Adjustable Circle Cutter || Drill Machine Attachment || Chandrabotics
Vložit
- čas přidán 28. 05. 2019
- It is a very useful drill mechine Adapter. In this video I have tried to say how we can use variable circle cutter as drill machine attachment.
You can buy this:--
Digital Craft 30mm-120mm Alloy Steel Adjustable Circle Hole Cutter Set with Plastic Wood Hole Saw Drill Bit Tools Hex Key for Woodworking www.amazon.in/dp/B074FVGG5Z/r...
Share, Support, Subscribe!!!
Subscribe: rb.gy/zau1eu
CZcams: / chandrabotics
Twitter: / chandrabotics
Facebook: / chandrabotics
Facebook Myself: / mechandrachur
Instagram: / chandrabotics
About : Chandrabotics is a CZcams Channel, where you will find technological DIY videos.
Innovation with little bit of Investment. Prioritising use of easily available materials. Could be Implemented from Home Environment.
One security advise for everyone. You must be so careful when you will use this tool. Please take safety precautions because safety is the NO 1 priority 😊
you don’t mind your fingers, you’re working dangerously.
Untuk bor mini masuk ga yah...3mm
What is the use of that other metal stick which was put at drill bit's palace. The one you were leveling with cutters
The Company may try this: First get the circle mark on wood with single cutting (side) bit. Then only insert the other side bit pointing to the circular mark and tighten the screw with allen key to get radius and depth accurately aligned.. With 2 cutting bits work may be faster and smoother. Of course, this video takes me back 40 years when I used to cut 7-8 inch dia holes for speaker boxes, with single cutting side bit..
can it be used for 2mm thick sheet cutting ???....
If you're going to burn your way through wood why not just buy a box of matches!!
👍
इसके कटर ब्लेड्स नही मिल रहे है kha मिलेंगे
I want only blades
I asked the question: "CIRCLES for METAL" and you represent me for WOOD!?, BARABE, and by the way they are not in quality because the OK key is processed in the screw head so it is not possible to move the knife!?, ...
I have done very similar with woodglut designs.
If it's giving smoke while cutting holes ......that simply means
Sir isase 15 inch ki cutting ho sakati hai kyaa or isaka name ret bataao
Sar hame ye wala machin chahiye
Why don't you cut thicker wood like 2 inch
Safety first please.
Painfully slow - and you seem to be an accident in the making.
It's hard to use. Very loud, easily bounces back off the wood creating a dangerous situation, and you need a drill with the power of a V12 engine to cut anything but soft wood.
Online side send me drill bit name