5 TIPS To Make Your FPV Drone More DURABLE
Vložit
- čas přidán 7. 06. 2024
- Shawn gives some insider tips on how to make your drone bulletproof.
ROTOR RIOT!
#FPVFREESTYLE
- - - - - - - - - -
Support Rotor Riot by purchasing from our store:
rotorriot.com/?aff=1
Want to fly FPV like the pros? Start here:
rotorriot.com/pages/beginners...
Want to start off in the simulator first? We've got you covered:
rotorriot.com/products/fpv-re...
Get Pre-Built Drones here:
rotorriot.com/collections/ful...
Get Rotor Riot Apparel here:
rotorriot.com/merch/?aff=1
Get Rotor Riot Motors here:
rotorriot.com/hypetrain/?aff=1
Check out the latest FPV Parts on the market:
rotorriot.com/new/?aff=1
- - - - - - - - - -
- FPV Freestyle Pilots / Hosts -
Shawn Morrison [Let's Fly RC]
/ letsflyrc
- Production Team -
Drew Camden /Caleb Wright - Producer
Dan Maffett - Editor
MUSIC:
raspberry- the hip hop
Boomopera- LoFied
www.rotorriot.com/?aff=1 - Zábava
Tip 1 - build and hang on the wall 😎
I uses hockey stick tape to protect my wires on the arms, its really abrasion resistant and light weight, plus comes in bright colors, a roll last me a long time, i use 2 layers and put a drop of super glue at the end to prevent it from unraveling, ive never chopped up my wires since...
Bro i just did the same thing. Not super glue yet but mine was advertised for baseball bats, and has "ribs" if you will. It probably even dampens some motor vibration up the arms but i wont really know until i put fresh props back on.
@@TavoFourSeven yeah it definitely can help with vibration dampening too, but i usually run a pretty stout frame so vibration hasn't been too much of an issue
Tip nr 4 - just use racewire
it also helps if you need to replace a motor
I don't run an action cam, but I do like the idea of a battery protecting TPU skeleton bolted down in the front and extending over the battery... Time to bust out CAD.
There's diamond braid rope that i take the core out of and slide over my motor wires then use a zip-tie to secure them to the arm. I've never had one fail me and have been doing it that way for over 2 years. Also, I noticed the capacitor on your drone is hanging out the side by the props just asking to be knocked off. One trick that I've learned to combat that is to use some small wire extensions solder to the leads of your cap so you can place it in a more protected spot and the flexible wire also helps protect the leads from snapping. In frames with enough room for the cap to be placed standing parallel next to a standoff i will use a zip-tie to secure it around the cap and standoff which seems to provide the best results. Last thing, secure the battery lead at least 2 spots on the frame with zip ties, it will save your fc pads from being lifted and your wires from getting chopped.
Never would have thought of using a go pro mount with no go pro , thanks letsflyrc I always love your content
What is the weight of this build with all that protection?
Sorry, I didn’t weigh it. If I remember, I will come back and reply with the answer when I get to a scale. :)
@@LetsFlyRC I don't mind heavy build but im curious 😊
Dude you are awesome! Thanks for the tips.
Thanks for the kind words. I hope they help you. :)😊
Props out - single-handedly the best crash-recovery move I’ve made.
Fire video boys!
do you have a design for a fullsize gopro, like a 9? I like the idea of maximum protection
if you mute this it looks like youre trying to rap.
🤣
That’s hilarious. Gotta put in some rap beat and watch it on silent. 😂
A Walksnail system in a Rotor Riot video? Nice.
Where can we get some of the 3D files that you use?
Get a tripod. 🤙
wherecan get the 3D products, i have your tanq frame, building it no. Good video, being a newbie, durability i important, thus i got your tanq.
Zip tie the power wires to the frame, so in a crash the wires and their pads are not stripped from the esc
thanks
nice
Front bumper !
That thumbnail, tho. 😂
@LetsFlyRC I uploaded a 3D model remix of the TANQ Arm Protectors to fit the Fly High FPV LED strip through and made them thicker. Get yourself a LED strip on that thing! 🚨💡
@@Monty_FPVwow, what???? That sounds really cool. I’m going to look that up. 🔥
@@LetsFlyRC it's up on printables! I'll add it to your thingiverse in 10 minutes. 👍
Спасибо бро 👍👍👍👍❤
1st! Boom.
is it me, or is the audio enhanced with ai?
First
6. 3D print some TPU props :)
I did once and I still can't believe they worked first time.
See 52:42 mark in "DJI drone gets FCC hack. FrSky promises HD FPV system? (FPV News with JB and @ItsBlunty)"
We printed some of the “quiet” props and they lasted a few seconds. And exploded. 😂 😊