Make A Leather Smartphone Case At Home With Wet Molding
Vložit
- čas přidán 2. 04. 2020
- This is 100% Leather, not a leather layer glued on a plastic case. By soaking the leather in warm water it becomes soft and can be shaped to a good degree with just a bit of pressure. The best part is that the leather then holds the shape once fully dry and also becomes harder and stiffer.
3D modeling and printing is a great way to make molds at home, some parts could have been easily made out of wood with just few tools of course and would have done the job just as well or possibly better.
Thanks to MilD_26 for the case model of my smartphone: www.thingiverse.com/thing:415...
I did not model the phone all by myself as I don't have calipers at hand. But of course it can be done if you want to do this and can't find one online.
This is the Fusion360 file if you want to take a closer look at the press parts:
a360.co/2xJXM2k
For those asking where to find tools:
I bought mine some years ago when I was starting to make leather sheaths. I went for the cheapest I was able to find. Have been working great so far! Can't find exactly the one I have but I listed some in my amazon storefront that are pretty much the same and any similar ones will work aswell.
www.amazon.com/shop/blackbear...
It's affiliate marketing so if you order something from here you'll help the channel for free! Thank you!
Index of operation and materials:
0:15 3D models made in Fusion360, nothing complicated just a 2 part mold
1:00 Parts are printed in PLA at 30% infill with a CR-10 3D printer
1:40 Untreated leather
2:00 Smartphone outline marked
2:30 Relief cuts to help leather form around cornerd
2:50 Soak in warm water for 10 min or so
3:30 3D printed parts press the leather into shape
3:50 Leather is left to dry overnight under pressure
4:30 Trimming excess with box cutter
4:50 Rounded corners looks better
5:20 Marks left by 3d model determine position for camera and lock holes, then punched out.
5:40 Charching porst and audio controls are cut out for access
6:00 Dremel with sandind drum used to smooth all cut corners
6:30 Fixing two corner where I cut relief too deep with ca glue
6:50 Sanding to 400 grit
7:00 CA glue is used to stiffen the corners (most probably not needed)
7:40 Dark brown leather dye applied in two coats with regular brush
8:30 Fine steel whool is used to remove some of the brown dye, looks better to me
9:00 Matt leather finish is applied again with regular brush
9:48 Satisfying snap!
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproject.com/
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects - Jak na to + styl
If you want to know more about this be sure to check description, I always write detailed list of operations and links to products used.
If you like what I do consider supporting me so I can keep on making, join as channel member or check my Patreon for early access and voice-over edit of my videos. Thank you!
What is the cat's name?
Hey, would be nice to see a big and old axe being restored and transformed into a Fireman axe with a dark wood handle or use a dark oil. 👏👏👏👍
you'r the best dude
I'm a follower from morroco
make a black pearl bottleship
make a black pearl bottleship
Much respect for showing your mistakes. We all make them, it's how we learn.
More interested in his excuse for the off centre camera holes. Mirrored is excusable, off centre is not.
Toby Bardon Dont look for mistakes. You can't even do one of his projects. LOL
@@mustachgloria6445 lol
Honesty goes a long way, especially when admitting your mistakes. So do cute cats! I love the head kiss as you put her down.
No one would have ever known that it was mirrored. Nicely done regardless and you have a unique cover now.
When you were painting I thought "oh he's left handed??" and then it was answered at the end. Thanks for sharing!
I noticed when he was cutting that he was using his left hand. Since I know he's right-handed, I looked at the cutting board logo in the upper right and saw that it was backwards. Immediately, I knew he had goofed on his printing process. Kudos to him for owning up to it at the end.
The mirror shot at 11:22 with his cat on his arm just made my day. Thanks a lot
sameee
And the lord said "You can NEVER have too many clamps!"
plunder1956 The ClampChamp
Amen
It's so true it's not even funny :))
😂😂😂😂 never, NEVER IS SO MUCH
I love it!! Lots of respect to you for not giving up and being open about your mistakes.
An enormous THANK YOU to all CZcams content creators for providing all of us with additional content during this very trying time! I can only speak for myself when I say you are helping me retain what little sanity I have left having been sheltered in place for the last 2 1/2 weeks!!
I love how simple and yet immensely satisfying Leather working can be.
It takes a lot of
humility and will to learn to assume some mistake like you did. You do a great job, and so it was with this project in particular.
Appreciate the honesty and time you took to make the video!! Thank you for the tips!!!👊🏼🙏🏼💪🏼
love it, the twist at the end just made me chuckle
Good work, brother! I think we can all appreciate crafters/artists who show that they're human and make mistake like everyone else.
Thanks!
It's amazing! Even with that "mistake", you did a awesome job.
A superb leather case... Extremely well made... WELL DONE!!! 10/10
Printing your own molds was really slick
That turned out awesome no matter which way it is
Man whenever youre able to get more leather like this I would love one for my pixel 3. Even though I love OtterBox to bits when it comes to phone cases, the leather case you made for your phone is just too awesome. :D
Respect for a man who admits his mistakes and owns them. Thanks for sharing. Stay Safe.
I like that not only did you admit your mistake, but that you modified the video and waited till after to admit it as not to distract from the project, that alone deserves respect even if you didn’t admit it afterward
I liked at the very end of the build when each corner of your phone "snapped" into place. Perfect fit and good job!
What a wonderful idea, I would love to try this myself. Nice job!
Thank you SO MUCH for this video. Sharing your learning process is something I won't forget and a printing error I have made myself elsewhere. Thank you!
it is always nice to see something good came out during this MCO time.great job bro
Honestly this case is better than the $80 case saddleback leather try’s to sell. Super nice job! Love it. Keep on keeping on and you stay safe as well
Thanks for the honest work. Be safe, dude!
You got a thumbs up for your honesty as well as your talent.
Big fan and cracked up at the end! Love your projects man, keep it up!
Thanks for your honesty too!
Excellent! I've been wanting to make a case that way for years! Great way to reinforce the sides with CA! And fantastic trick with mirroring the video!
This is gorgeous!
Very interesting! Thank you for the process!
Great idea with the glue. I was pretty sure that a wet formed case by itself wouldn't be hard enough to clamp around a phone, but with this it actually works!
Nice project, and a great mixture of 3D printing and leather crafting. Thank you for posting this build even though it was inverted. Take care, Stay Safe all the best to you and your family.
Wow Dude, that is awesome. This is awesome! Someone admitting their mistakes is a sign of an honest and responsible person. From the looks of it, this mistake ended up being better for you. (because of the selfies)
Great project! Quality craftsmanship!!
Incredible !! Your skills have no limits
Take care !
Still turned out well buddy. Thank you! That is an awesome idea!
Love your craftsmanship 💯
Beautiful work, congrats. I respect your sincerity.
We've all done stuff like that.... Luckily, no one was filming me, on some of my projects..... Very honest of you.
Cool project!
Excellent job, and as usual, very good work.
Love it. Thank you. Thanks also for the info at the end also!
Your projects are always creative and your attention to detail is apparent in your work. The confession (lol) in the end of the video not only showed your craftsman's self-criticism but also added information that was very helpful. Love your work, definitely an easy subscribe!
Awesome, I just wish I was as skilled as you are. Thanks for sharing!
Loved the honesty in the end of the video! +1
Love your work!!
Super cool build, despite the little mistake !! This is my fav leather project you have done so far !! Keep it up
beautiful cover
Brilliant. Thank you
I just discovered your channel a couple days ago. Very nice work.
this is so satisfying to listen to
Muy lindo y claramente explicado. Gracias.
I'm subscribing because of the confession at the end of the video. The project pulled me in and I enjoyed watching all the steps. This is a very satisfying piece of functional art to see created.
You are definitely a master craftsmen ' that is the best looking case i ever saw ! Thank you
Great job as always and great sincerity as always too.
Grazie mille de Francia
You are the coolest human. Stay safe. 🤘🏾
I love the trice with the tape to make a border... will be using that and calling The Black Beard Technique
I was need to inspiration for a new video project but now you give me inspiration!! really awesome Black Beard Projects thank you!!!
Bravo !
Perfect job 💪
It's okay man I like it either way, you are so talented, anyways stay safe man I hope you have a great day 👍🏻
Complimenti per l’idea, l’esecuzione & gli utilissimi consigli finali.
Bravóh!
Thanks so much for the guest appearance of your beautiful cat. He should do a guest spot more often.
I could fill you doing a chef's kiss after you got the case out of the mold :)
Very nice project and I appreciate your honesty and guidance! Well done and Thank You My Friend👍
Well done. Super cool project.
Sweet job.
Fun learning new stuff.
Cat looks happy.
👍👍👽
Very Talented and Very Good Work. Thank you
Really nice work, I love the look of this even the back to front logo 👍 😊
Ottimo lavoro come sempre! Un abbraccio a distanza :)
Not all projects turn out as expected, but a super cool project still!
I love the idea. I want one!
Another cool project! I’m starting to think you can do anything you set your mind too. Great job! The mirrored text is quirky cool lol.
Now that was cool !
You just invented the branded selfie phonecover.
oh, he remembered to mirror the mold! Nice! :D
Mate don't worry about it just proves the best of us can make mistakes. and believe me you are one of the best.
so stay safe .cheers from Australia.
Turned out great! I've been designing and printing lots of cases but recently got interested in leather crafting so I've been wanting to make a leather phone case for a while now. I was wondering if you scaled down the printed phone slightly to make the case fit tight enough, or was that not necessary?
The quirky nature of the text is what makes the case totally original. I would be so happy if my case looked that good. Totally well done. I need to make a scabbard for a knife that I am making. What I have seen here will help me, Thank you for the post.
Hey man, I like the style of your videos
Keep up the good work
That was HILARIOUS! I was wondering why the buttons were on the wrong side of the phone! Great. Thanks you uploaded it!
jesus christ you're talented.... aloha from hawaii... beautiful piece... love the cats. 🌴🤘😎😸
Manualità eccellente. Fantasia ed attitudine pazzesca. Sarebbe bello poter possedere un tuo pezzo! Complimenti davvero!
I really enjoy your projects. Also, the amount of clamps you used made me laugh. Stay healthy.
I love your videos, you make awesome content, and your commitment to your english followers is deeply appreciated. Things in Italy must make things even more difficult on top of being a creator, so I appreciate your content even more. From the US, thanks.
Woa you’re amazing ❤
unique cover !
Thank you for sharing☺️☺️
A+ 👍🏻👍🏻 awesome 👏🏻 well done.
Molto più figo così! Bravissimo!
awesome work
It's a beautiful cover nonetheless, as you said, perfect for mirror selfies. Thanks a lot for showing your mistakes, it's very inspiring to see, we can learn a lot from failure, even though your final product is flawless.
Voce e muito humilde bravo continue voce e uma inspiração pra min aqui no Brasil.
Great work ♥️👏👏👏👏
Amazing!!
Awwww. No problem buddy☺️ it's really nice job👌👌👌
looks good brother 😁👍
Great job Brother