my question is what kind of rear end is this? poss a tractor set up with a pto? i have never seen one with a 90 degree pinion shaft hanging off the side of it like this one shown as far as all the rest of it is pretty easy stuff modifying it with gears and shorting the housing and axles
Muy bien trabajo pero se le olvidó ponerle el flanche que hace de retén para que no se salgan las punta de eje en el vídeo no vi que se los allá puesto
For everyone asking about the axles staying in place, my guess is at about 13:30 in the video there is some tabs welded to the frame with set bolts that hold them in place on each side.
Overall, this is a highly informative and enjoyable video for anyone interested in fabrication. It showcases your talent and expertise while providing valuable insights and inspiration 👍👍👍
I have wondered the same thing about every one of these videos I think this rear end is out of a small truck with a mechanical 2 speed on it probably would be easier and more cost effective to just buy it already built but then that's not the point of watching the videos I am trying to get a good idea for a chassis to put a small waste oil engine on spending as little money as possible I was going to use an old gator we have at the shop but I was able to revive the existing engine and my boss thinks it is a waste of time even though I am going to do it on my own time so I am just going to build my own chassis and put it all together for myself and then when it either works well or doesn't then it will be all on me but I am very good at problem solving so as soon as I can get the basic plan together and gather up my part's I will be building it and then I can do whatever I want with it and nobody else can put any claims on it
The whole time I was watching the video of them making this modified we're axle I've been asking myself how are they going to stop stop what they call axle walk where the axle literally walks itself out the axle tubing that's the reason why the original axles had a affordable retainment On each side the thing I don't understand is this Opportunity and option of using a lathe why didn't they Cut the shaft axle shaft down and use the lays to reuse the hubs Relocate 4 new holes that are already on the hubs that are pressed in Wasn't until I watched the video all the way to the end if you look very carefully in the video you see this little Adapter/bolt put pushing up against the center of the axle shaft from the outside on the frame Something I didn't also see which they should have also looked into is the torque distortion what a rear axle does in putting it A torque arm that goes from the axle somewhere on the axle tubing forward so it don't cause Axel rap even under it load Doesn't matter if it's on a trike or If it's directly bolted to a set of tires you will get axle wrap also
Gas golf cart axle? Makes sense to me to just find one with a bad engine and upgrade the engine to higher horse power. No need to cut and shorten axle shafts. They are heavily built.
Okay so my question is, what is that rear end off of originally, what vehicle? Because I do not recognize that type of third member on any vehicle I've ever worked on. Thank you
Awesome video but I have one question what is gonna prevent the axles from walking themselves out I seen no c-clips and I didn't see any c-clip eliminators
U are correct 100 % they are going to fall out there is nothing holding them in !!! If he has a drive tire moving the 3 wheeler or what ever u call what he has built it is 1 turn the wrong way from Fallin out probably why there is not a full video of it now lol !!
13:30 in the video shows a bolt threaded through a bracket which presses on the center of the axle. A fairly hideous solution. Can't see it working well long term.
9in ford axle shaft are retain by 4 bolt outside where the outer most axle bearing is what first part he removes when removing the axle. What I would done cit axle to lenght plus 1.5 ins press off bearing and retainer. Then took the wheel Flange then welded it the axle press it back on problem solved 😉 👍 that is strong in possible be
За работу класс !!!А как выглядит ето машина со стороны?Сколько у неё калёса и какие?Для чего создано машина?Землю пахать?Дрова возить?Почему масло не залевали? Что за мотор?
Everything looks like leftover stuff from the Soviet Union. Scrap yards are full of it. You can do the same with old car and trucks made in every country. The construction is basically the same only with different parts that are slightly different. You just use what is available.
This misses the point. it already has a 90 degree drive. Cutting a diff down and making hubs for the sprockets is nice, but not the hard part. What is hard is locating a 90 degree reversable drive for the diff in the first place.
@@leevahal900 reverse was cobbled in later and not original...look at the whole for the handle when he is pulling it apart...obviously a gas axe was used
@@leevahal900 the belt drum was driven and the differential piñon originally could be locked out They cut and blocked off the input shaft and put a locking screw to keep the differential driven by way of feeding power through the belt drum output shaft Then use the drums’ lockout for neutral and the takeoff and reverser to drive the differential Fine as long as the torque is low enough to not blowout the PTO
hay quá Phúc ơi, nổi cả da gà luôn nè, thấm vào từng mạch máu
Парни Молодцы и руки растут оттуда откуда надо🤝👍💪
Только голова подводит
you gentlemen are a very talented group. Well done.
That 90 degree adapter is a reversing unit. I believe this axle came out of a cart for transporting passengers kind of liker a golf cart.
Ótimo trabalho! Parabéns ❤
my question is what kind of rear end is this? poss a tractor set up with a pto? i have never seen one with a 90 degree pinion shaft hanging off the side of it like this one shown as far as all the rest of it is pretty easy stuff modifying it with gears and shorting the housing and axles
Cool job! you are a machine!
Fabulous job !!!! CONGRATULATIONS !!! 🙏🙏🙏🙏🙏🙏🙏🙏🙏
Que maravilla como se ve todo desde del cielo
Esmuy bueno el estilo de trabajo
Thank you for nice sharing
What stops the half shafts coming out of the axle?
Upeata työskentelyä, koska kaikki sujuu niin määrätietoisesti 👍🏽
ලන්කාවෙ ගැම්මක්♥️
Cảm ơn bạn đã chia sẻ rất tuyệt vời luôn
..
Muy bien trabajo pero se le olvidó ponerle el flanche que hace de retén para que no se salgan las punta de eje en el vídeo no vi que se los allá puesto
Bom trabalho amigo parabéns
Excellent job!
Just wondering what holds the axles in
มีความคิดสร้างสรรค์
Muita geringonsa para uma funsao, resumindo so gasto desnesesario
YES I DO BELIEVE THAT THE DIFF IS OUT OR OFF OF A TRACTOR
AS WELL THIS VIDEO IS MOST LIKELY FROM
INDIA AND THEY HAVE
ALL SORTS OF FARM EQUIP
That’s impressive 🤙
*OK bạn, chúc bạn luôn thành công nhé*
Love from Pakistan 🇵🇰 💖 💖 💖 💖
Very nice 👍 thanks for sharing your video
Good good super duper work
Nc designs, Good Job.
Is that a ford 8" diff you started with?
Well done great job that wouldn't be a dog clutch from a boat would it? All the best to you and your loved ones
Exactamente trabajo amigo lo que,no me explicó es como fijaste las flechas al diferencial
For everyone asking about the axles staying in place, my guess is at about 13:30 in the video there is some tabs welded to the frame with set bolts that hold them in place on each side.
I agree, sketchy as h----.
Nope: 13:42 see adjustable retainer bolts but I can not see how that would last long. Maybe this was just first run and has other plans to fix
سبحان الله وبحمده سبحان الله العظيم.يا ايها الذين آمنو لا تلهكم اموالكم ولا اولادكم عن ذكر الله ومن يفعل ذالك فاولئك هم الخاسرون
....
@@chrisallen9154 سبحان الله وبحمده سبحان الله العظيم.يا ايها الذين آمنو لا تلهكم اموالكم ولا اولادكم عن ذكر الله ومن يفعل ذالك فاولئك هم الخاسرون
@@jamescole6846 سبحان الله وبحمده سبحان الله العظيم.يا ايها الذين آمنو لا تلهكم اموالكم ولا اولادكم عن ذكر الله ومن يفعل ذالك فاولئك هم الخاسرون
❤🎉 allsome work buddy from cruzermans inventions 😁👍🦇🎉🌟
Good job
Nice skill
Everyone needs to know what the axle originally came from especially the 3rd member with the reverse gear what is that from
Sangat kreatif
Thank you very much for your positive reaction; We are waiting but above all don't stop your videos.... A+
Thank you !! waiting
No grease anywhere, and no differential fluid?
Rất tuyệt vời
Hello! Minute 4:06. Tell me please where this part was originally used? It was a part of a bike or car? Nice 90degree reductor box
Wonder whether it would fit in a smart car and put in motorbike engines.
Suara mesin berat..Beban Putaran berat..!
Amazing
What kind of rearend did u start with
Overall, this is a highly informative and enjoyable video for anyone interested in fabrication. It showcases your talent and expertise while providing valuable insights and inspiration 👍👍👍
Mantap 👍👍👍
Класс где токой мост стоит с реверсом
Ethu ethoda grown and great box.
I have wondered the same thing about every one of these videos I think this rear end is out of a small truck with a mechanical 2 speed on it probably would be easier and more cost effective to just buy it already built but then that's not the point of watching the videos I am trying to get a good idea for a chassis to put a small waste oil engine on spending as little money as possible I was going to use an old gator we have at the shop but I was able to revive the existing engine and my boss thinks it is a waste of time even though I am going to do it on my own time so I am just going to build my own chassis and put it all together for myself and then when it either works well or doesn't then it will be all on me but I am very good at problem solving so as soon as I can get the basic plan together and gather up my part's I will be building it and then I can do whatever I want with it and nobody else can put any claims on it
Thank God there will be electronic torque vectoring to replace the differential in the era of EVs 😅‼️
Well done
sangat kreatif keren
super gut
What was that crazy Trans Axle Diff thing out of ?????
It looks vaguely like what was under some of the "Tuktuk" three wheelers.
Bom 👍
🤩
От какого автомобиля этот мост ?
سبحان الله وبحمده سبحان الله العظيم.يا ايها الذين آمنو لا تلهكم اموالكم ولا اولادكم عن ذكر الله ومن يفعل ذالك فاولئك هم الخاسرون
..
Great minds think alike....... Please tell us what that axle is from. I have 4x4 cart ideas that I can use that axle for.
My guess is it originally came from something like a "Tuktuk".
BAHAhahahahaha
@@Reman1975 , thank you for your best guess. I have been doing some searching through images and what I have seen comes close to what's being used.
Where is this work done
K
バイクエンジン流用の４輪車両を作成する為の最難関がバックギヤと左右差動制御のデフギヤに動力の伝達をどうするかなんだけど、チェーンを生かすなどシンプルですが
これは凄く上手く出来てますよね～ 市販してくれたら売れると思うけどな～ （勿論ですけどレース限定とか公道走行には認可は地獄だから考えたくないけどね）(o^―^o)
Creative
The whole time I was watching the video of them making this modified we're axle I've been asking myself how are they going to stop stop what they call axle walk where the axle literally walks itself out the axle tubing that's the reason why the original axles had a affordable retainment On each side the thing I don't understand is this Opportunity and option of using a lathe why didn't they Cut the shaft axle shaft down and use the lays to reuse the hubs Relocate 4 new holes that are already on the hubs that are pressed in Wasn't until I watched the video all the way to the end if you look very carefully in the video you see this little Adapter/bolt put pushing up against the center of the axle shaft from the outside on the frame Something I didn't also see which they should have also looked into is the torque distortion what a rear axle does in putting it A torque arm that goes from the axle somewhere on the axle tubing forward so it don't cause Axel rap even under it load Doesn't matter if it's on a trike or If it's directly bolted to a set of tires you will get axle wrap also
Ưueeuru
سبحان الله وبحمده سبحان الله العظيم.يا ايها الذين آمنو لا تلهكم اموالكم ولا اولادكم عن ذكر الله ومن يفعل ذالك فاولئك هم الخاسرون
...
What kind of rear end is that?
Good 👍🇦🇿
Gas golf cart axle? Makes sense to me to just find one with a bad engine and upgrade the engine to higher horse power. No need to cut and shorten axle shafts. They are heavily built.
Okay so my question is, what is that rear end off of originally, what vehicle? Because I do not recognize that type of third member on any vehicle I've ever worked on. Thank you
Looks like a gas golf cart axle.
It must be a super wide golf cart@@22kpar1xcyberdyne9
👍🔔ok bos, 👏👏👏
Forgive me, but, all that work for an open diff? Am I missing something? Very pretty, but climbing a rock pile, I am not so sure.
😎👍 Brasil RJ
What vehicle was that differential sourced from? Iv never seen a 90 degree input.
Looks like he used a bevel gear setup
Small tractor with an accessory belt-drive-drum
There's a drum sticking out in front of usually the right side tire.
See Farmall or Massey/Ferguson
@@ja60123 thats what I was wondering since the original reversing lever was not factory judging by the hole blown through the case
The gearbox with reverse is produced by us.
Что за мост с таким редуктором.
Berapa harga jadi gearbok sama as komplit... saya mau beli..
ලංකාවේ නෙ ඔයාලා💪
මාත් අසයි වාහයක් හදා ගන්න🌟
which vehicle differential is this
I have a Harley motor that I want to put in a VW beach buggy and this is how I'm going to do it
who has an articulated or transverse diff tho?
Palpak na
What is that crazy sideways diff from? Its awesome!
The diff is normal, but the angle drive with reversing gearbox on the pinion shaft is bizarre... it would be nice to know what it's from.
The side shaft thing is actually the transmission
@@jamesalexander949 do you have any idea what it's from?
@@connorbabcock8197 no. Maybe an old cushman from the 50s would be a guess
azert en is kivancsi lennek milyen differencial ez ? neve .................
Reverse box konsa he
Where can we buy and how much
where lock the tire no out
Awesome video but I have one question what is gonna prevent the axles from walking themselves out I seen no c-clips and I didn't see any c-clip eliminators
U are correct 100 % they are going to fall out there is nothing holding them in !!! If he has a drive tire moving the 3 wheeler or what ever u call what he has built it is 1 turn the wrong way from Fallin out probably why there is not a full video of it now lol !!
13:30 in the video shows a bolt threaded through a bracket which presses on the center of the axle. A fairly hideous solution. Can't see it working well long term.
9in ford axle shaft are retain by 4 bolt outside where the outer most axle bearing is what first part he removes when removing the axle.
What I would done cit axle to lenght plus 1.5 ins press off bearing and retainer. Then took the wheel Flange then welded it the axle press it back on problem solved 😉 👍 that is strong in possible be
@@mr.e.. I agree. Quite Primitive, and (almost) an afterthought.
Do you make and sell? how much price this part.
Ya koncy gady ka rivers geairbox ha Sir
За работу класс !!!А как выглядит ето машина со стороны?Сколько у неё калёса и какие?Для чего создано машина?Землю пахать?Дрова возить?Почему масло не залевали? Что за мотор?
How are the axle shafts held in place, there isn't a bearing retainer on your shafts, but apart from that this is well done.
Watch the end of the video. He has a bolt mounted on the frame that keeps the axles from coming out of the carrier.
A bolt is okay for slow speeds and not used often, but it needs a ball of sorts that can rotate so as not to self-destruct
How much for u to make one and sell
Parts list please
Я думал в Индии живут необразованные дикие люди а здесь все грамотно заделано
Ага так же как и европа загнивает. больше тв смотри)
Здравствуйте ат какого автомобиля Мост..
Looks like a Toyota rear end.
If it's going to be offroad, why does it need a diff? I mean, isn't that why 4x4's have locking axles?
i have an idea outboard boat
А что с маслом,мост без смазки работает???
80-90 w
Everything looks like leftover stuff from the Soviet Union. Scrap yards are full of it. You can do the same with old car and trucks made in every country. The construction is basically the same only with different parts that are slightly different. You just use what is available.
the key is the 90 degree input gearbox and I have not seen one of those outside of a 70 year old ford tractor so its not common here in the USA
This misses the point. it already has a 90 degree drive. Cutting a diff down and making hubs for the sprockets is nice, but not the hard part. What is hard is locating a 90 degree reversable drive for the diff in the first place.
Old tractors that had an accessory belt drive drum have them, think Farmall or Massey/Fergason
Yea and with a reverse.
@@leevahal900 reverse was cobbled in later and not original...look at the whole for the handle when he is pulling it apart...obviously a gas axe was used
@@leevahal900 the belt drum was driven and the differential piñon originally could be locked out
They cut and blocked off the input shaft and put a locking screw to keep the differential driven by way of feeding power through the belt drum output shaft
Then use the drums’ lockout for neutral and the takeoff and reverser to drive the differential
Fine as long as the torque is low enough to not blowout the PTO
www.vinsonfarm.net/photos/belt_work2_Portland08.jpg
Ok