2019+ Corolla Hatchback: How-To Install OEM Toyota Spoiler
Vložit
- čas přidán 4. 09. 2020
- Install was pretty simple and straight forward.
IMPORTANT NOTE BEFORE YOY INSTALL! READ BELOW!
Since I did use the template, I come to find out, that the drivers sits more flush, and the passenger side has about 1/4 gap. This was due to me incorrectly applying the template. To avoid my mistake do the following below
Updated Fix! (What I did NOT do in the video)
- When using the template, each taping point is marked in numerical order.
- Apply masking tap in numerical order (ex, 1st tape, 2nd tape, 3rd tape etc)
-Align the template so that it doesn’t overlap the hatch line onto the actual body of the car. (Like In my video)
Once again I do apologize for this error and hopefully your spoiler will come out properly installed and centered!
Best,
Bo - Auta a dopravní prostředky
*IMPORTANT NOTE!
Since I did use the template, I come to find out, that the drivers sits more flush, and the passenger side has about 1/4 gap. So my suggestion would be to AFTER taping the template on. Place spoiler on top of the template and align the sides so they are flush, so you can then dial in exactly where you need the drill. The template may be slightly off.
I wish I read this part, I guess its off by a bit...I honestly don't wanna rip it off and center it, feels like imma do more damage doing that
@@NobleONE17 yea I removed the spoiler and had to remove the double sided tape, reapply new tape, and drill new holes. This time I just centered the center bolt with center of the car, now it sits little further back but has about .25 gap on each side but at least they now match. Spent about 2 hours total for everything. Key thing is to have the right tools and mindset for doing this
Spoiler looks GREAT. Diggin the white. Awesome color 👍
Thank you sir!!!🙏
The Corolla Hatchback is an amazing car dont sleep on it
looks badass Bo!!!
Thanks man!!! Hope you’re doing well! 🙌🏼
Great tutorial.
Looks great!
Thank you! 🙏
I wasnt able to find a 9mm drill bit only standards, I looked up the converted measurements and it says 3/8. Id love the help on what exact size i should use. I just got my SEIBON Carbon Fiber spoiler from Japan and im extremely looking forward to installing it as soon as possible
Another awesome video! Thank you for this. I have a 2019 SE Hatch but apparently the spoiler only fits 2021? I was under the impression 19-21 has the same body right?
Thank you! Yea if you have 2019+ Corolla hatchback it should fit, however I do always recommend confirming with dealer or seller before buying to be 100% sure and safe. To my knowledge Corolla hatches have been the same for the E210 platform to current
can u provide a link from where u baught it?
That drill dropping through had me jumping 😮
Hi, do you know what length the spoiler is or the top of your car rear so I know if this will go on my car which is not a corolla😅
Great video. I also used the template that I got from the Toyota dealership near me. Did one side come our more flush than the other? The left side of my spoiler looks perfect but the right side is not completely flush. It's probably less than a quarter inch so you can barely notice it. Just wondering.
Yea mine is exactly the same way lol. It bothers me a little but I got over it
Nice! Just got my XSE, had my workplace install it (Toyota), was just curious as to to the process as I wasn't at work when they did it! Neat.
👍🏼👍🏼 yea it’s pretty solid!!! Competes the look of the car for sure 😊
@@FujiboHeavy Yep! better than the 1" "spoiler" that was on my SE Sedan hahaha
How much was the install? unless you got a discount
@@mr.typical3169 Was $80 of labour but that was my rate, usually is whatever 1 hr of labour is for your dealer. I work on all my cars myself (see my channel lol) but I just didn't trust myself with lining it up right.
Highly recommend it, car doesn't look complete without it!
Looks nice
Thank you!
Hey Fujibo, I was wondering if double sided will work still? I just feel like I’m not ready to drill holes yet.
Did you
do you have a link to that ceramic spray you got there?
Daddy Cal yea man! Here is link: HydroSilex Recharge (16oz) - Universal Hydrophobic Coating Finish Spray-On Protection for Paint, Vinyl, Rubber, Plastic www.amazon.com/dp/B07DPB4JL9/ref=cm_sw_r_cp_api_i_kAcyFbMQMWB7H
Hey! Looks so nice obviously. I wanna install that spoiler on mine. Can you happen to let me know where did you get it? Did you buy at the dealer shop?
Aaron Kim yes! I ordered online from Toyota dealer in fredericksburg VA, I highly recommend ordering the spoiler template the same time as well! What color is your Corolla hatch?
Fujibo Heavy Mine is black with XSE trim. I have been it for two years. In toronto actually lol
Aaron Kim nice man! So yea you can order locally from your dealer! I’m not sure how much they would charge to install. But it may be better to have dealer do it, so if they mess up they fix it lol. And/or if they order the wrong part
Fujibo Heavy Yes, right definitely! Lol
what paint colour? im trying to find the one that matches my car but im having no luck 😅
Mine was the oem blizzard pearl, factory color matched
Gonna fit one of these on… was just going to use VHB tape. U think it will work? Not keen on drilling holes.
I have seen several people use only double sided tape (DST) as well. Do you have oem spoiler with bolts or a replica spoiler without bolts? The 2 main important things when only using dst, is 1) clean prep mounting areas where tape will stick 2) use a quality, durable dst that is intended for body moldings/exterior use
I bought a cheap $100 XSE style wing on eBay and was gonna use 3M VHB tape to mount to my GR Corolla
@@bbb4019 oh nice! Yea if thats the tape they supplied with, use that. If not, just use any 3m products designed for weather/body molding
There’s no nuts on the outer edges? Just the center near the brake light? Great video, I’m doing mine today!!
Scramble North very nice man! Nope no nuts ok outer edges since they would be very difficult to access from inside spoiler. Best of luck on the install!!!
Fujibo Heavy it came out perfect! Thanks for the video. You can see the car on insta @_ScrambleNorth_
will a dealership install it if i don't feel comfortable drilling?
Yup! They should be able to! It depends from dealer to dealer. I recommend just calling and see if they offer the service
10:52 what the 🤣 that deserves a sub
😂 it just randomly pops in my head. Something wrong with me lol 🤟🏼
Привет. Подскажи где купить спойлер на эту тачку?
Does the spoiler come with the bolts or do they have to be purchased separately?
Yup! So if you purchase factory painted spoiler from Toyota it comes with 3 center nuts/bolts mounted to the spoiler. So all you have to do is still the holes then tighten with supplied nuts
Is the section on the hatch that you have to drill through steel or plastic? My car is arriving March and I have opted in the spoiler as I love it. However I want to make sure the dealership prime and paint the holes after drilling so there is no rust if it is indeed steel in that section. =)
Congrats! The spoiler is soft plastic material :)
@@FujiboHeavy Thank you! I’m excited to get it. Oh, no sorry not the spoiler material. I meant the car itself. The top section of hatch/boot of the car where you drill into and make holes, is that steel or plastic? The actual part of the car you drill into. I hope that makes sense.
@@a.a.e so the part where I drilled the 5 holes were plastic. All standard hatchbacks have like an oem mini hatch spoiler which is a plastic material (similar to like bumper material) hope that makes sense! I never drilled into any steel/metal material during the spoiler install
@@FujiboHeavy oh fantastic. So then there are no concerns of the holes that were drilled rusting then! That’s great!
Any water leaks from the holes you drilled?
Not that I’ve noticed. Been good so far
You mind letting me know the sizes of the drill bits you used?
9mm drill bit
Would 3/8 work for this?
Hey where did you actually buy the spoiler it self
Just ordered from online Toyota dealership
Hey where did you order your windows visors from?!
Wellvisors.net :) the brand is also Well visor :)
They are also available on EBay and Amazon as well when they’re in stock
Hi where did you get the template?
I had to order it from the dealer as a separate part. Unfortunately, the oe spoiler does not come with it, which doesnt make sense 😅
Will this spoiler also fit on the corolla touring sports?
I’m not sure. Is the Touring also a hatchback? Would happen to have link to photo of the car?
@@FujiboHeavy The servicebook says hatchback/touring sports, so they cant be that different i guess? Visualy it looks the same, just longer. Here a link: www.toyota.de/automobile/corolla-touring-sports/build?path=customize/3c8992f3-e4f9-4ae1-bb67-305780342518/60480f5a-4ccd-47d5-ab63-3925bcf8bb9f&c=a7c5cf0a-e472-4919-9510-8c37aaa6a39a
@@senkoid ahhh I see! Yea the rear does looks exactly the same! It’s definitely worth a try! To me it looks like 80% chance it would fit, but not 100% sure
Anyone knows if adding the toyota spoiler affects performance? Or is it mainly cosmetic?
Heard it provides more downforce on the car, so it can help increase speed while being stable at the same time
Its a econo hatchback that makes 140 whp, no it wont add any performance increase lol
@@Torresmeza9 169hp. But you are late since I got myself a 22 GTI and have been driving it daily for 7 months (turning 8 months by the end of March). Trying to get myself a Golf R for AWD fun in the snow (I live in Canada and with winter tires AWD has the best traction).
Where can you buy the template?
Any local Toyota dealer can order this for you, or you can order from any dealer online, and they will ship to you!
Where did you order the piece from ?
The spoiler and template were both ordered from Toyota dealership :)
@@FujiboHeavy here in malta said they dont order them :(
Hey man, I’ve tried for months to order one but I keep getting told that Toyota won’t sell it and they are on hold with no eta. What should I do? Order a eBay one?
Really? I ordered mine from parts.lakelandtoyota.com/ , but not sure what the inventory is currently. It really depends if you want oem or just get replica and have it painted and applied with just double sided tape
@@FujiboHeavy I’ll call them tomorrow and see if they could sell me one but if not do you think it’s safe to order a eBay one and just stick it on or what is my best option?
@@yeti986 I dont have much experience with ebay replica spoilers unfortunately so I cant really recommend it personally. However if you do decide on ebay spoiler check seller's feedback rep and when installing, make sure to use good 3m double sided tape, and clean spoiler/mounting surfaces before sticking onto the car
@@FujiboHeavy alright man, thank you! I might try that or I might try to buy one that’s not oem but is from a known brand so I know it will be reliable.
@@yeti986did you end up getting the rep spoiler on eBay? If you did how was the installation process Im thinking about getting one
What is the small arrow supposed to line up to?
Which arrow are you referring to?
@@FujiboHeavy the small one, I assume the big ones goes to the top corners. I'm thinking the smaller ones have to line up with the black trim under the stock small spoiler
@@truzami yea the templates tell you where to line everything up, I just don’t remember off hand what the template looked like :(
@@FujiboHeavy I can send you a picture, I just want to be sure
can i get a link to this spoiler in orange? i can’t seem to find it
You may have to contact local Toyota dealer. They should be able to run your vin and verify the paint code then , they should be able to order you the correct color matched spoiler:)
@@FujiboHeavy thank you so much i appreciate it :)
@@gslumpt562 no problem! What year is your Corolla?
@@FujiboHeavy mines 2020!
Did the spoiler came painted?
yup. Comes color matched from the dealer :)
It's too up idk it brakes you, course more drag more consumption
I still get 30+ mpg . You can always design your own spoiler, make it the way you like🤟🏼
@@FujiboHeavy where you ca. Design?
@@Shaylesety probably start with a design first, then come up with a mold, then go from there. You need to contact a company or someone that specializes in creating custom fiberglass/polyurethane parts. Depends how much money you want to invest in it as well
Is there a link?
I can look for you! What color spoiler are you looking for?
@@FujiboHeavy actually it’s all good! I found one. Thank you anyway! 👌
@@BateMasterJeff9887 sweeeet!
Mate I got my rear spoiler from online it's not factory made but I didn't get any screw.where can I get screw
You may have to go to local hardware store and see what bolt will fit best. Does it have drilled holes to screw in the bolts?
@@FujiboHeavy yeah buy I just call him.he told me double sided tape will hold the spoiler.will double sided tape enough to hold the spoiler?
@@weejaay2632 got it. Yea just make sure to use high quality 3m tape and make sure the paint surface is completely clean with no grease/wax/oils. And it should hold well, but if you want to add in bolts it’s completely up to you
@@FujiboHeavy which tape do prefer?mate
@@weejaay2632 anything that is designed by 3m for exterior molding panels/ parts. Let me see if I can find Amazon link: amzn.to/317q5Xl
LOL #blinkrepresent
HAHA, WERD!
How much would the dealership to
Install
It
Dj Mesa that is a good question. I would hope, no more than $200 or so. But the best accurate way would be to contact your local dealer. What is city your closest Toyota dealership?
Fujibo Heavy mine is Orlando Florida
Dj Mesa just got off the phone with Toyota of Orlando, and their service dept does not do the spoiler install. However they did give me the direct number to the body shop dept which is: 4072986006. They open 7am mon-fri. So if you wanna give them a call and see how much they’d charge, or I can. Whoever gets to it first lol
Dj Mesa you have the spoiler already?
Fujibo Heavy yes
You put that template on so sloppy
колхоз!
Sorry dont like the way you instaleted
How would you have done it?
Boooooo