2015 Ford Edge Electronic Parking Brake Maintenance Mode Procedure

Sdílet
Vložit
  • čas přidán 21. 05. 2021
  • 2015 Ford Edge electronic parking brake maintenance mode procedure to service the rear brakes
    #ford
    #electronicparkingbrake
    #autorepair
    #edge
    #maintenancemode

Komentáře • 20

  • @XBLJipzi
    @XBLJipzi Před 3 měsíci +2

    You’re the man

  • @gullonancy
    @gullonancy Před 2 lety +3

    Very helpful. You saved us a lot of time and money

  • @nickburmer5229
    @nickburmer5229 Před 2 měsíci +1

    Thanks for sharing

  • @nandakumar3452
    @nandakumar3452 Před rokem

    Thank u

  • @dylanschomer6301
    @dylanschomer6301 Před 2 lety +2

    I’ve had issues with a 2016 Mazda CX-5 parking brake the scan tool wouldn’t put it in maintenance mode so I figured out you can remove the electronic motor and service your brakes that way then reinstall I’ve had no issues and have done this to all makes and models

  • @Goldilocks924
    @Goldilocks924 Před rokem

    Can you drive it like this? It is scheduled for service but am waiting on parts. I need to disable this chime before I am 5150’d…

  • @traceries5201
    @traceries5201 Před 3 měsíci

    Hello. I had the rear brakes, calipers and rotors on my 2016 Edge replaced. After that work was done my parking brake malfunction light was on and flashing. The repair tech saw this but I needed to pick up the car. They said the parking brake is functioning properly and assume it is an electrical issue.
    My questions remains: there was no issue before the repair, now the light is on.
    I am taking it back to have them sort out the malfunction light. Any thoughts on why this is would be occurring? I’m not trying judge the repair guys but it is hard not to be skeptical when we errors arise from repairs.
    If you have time, your thoughts are appreciated.

    • @danthebrakeman
      @danthebrakeman  Před 3 měsíci

      If the tech says he followed the reset procedure, there's no reason not to believe him. The light most commonly comes on after a repair when the procedure is not followed it could also be a short or faulty actuator.

  • @WalkingJ
    @WalkingJ Před rokem +1

    Hello Daniel, will this method fix when it says Parking Brake Malfunction?

  • @dennyraymundo2380
    @dennyraymundo2380 Před 2 lety

    What if I missed this step before I replaced the pads

    • @danthebrakeman
      @danthebrakeman  Před 2 lety

      If you're not having any issues you should be fine.

    • @dennyraymundo2380
      @dennyraymundo2380 Před 2 lety

      @@danthebrakeman it's making a grinding noise after being changed.

  • @danthebrakeman
    @danthebrakeman  Před 2 lety

    If you're in the Cincinnati area and need brake repair check out theautollama.com

  • @kenycewescott1295
    @kenycewescott1295 Před 4 měsíci

    So confusing do you still have your foot on the gas?

  • @leanneschelert9913
    @leanneschelert9913 Před 3 lety +1

    I have an alarm that keeps going off constantly related to the parking brake. Any ideas?

    • @danthebrakeman
      @danthebrakeman  Před 3 lety

      Honestly not sure with diagnosing it. You can try to run through this procedure and see if it will reset.

    • @zachgoodwin633
      @zachgoodwin633 Před rokem +3

      Did you ever find out what it was? Mine keeps beeping at me saying release parking brake when it’s not

    • @brittanyelliott118
      @brittanyelliott118 Před rokem +1

      Same here.