felling bit, and one work bit. Thought you might want to share in the knowledge, keep up the good work!
Wow what a great comment! Thank you! I can see what you're saying about the wrap - makes perfect sense. The reason I did the wrap was for aesthetics and it was something I wanted to try - to be honest I already have axes I use so this one will probably get very little use and hang on the wall. Interesting info on the cutting edge, especially the double bit axe. I've never had a double bit axe so never thought about how they work, makes sense. I'm not sure I changed the shape of the edge all that much though. Thanks again :)
What a great find Pask Makes was for me! Won an eBay Auction on a Broad Axe Hewing Head that is about 113 years old and browsing CZcams for restoration lessons learned. Thank you for the share and I plan staying in touch, Casey
Thanks Casey! :)
Wow! That’s a beautiful axe! Great job! I always enjoy your videos. Thanks for sharing.
For many people, this axe was definitely good for the garbage, but after restoration, it's now a wonderful tool ready for (at least) one century...nice job, thanks for sharing
Thank you! I'm sure someone else may have fancied the challenge but 99.9% of people would not have given it a second look - it really was a mess!
Pask- it’s a plumb.
Me- That’s a rusty axe you genius.
HAHA!
I will never use an axe in my life. I didn’t even know what a plumb ace was until now. I just love watching your restoration videos. Keep up the good work. 👍
Very nicely done, I wish I had your talent as I have a number of Plumb 3.5 lbs Champion heads, that was my Grandfather's choice and he was a representative!!
By the way, don't pay any attention to those that try to tell you that you have put the head on up side down!!!
Thank you very much! You should have a go at restoring those axes - it's a fun project. I'm still fairly confident I put the head on the right way - I've explained my reasonings in other comments.
Thank you! I am now convinced you are right as there have been too many comments confirming this. I probably looked at too many images on google and saw on some what I thought was the beard of the axe on top. I'm still a little confused why the eye on my axe was tapered in what would be the wrong way though.
A famous Phoenecian mathemetician scholar once said that, "Genius is but the ability to focus on the task at hand." If you can do that you would be amazed at what you can accomplish.
You probably did it right. As you said the eye was larger on one side. It's possible the axe had been ground down too much over the years, favoring the bottom lip too much. I have 2 axes from my grandpa that are exactly that way. The edge is lopsided from over grinding on the bottom lip. I'm going to try to restore them like you did. Your handle shape is gorgeous. Really nice look to it.
because some guy wielded a steel rod inside of it then you filed it out more than likely. Don't worry, lots of guys hang head upside down and they should know better already ;) Only tips I would have is try hanging lower down on the shoulder and never use steel step wedges
Wow what a good job. The leather strap was perfect Finishing Touch gave it that great old world look
ugh i hate when people weld metal pipes for a handle and ruin an axe like whats so hard about going to the hardware store spending $10 to $20 on a hickory handle and putting it on ya know what i mean you did a beautiful job btw keep up the good work and cheers from Idaho
Thank you! I agree! :)
This is a good example of being resourceful and recycling at its best.Good job mate.
Thank you Tony! :)
I have to say that is beautiful.
I actually like this particular head upside down. It makes it look like something other than a nicely restored...but worn out axe head!!! It gives it sort of a Medieval German War Axe look.
the wood is so beautiful finished..and great work with the leather handle part...looks like a piece of art...
it made me feel good to watch you fix that old axe new again . we need more men like you.
You are a true craftsman!
Thanks! I'm not sure about that though - just giving it a go.
Pask Makes I imagine that's how many craftsman begin. Just giving it a go.
Wow, I really love the colors on the finished axe! Probably one of the coolest axe restoration projects on youtube if you ask me!
Very cool handle but the only problem is that the head looks like u mounted it upside down.
Thanks! You may be right but I had good think about that and the eye was larger one end than the other, so I obviously put that at the top. Also the shape of the edge would have been too open pointing upwards. I did look at different style of heads on the net and found that there were some that looked right with the way I mounted it. I'm still not 100% but I think I got it the right way.
Pask Makes, All of my Plumb axes (3 of them) have their logo on the right face of the head, as such, I believe that yours is hung upside down. Still a beautiful axe, and a wonderful job on the handmade handle. I've just today found your channel, and have decided to subscribe.
Thank you! I'm still not certain and it's good to have some more input, but that was something I thought about too and using google images I found Plumb axes with the logo on the right face and some on the left face. There did seem to be more the same as your three axes though. I still think overall I fitted it correctly as the edge would have been too open the other way, but as I said before I'm far from certain.
Pask Makes If this forum: www.bladeforums.com/forums/showthread.php/1066763-Plumb-Manufacturing-Thread
is to be taken into account, then perhaps mine are a bit rarer than I thought. All of the ones on this forum seem to have the makers mark on the left side.
Agreed that the head is on upside down. Having said that, very nice work and I wish I had your skills in the workshop.
I love the sounds when the videos are sped up in these restoration videos
I think it looks gorgeous even if the head is upside down. I'd mount it on a wall.
Thank you! That was always the plan but I still haven't done it yet. :)
I can’t believe you put the head on upside down, is that because you are “down under”.
I assume the hole is cone shaped the wrong way. That is why it was messed with from the start.
@Mr Cabot Mate what is your problem, it's just one of many projects, it's not that important. I've never set out deceive and honestly don't think I have. You seem to be on a mission to make out I'm a fraud or something. I make projects for entertainment and hopefully encourage others to have a go, I receive gratitude from many every day through emails, comments and other even more generous ways. Most people can see I'm genuine and honest. I don't have time for this back and forth, I tried talking and engaging with you but you're too set on putting me down so I'm letting you know this is my last comment on the matter. :)
I think it's awesome that you formed and shaped your own handle, making a section for the leather handle wrap. Good job!
chugs a tall can of Heineken then proceeds back to work
should have been fosters !
Oh, man! That is just BEAUTIFUL!
That came out great! Is that the tree where the wood came from in the end? Looks like a similar color. Nice belt sander trick :D And it was absolutely fine the talking intro, don't be shy!
Thanks! The tree that came from that stump was felled last year and is a Spotted Gum (it is a similar colour), I made a few slabs with my chainsaw - so thats got to season for a couple of years. The tree behind the stump is a beautiful Fig Tree that has grown over a large old tree stump. Thanks for the encouragement with speaking to the camera, it really is a strange experience!
Another unbelievable job. Thanks again!
Excellent work, thanks for 'saving' that classic plumb. I grew up in the Cascade mountains and we have more trees/forest than we know what to do with lol so I kinda know my way around an axe. My dad has a 55 gal drum full of just axes and mauls. I kinda want to go check if he has this one now! ...Im not sure how I feel about the leather wrap, ive never seen that done before, but hey personal preference. Thanks for the video.
Thank you - glad you enjoyed it! :)
Ever notice how incredibly steady his hands are? The man's like a surgeon.
Great video! I have hung heads upside-down before when I was first starting to do this... Surprisingly not hard to overlook! Overall, project looks great for a showpiece! Keep it up! Look up Weiderfan here on CZcams for some great axe hanging and sharpening techniques! He's very knowledgeable! 👍
Thank you! The funny thing is I didn't overlook it I actually put a lot of thought into it and still hung it the wrong way :)
I'll check out Weiderfan.
*I CANT BELIEVE I WATCHED THAT WHOLE PROCESS AND YOU DIDNT CHOP ANYTHING* !!!!!
Cause the head is hung upside down lmao
great video fun to watch
Glad you enjoyed it! :)
thanks if you like old mountain tales check out my channel
I'm actually impressed that you did the handle without using a grinder like others do. Nice to see wood craftsmanship.
When u LVL 99 smithing irl
What a beautiful ax! I love how you made that handle. One of the problems of buying a commercially made handle is that they pay no attention to the grain of the wood. I just bought a new handle for my camp ax that I have had for more than 40 years, at least the fourth one. That ax has taught many young'uns camp axemanship, so it keeps getting broken. I'd give twice the price for a handle with the right grain! Well done, Neil!
Just came across this channel recently and its really interesting! +1 sub
Thank you! :)
+1 Sub. Thanks!
Instructive video for me, the little images are well timed and kind of funny and the sound is well managed too, it was pleasant to watch.
Amazing life you living.
This is so nice to see in our throwaway world today , Very well done
What was the liquid he used to make the wood nore organic and orange?
Linseed oil
Beautiful job sir. Thanks for the video.
shame that head's on upsidedown...
Thanks! It is a shame but I suppose I enjoyed making it anyway - just looking for a positive :)
it's all experience ;)
Pask Makes nevertheless it looks wonderful and you did a great job! :)
I believe he's Australian... everything's upside down in that part of the world.
how can you see?
The jarrah wood is just gorgeous.
Glad you liked it! :)
Hey what happened to your arm 1:45
Just a scratch! :)
Pask Makes man that looks really read, looks like it "hurt" probably not to you but I would die
Some of the best hand made work on youtube
Thanks
if I would rate it on a scale 1 to 10 I would give you 15
Haha Thank you Theodore! :)
But the head is hung upside down
the sped up grinder sounds like a dentist drill.
...thanks for bringing back the terrifying memories.
3:45 RIP headphone users.
Sorry about that, audio is thing I'm struggling with the most - I'm learning though and I'll try better in future videos.
You work too hard :)
Absolutely beautiful. This is an S class restoration. Above A grade. Amazing job and keep up the great work.
Question for you. Why did you use linseed rather than tung oil? I'm a pipe smoker and doing research before I start working on my own pipes, and I'm still trying to figure out all the conflicting opinions and advice regarding linseed vs tung oil vs nose oil vs carnauba wax vs beeswax.
Use any kind of oil for an axe handle. I use canola oil but you can use motor oil or anything that's oil too
Linseed oil is usually revered for its purity and quality and it lacks contaminants that a lot of other lower grade oils have
I’d recommend bees wax
linseed is regarded as food safe, i don't know if it's smoke safe tho.
Linsead oils tends to stay in the cells of yhe wood for a longer period of time, helping not only bring out the grain but to also protect from water damage and help the eye of the handle swell and seat better to the head
I wish I had your skill and craftsmanship, who cares if it's on upside down or not, it chops wood and it's beautiful. God bless you.
Thanks mate! :)
i watch your videos often , i had every confidence you would make that axe right again . cheers mate.
Finally, someone who knows how to make a proper ax handle, instead of the toys I've seen some other people make.
Thank you!
i find it very therapeutic watching restoration videos. it goes to show, even the most damaged or rusty lump of metal can be turned into something beautiful 👌
Glad you enjoyed it! :)
That's a far sight better than a mere restoration, good sir.
You really brought that axe back to life. Nicely done.
Thank you!
Super nice! I've seen a lot of videos on this topic, yours has the most beautiful handle of the bunch! Nicely done!
That jarrah wood handle looks amazing!
That Jarrah is some fabulous wood! Wish we had that in the states, although we have some pretty nice stuff here as well. Nice work bringing the axe back from the scrap heap.
Wonderful work mate a pleasure to view
Beautiful restore that will last for generations.
Thank you! My 9 year old son has his eye on it already!
This editing is actually amazing. You are a creative force of nature.
That has to be pure gratification.
Don´t know a thing about axes but man that looks incredibly beautiful! It looks better than a brand new axe and the best part is that you made the whole handle thingy yourself. Art is what that is
Thank you Ryan! :)
Holy wow.....first time I've seen leather incorporated in a handle....your a fine craftsman. ...great job...
Fantastic workmanship ..... you've ended up with a beautiful & unique axe.
Thank you very much!
I don't care how that thing's on there. That's a fine handle. Beautifully done and by far the best part of that axe. Upside down or right way up, she'll chop wood all day.
Thank you very much! :)
Nice work on the haft, your obviously skilled when it comes to working with timber. Even upside down it will be a good underhand or splitting axe. The eye is always bigger at the wedge end, the wedge should be slghtly wider then the eye so it fills the gaps as the haft can be a bit short in the eye. Another way to look at it is the cutting edge has a beard and like on a man it should always hang down, towards the palm swell. An old axe that has been beatup on the poll can have the cheaks bend out causing the eye to reverse, this can be fixed on an anvil even if the handle is still fitted.
Thank you Michael! You have explained what may have happened and something I never thought of. I've explained in many comments here that I measured the eye with callipers before I hung it with the the larger opening at the wedge end, that has had me very confused. So it's possible for the cheeks to bend out and the eye reversed? With how this axe head as been abused then I would reckon that's definite possibility. Thanks again for the enlightenment! :)
That axe, and that handle, so gorgeous. Nice job.
Another quality video with a beautiful result! Cheers Pask.
An absolutely beautiful head and handle
That's a mighty fine looking axe now.
Fine job, very nice job.
Always a comfort to watch
Beautiful.
Turned out looking awesome!
Beautiful job mate and a great video bud
The editing in this was awesome! It was great getting to see the transformation in such a quick, yet understandable manner.
Thanks Brad! I'm glad you enjoyed it! :)
now this is real craftsmanship!!!
about how many hrs was put in?
That was a while back now but I reckon about 4-5 hours. :)
This was amazing to watch. You turned a $5 piece of junk into a $100 beauty! Outstanding!
Thank you very much! :)
Well done my friend!!! .....thanks for sharing !
been watching a lot of these for some strange reason, and it's nice to see one with short captions for people like me who have 0 knowledge of what's being done.
That jarrah stuff is beautiful! I would have put less curve in the handle to reduce runout but thats a great job. An oldtimer showed me to spot the inside of the head with a candle or oil lamp that way it leaves soot on the high spots when you're fitting.
Jarrah is very nice indeed! You should check out my reclaimed desktop video - the Jarrah in that was stunning. Thanks for the tip - I'll remember that. :)
absolutely gorgeous craftsmanship!
Thank you! :)
Loving your amping up the editing- lovely!
thank you for sharing your experience.Nice shape for the handle and beautiful colour of the wood , unusual in northern hemispher.
Thank you Romain! :)
Best restoration I've ever seen
Wow...that was art in motion.
You've done a bang-up job here, my friend
Thanks Nick! :)
I don't know anything about this kind of stuff but it sure is satisfying to watch
Beautiful work. It looks great and as long as it chops to your liking, that is what matters. Looks like it will chop down anything either way the head it put on. Love your wood selection and handle shape.
Thank you! Glad you liked it!
I love that leather you put on that handle that's genius