Axial SCX10iii - Everything you need!
Vložit
- čas přidán 25. 07. 2024
- Covering all the electronics choices you need, radio programming and in-depth review of what this truck is like out of the box. Plus a custom lighting kit, and a number of 3D printed parts to add.
Axial SCX10-III: bit.ly/36MLFiu
Radio Programming: 26:40
Motors:
Brushed - Holmes Crawlmaster Sealed Can 16t (35t equivalent): bit.ly/36MLGmy
Brushless Option 1 - Holmes Puller Pro 540 2700KV: HH - bit.ly/3cayMAj Amain - bit.ly/3eEkSaD
Brushless Option 2 - Holmes Puller Pro 540 Stubby 2700KV: HH - bit.ly/3b4hTHr Amain - bit.ly/3eEkSaD
ESC
Brushed Option 1 - Hobbywing 1080: bit.ly/3gB5ttz
Brushed Option 2 - Tekin BXR: bit.ly/3dho248
Brushless Option 1 - Tekin RX4: bit.ly/2zL4LcJ
Brushless Option 2 - Castle Mamba X: bit.ly/2yRwnMU
Steering Servos
Option 1 - Futaba S9177SV: bit.ly/2Xg4M1i
Micro Servo (Dig)
Option 1 - Spektrum SX107: bit.ly/3cjApvh
Servo Extension (GET THESE FOR YOUR MICRO SERVOS):
Optional Servo Horn Parts for other servos: bit.ly/2BfUYM5
BEC & Accessories
External BEC: bit.ly/3euSOGE
BEC Bypass Adapter: bit.ly/3eBvMhC
Radio Gear
Futaba 4PM: bit.ly/2TY8B9o
Futaba R2106GF RX: bit.ly/2MfZlcg
Soots Scale Painting: bit.ly/2XxX0QH
My Trick RC Lighting:
MTRC - bit.ly/34uZ1yR
Amain - bit.ly/3gByTb3
To see a full list of what on these trucks or what is available for sale currently, go check out www.HarleyDesigns.com
#axialscx10iii #harleydesigns
Follow My Social Media!
HarleyDesignsInc
Facebook.com/HarleyDesignsInc
My Camera/Production Gear:
Sony A6400 Camera: amzn.to/2K0ixt1
Sigma 16mm F1.4 Lens: amzn.to/2Y9TQj2
Audio-Technica AT875R Microphone: amzn.to/2YcVqR7
GoPro Vlogging Rig: • GoPro Hero 7 Vlogging ...
Zhiyun Crane V2: amzn.to/2Eo3Zjc
MacBook Pro 15in 512gb: amzn.to/2DGgBRQ
Samsung T5 500gb Hard Drive: amzn.to/2CxRcN4
DJI Mavic Drone: amzn.to/2EGw2un - Auta a dopravní prostředky
The fact that you give away so many of these 3D printable files that you make, is one of the reasons this is my favorite channel to watch and support. You dont have to sell every little tiny 3d file that you make like some other CZcamsrs. You can tell its not about the $$.
Hey, I was just wondering where you find the 3D print file.
Much respect for your manner in presenting these videos. A wealth of credible information, and some great honest advice. Nice to hear your thoughts on priority of choices, compared to what a lot of others choose just because everyone else does !! Thank you
Glad you solved and explained the clicking issue that has confused everyone. Mine is still in the box on the workbench. Thanks Josh.
Very nice video with your SCX10 III, I really like the rims and tires ! Wonderful vehicle!
Absolutely incredible build Josh 👍🏻💯
I might get one once they offer the straight axle version. That paint job came out really nice.
Good stuff! Thanks for the radio tutorial!
Great video 👍 I have that same radio and it's the best. The radio has all the great functions as a real expensive radio but with 4 channels and no color screen.
thanks for the programming tips. much appreciated.
23%OD, PullerPro Stubby 2700, I’m liking this! Freewheeled dig disengagement does suck
I love that shirt! Is that the new Harley Designs Tiger King shirt? Very nice build Josh. I do see you locking out that 2 speed and upgrading parts on that dig unit. 👍🏼👍🏼
Suuts killed that paint job! I like it ! it needs some white vanquish rims 😎
Been buying wood for house projects. Expanding my hobby room!! Woot!!!!
Nice build and updates 💪🏾💯🚀🔥
The axe system is awesome! I also have tried mamba x, sw4, and copperhead, for brushless I would definitely go with axe system and for brushed I would go with 1080
Radical paint job!
GREAT BUILD MAN !
PLEASE DON'T "FEEL OUT" THIS TRUCK JOSH
Scale Builder's Guild, don’t worry, knowing Josh, it’ll all be consensual.
He’s been feeling the underside the whole video
Sortafast Industries , when you think about it, we’ve all watched him feel many undersides through the years...
we're all enablers just watching him touch all those undersides😂
I'm always surprised to hear that you don't like the AXE system. I've used pretty much everything on the market including the Mamba X and the Tekin RX4 and I find the feel of the AXE to be far and away better than anything I've ever used. It was such a game changer when I got one that I don't think I'll ever go back to one of the other systems on a crawler.
I’d rather buy from an American company. Specially when the chinese stuff your buying cost the same
@@SuperSilence23it all comes from China.
Love the Axe system. I have friends that lost their nice crawlers to the Mamba X fire starter ESCs. No thanks Castle. Hobbywing is much more reliable.
Good luck on finding Spektrum SX107 Micro Servos right now. Everywhere online is out of stock until late April early May. My local hobby shop guy couldn't even find any.
My trx4 blazer has a 4600kv castle an mamba x running 4s 9t pinion it can bash plus throw it into low an it’ll crawl great !
Nasty truck bro🤙🏽🤙🏽🤙🏽
Very nice presentation :)
To me, the "weakest link" of this truck is the attachment point of the panhard link to the provided brittle plastic bracket on the chassis. Broke mine on its first outing in the rocks. Fortunately, Axial provides a second bracket in the kit that can be shimmed to replace the broken unit while I await receiving the proper part.
Maxxis TRAIL GRAPLER😂 nice rig really sharp thx for sharing
So Josh, let's see you set up a RedCat Gen 8, TRX4 and this SCX10 iii to the best performance level you can achieve with each and then go out and do a comparison drive of all three.
Gen 8 doesn't belong in the same sentence with anything Axial or even Traxxas for that matter. all I'm gonna say is the Gen 8s a steering geometry joke, a nightmare w/ Horrifically weak portal axles & design..
Love the t-shirt🐈
I can’t wait till the SCX10 iii 6X6 comes out, there gonna make one and I have the money ready to buy when they do. Can’t wait, it’s gonna happen
Glad to hear you have good things to say about this baby, haven’t built mine yet still. Josh your kinda picky bro so you saying you like it is great
I thought you were going to have"Nicole" painted on the doors and force her into crawling...Ha!
Turned out nice. Thanks for the informative content
I like that she comes to the events but am glad she has no interest in the trucks themselves.
I agreed with everything on electronics up until you said stay away from the axe system. The 3 that I have are awesome and ordering a couple more of them.
That FOC is awful and they are low on power compared to others in its class. It takes all the feel out of the system. I cant stand those systems.
Have you ever tried a sensorless outrunner setup? Such as a SW4 and revolver?
this is the second one i have seen in this color. I have a 2015 jeep wrangler jku in copper brown pearl coat. I am the only one that has one that color where I live. i have owned for 4 years now and havent seen one in the same color as mine. I didnt know ppl liked the color that much. I do know that the color was special for that year and only 5,000 was painted in copper brown pearl coat.
That’s lookin rearly rearly nice truck think it would look better with some simerler colour wheels I have heard u mite won’t to trim the inner fenders a little to make getin the Brady on n off easer m8 👍👍👍
Love your videos and thinking about getting back into the hobby with the scx10iii. Was wondering what charger you would recomend?
Venom pro duo
Hey Harley I'm upgrading my bomber with Vanquish and Axial parts, got a v2 axle housing Axial ring and pinion, crazy Eddy bearings and Vanquish spool but new spool won't fit so I have to use the stock Axial locker I don't understand why the new Vanquish spool won't work in a Vanquish axle please help.FRUSTRATED!(it's too tight)
do you know if you can use a engine sound box on this jeep? i had the scx 2 and took my sound box out of that and tried to put it in my new scx10 3 jeep and it doesnt seem to have a spot on the reciever for it to work, this sure does take away 50% of the fun, dont understand why this company wouldnt havr thought about this, its crazy.
Before watching the video. Any bets on how many times Josh will put his hand under the truck? Like hes FEELING IT OUT.... Im going with 15..
I already knew what you were gonna say about this truck before even watching the video. Not everybody has the money to put futaba servos in thier rigs and there’s plenty of affordable options out there. I feel you never gave the axe system a real shot and just condemned them before guys started using them and got some feedback to tweak the kinks out. A lot of guys are complaining that the 1st and 2nd gear doesn’t have much of a noticeable difference to justify using it as a true 2nd speed.
There are plenty of other servos but if I can’t say I know they fit well from personal experience then I’m not going to tell someone to buy it.
I’ve given the Axe a bunch of tries, multiple cars and every firmware available. It’s just got too many cons compared to any of the positives it has. There are far better systems available.
I had the same sentiment on the 2 Speed in this car and my dislike for 2-speeds in general.
What do you think about the axial scx 10 lll jeep RTR.
I just got the roller version of this
Yeah he does awesome paintwork, he has done to bodies for me, I'm going to have him do me a pro body,
I couldn't stop staring at the princess kitty shirt....
You didn't put the detail stickers on the tail lights. And thanks for the Futaba tuturial , I use a 4pv.
The person he hired to paint the body probably chose not to install them.
I bought a rtr and first run the dig servo stopped working 😢 please if yall know how to keep this from. Happening please help
I’ve read that people are burning out the sx107 micro servos. Could it be because they’re rated for only 6.0 volts maximum?
This truck also has three dig position not two,watch other video and you will learn three different dig features which is awsome.everything covered in this video we knew before the truck come out so thats why the video i shared is more at the level we need.
I go over the three dig positions in programming and am very familiar with how it works, but the main benefits people need to know are how to use it when locked. Using freewheel dig effectively is something that comes with lots of practice.
How hard is it to program the rx4 esc
Hi Josh, I really like your vidzzz! I just bought the SCX10III and a hobbywing axe 550 2700. It does not seem to fit. Do you have any suggestions? Thanks, Pim from the Netherlands.
The AXE system is not a system I personally like to run, I run the Holmes Hobbies Puller Pro V2 in my SCX10-3.
Turned out awesome Josh, as always you do great work. Love those halo lights, I bet my pro would look awesome. I've been loving my VS4-10 Pro !! I love this rig, but I noticed the steering knuckles getting a little sloppy, in the back axles pull in and out 4 to 5 mm's don't know if that's normal. But on the steering knuckles, guess I should order some of those threaded sleeves
Good video! Who makes underdrive hypoid gears?
Seems like nobody... Unfortunately only Overdrive.
I have one of these I absolutely love it 100% about if anybody decides to buy one please buy an aluminum panhard bar mount in aluminum because I can promise you the plastic one will break he's not joking that part is the weakest link they always break but once you get the aluminum one you should never have any issues it's a great truck
My original RTR DIG micro servo died immediately. Replaced it with a new SX108 and it lasted 3 minutes.
Have you tried using 3s 18650 3500mah batteries? I dont think you need a large amp draw so they should work. 3500mah is the largest I found but are lighter than lipo and smaller in space.
Large amp draw is required for these setups, it’s a big factor in battery quality.
TEKIN are so expensive..
2013 scx10 still running great 🙂👌
How much for Soot to paint that body?
what model futaba transmitter sir?
And what about the revolver motor?
You’d mentioned the 1.7:1 gear reduction would give you a slower speed. Would you also see an even smoother low slow control? Dumb question probably. Would there be a way to use the 10.2 Rock Jocks as the straight axles for the 10.3
No, it needs an offset axle.
Harley Designs ah yes, and there in lies the dumb question:) Thanks again man.
I have the AXE system in two trucks any they work fine compared to my other Holmes/Castle combos. What is it that you don't like?
Alvin Marin I have the same question too. I run an AXE system in my Capra and I love it, I see no issues with performance. I’ve no doubt there’s better out there, but I don’t see why this one is frowned upon. I really like the built in Bluetooth, changing settings on my phone, in real time, while I’m driving is an awesome feature.
love my axee also
The main function of the AXE system that sets it apart from others is that it modulates the power automatically to give a controlled smooth drive. (it give more or less power to keep it smooth even if you didn't change the trigger at all) This is what Josh doesn't like. I don't either. It's not that it's a bad system it just does something we don't want it to do. Would rather decide when more or less power is needed ourselves.
It’s also low on power compared to other 540 systems and has poor start up and punch. Way too many things on the cons list for me to ever suggest it to anyone.
Harley Designs, I’ve found that start up has been incredibly smooth in my Capra and you can adjust the punch to your heart’s content via Bluetooth , I’m also using a Spektrum radio and receiver and running 3s LIPO. I’ll admit that if I’m going to build something for comp, this wouldn’t be the system of choice, but I think for the average day to day hobbyist, I would have no issue recommending this system based on value for performance. Thank you for sharing Josh, I appreciate your take on the R.C. world.
I personally use tekin rock 35 crawler motors.
Hey Josh want to order some vanquish wheels what size hub should I order?
Ken Rider Some people don’t like Vanquish wheels because they use SAE hardware, but at least they give extra hardware because some of those stainless steel screws have bad threads.
How did you get the servos to shift properly? Or did they in real life once you started driving the car as well? I can't get mine to shift properly, high and low doesn't seem to make any difference which I choose and the dig I'm worried to use since I don't know if it will engage properly afterwards, I've had the car rolling down hills after trying to use the dig just because the rear wheels didn't engage and the front ones had bad grip
The stock servos and servo savers are fairly weak. Upgrading servos helps quite a bit.
@@HarleyDesignsInc that I've noticed, have you any servos you can recommend? I assume just getting digital servos seem like that should help a lot
Where the best place to order a scale trucks
Awesome build! Quick question for you, why do you not like the hobbywing axe combo? Just curious as I just installed the 2300kv system in my Capra.
Low power, poor start up, no trigger feel because of the FOC.
Harley Designs thank you for responding back!
@@HarleyDesignsInc you can turn the FOC off Josh if you don't care for it, you keep saying underpowered, in what perspective? I usually run mamba X & Holmes Puller Pro or HW 1080 with cheapy Holmes motors but I recently drove an Axe 2800kv V2 it felt great w/ loads of punch ton of power. The best part of the entire drive was that it's SILENT 😶 I hate the Mamba X whine lol
@@off-roadrc7126 the low end start up power is not nearly as punchy as a Tekin or Holmes. That’s just something that can be measured, it’s not just conjecture. The Hobbywing is very smooth, no doubt there and the quiet drive is quite nice if the sound bothers you. I’m so immune to the sound of normal brushless now though. Out runners are the one that still gets me though.
@@HarleyDesignsInc I see what your saying, I didn't realize the low end start up power was lacking like that, Im guessing that can drain a battery much quicker? Good to know.... like I said tho, I generally run Mamba X with one of John's Puller Pro motors & it's not a deal breaker that the castle esc whines it' was just cool to test the Axe V2 & hear nothing but gears turning for a change. Thanks for the information..... 👍🏻
Looks great for a jeep;)
hi, i ordered the same remote and the same receiver but i cant bind them to my trx 4.. Can someone help me out? thx!
Make sure you set the RX mode to S-FHSS. It will likely be in in T-FHSS by default.
Je suis pas fan de la marque Harley mais là les couleurs sont très belles
Josh why not an 8T CrawlMaster Sport in Brushed?
That’s not a motor I would run in this type of truck, you would need to gear down too far to keep temps safe. If I wanted that type of wheel speed, then brushless is the only thing I’d do personally.
After a LOT of research,,,, I spent a dime on the Hobbywing Axe Brushless system.. now you tell me I Fd up. Dang it!!!!!!!! Not matter what I buy,,, I screw up. I've noticed that you tend to recommend the high end expensive stuff. It would be great if you offered a low end comparable replacement as well. Some of us spent so much on a crawler that we expected would be great out of the box with our last few extra bucks we had to reach this level. Only to find out that we got sold out to the upsell. Not a nice thing at all. Sucks to be me I guess huh? How about some cheaper options with only a little sacrifice that we can make up for in driving habits?
You could have cut out the rest of the engine and glued it to the servo if you really wanted to.
I have always respected your opinion so I need to ask why you don’t like the HW Axe ESC motor combo for this vehicle I have used them in other crawlers with no issues, so is there something I’m missing
I personally don’t like the feel of them, specifically the FOC control. I know you can turn that off but then they are also low on power compared to other similar systems. They aren’t “bad” I just do not like driving them.
@@HarleyDesignsInc fair enough
The maxxis tires? It comes with Nitto tires
thought the same thing :/
Any rumors of a ready to run version from Axial yet?
Rich from Axial said on a live video that it will be a while
Need to teach a radio class man
The axle plastic pan hard mount breaks
Will my hitec 645mg (300oz) be enough for my scx3? And is over drive really necessary for “better” crawling?
The Hitec 645 is less than 200oz, I do not think it will be enough for decent performance. Overdrive is a powerful tool, is it something that you MUST have, no.
@@HarleyDesignsInc oh ok so get something that has 300oz of torque or more? And will those amazon 25/30kg($30) servos work fine? Any recommendations I’m on a budget Tnx for the reply Harley! 😁
You get what you pay for with servos. I don’t normally suggest the cheap servos often. But something around 300oz or more is my recommendation.
@@HarleyDesignsInc that’s a great rule of thumb especially when it comes to RC! Tnx Mr Harley udaman! 👌🏽
the tires are nitto not maxxis great review
What color is that ??
👍👍
What is the paint code for this color?
No idea, I had it painted by someone else.
Or you can drop a brushed 55t axial crawler motor. Slow and steady reliable torque is all you need.
🤘🍻🤘
Wait... The new one you just made... Is a scx 10 3... I'm confused
Hopefully they make a iii base version that doesn't include the option for 2 speed or dig for those of us who just want a trail truck but don't want to pay extra for those features. A well machined driveline without micro servos or spacers would be great!
Mine will be up on viperrc
Get your hand out from under there Josh.......lmao
It’s not a rear axle disconnect. That would mean the rear axle spins freely. It’s a rear axle lock.
You can set it to a freewheel position as well. And in the locked position the rear axle is still disconnected from the gear train.
THANKS for this Josh! 😎
That was a very thoughtful and thorough run through of this amazing new Rig!!
MAY I get an opinion from you? I KNOW I've been an ass in the past, but I really Respect your opinion on this subject....
Like most of us, I'm getting a Stimulus Check and rare opportunity to finally get my first new Rig in over 7 years! 😁
The "Boss" is giving me $450 to spend on it.
Now I could get the Element Sendero Kit, and Everything else to make it BADASS.....
Or the III, and enough left for Batteries, Motor, Paint and cheap 25kg Servo.
Please, I'm asking for help.
WHICH would you honestly choose, given you only had $450 to spend?
Most importantly, stay SAFE!
Carmine ✈🚂🚙
I feel like that could be a tight budget to get the SCX10-3 done. However the build of the 3 is a lot more fun. The Enduro is a simple truck that gets the job done, but if you’re going to end up building more than driving, then the SCX10-3 may be the route to go.
@@HarleyDesignsInc That's fair.... I just thank God that I've got a little time to think before the Check gets here. 😖
All I've got for starters is a couple of HH Brushed Motors and a 4 Channel Radio.
I'm just sick of hearing "Get a TRX-4" all the time! 😠 I don't want one.
.... One even said "Get a Vaterra Ascender!!!" 😲
See why I wanted YOUR input?
Like you, I'm a Builder. I enjoy Kits, but more than that, MODIFYING Rigs.
I LOVE the III! Just the Videos alone get my mouth watering.... It really looks like Axial sat back, watched the upstarts have the Market - then went to the Drawing Board with a clean slate!
(Though the Capra was a great teaser!!) 😁
If they quickly come out with a Single Speed, Straight Axle Kit, with Dig - for even CLOSE to $300 - it would be a no-brainer.
The Element ISN'T the consolation prize for me either.
I think it's quite a nice Rig out of the box - WITHOUT that Body. Which makes the Kit ($239 at AMain right now!), the perfect platform for a Frame up build, with a Chassis that's NEARLY as LCG as the VS4-10 Pro!
(Which is DEFINITELY on my list after my HUGE Inheritance! Someday)
Maybe I can get the Wife something EXTREMELY thoughtful for a gift.... And get my budget raised to $600!! 😉
Thanks Josh! Please stay SAFE! 😷
Why don't u like the axe electronics?
I thought they were nitto tires
Yup, I misspoke was all.
You need the Harley Quinn figure driving it, Or in the passenger seat
Who did the paint work?
sootsscalepainting.com/
@@davekastner3590 thank you
They are nitto tyres. I’m sorry I’m sure someone has already commented this but yeah.
13:39 “straight axle version??”
Darcsyde Racing it’s mentioned in the manual and Axial employees said it’s coming, but no official announcement yet.
I think a scale truck should go at a scale speed, it doesn’t need to go 50 mph.
Why no mention of Team Brood motors? They are good motors too .. and actually answer back to email replies unlike ...... 🙄
👍🏽🐒🇺🇸
Harley’s Jerp
This is how many times Josh put his hand under the truck
👇
I'm just here to read shirt comments. 😜
Fuck I am new to RC cars wanted to build one of these but when all said and done looks like it can cost $600-700 I think a traxxas trx 4 would be better for me