2016 Honda Odyssey Aftermarket Alarm Removal

Sdílet
Vložit
  • čas přidán 27. 08. 2024
  • Removing the aftermarket deal installed alarm on the Odyssey after the alarm would randomly go off for no reason.

Komentáře • 17

  • @hinene
    @hinene Před 8 měsíci +4

    Thanks for making the video. I was stranded at a rest stop during a family vacation. My car wouldn't start, the blue LED started to blink, and i didn't notice that before. Car got towed to a nearest dealership and didn't want to troubleshoot it. After your video, i was able to bypass the starter cutoff. Spliced the wires and twisted them together, and my car was able to start. POS KARR system. Thanks.

    • @FriendlyMBTech
      @FriendlyMBTech  Před 8 měsíci +1

      You're very welcome! I'm glad it worked out for you.

  • @miket611
    @miket611 Před 9 měsíci +1

    Thank you for making this video!! I have wanted to remove this after market gimmick for years! Just did it and it was exactly like this video.

  • @emmcee476
    @emmcee476 Před rokem +2

    Removed it from a 2014 Toyota. Pretty easy. Remove all jumpers and rejoin the cut main power wire together

  • @timfrancis6774
    @timfrancis6774 Před 7 měsíci +1

    heres my story, bought truck alarm went off when we were on test drive brought it home anyway. 3 years later left me stranded several times. have to get it removed somehow i found this video so i will follow it. but, i have some questions if i may, will i need new wires or can i crimp cap the ones that are tied to truck wiring. like say my ignition is full of connections should i just get new ignition wires and such

    • @FriendlyMBTech
      @FriendlyMBTech  Před 7 měsíci

      I just had to reconnect the wires. Depending on how it was installed, you may or may not have to graft in some length of wires but I'd be surprised if you did.

  • @abdonmolina
    @abdonmolina Před rokem +1

    I might need that little flashing light, mine broke

  • @ESNK443
    @ESNK443 Před 7 měsíci +1

    Got a 2016 Civic LX had the same exact harness. I’ve removed the entire thing and rejoined the manufacturer power wire back together but I’m still stuck at 5:38. Lights come on but won’t even crank. Any idea what could be missing? I would appreciate any ideas.

    • @FriendlyMBTech
      @FriendlyMBTech  Před 7 měsíci +1

      Check the battery. Check the battery posts and terminals. Clean off any corrosion. Try jumping it or charging the battery with an external battery charger.

    • @ESNK443
      @ESNK443 Před 7 měsíci +1

      Cleaned them up with a small steel brush.Car battery reads 12.51 V by itself. But no luck. I’m beginning to think this is a programming issue or electrical issue.I had a new key programmed when the KARR harness was installed, then I took it off. Not sure if this could be a problem for the key programming.

    • @FriendlyMBTech
      @FriendlyMBTech  Před 7 měsíci

      @abrahamrobledo9682 I was having similar issues and my battery voltage was good also. I put a new battery in it and cleaned the terminals and it hasn't done it since. I have also heard of the alternator causing a similar concern.

  • @bernardgelderblom8818
    @bernardgelderblom8818 Před 2 lety +2

    Cut and join , some alarm fitters just dont care ...

  • @expeditionwaypoint7258
    @expeditionwaypoint7258 Před 2 lety +1

    Did this fix the issue

    • @FriendlyMBTech
      @FriendlyMBTech  Před 2 lety

      I did for a while. Then I replaced the module under the dash. That fixed it again. I forget the part number.

    • @cristian.robles
      @cristian.robles Před rokem

      ​@thefriendlyneighborhoodtec3727 which module did you replace?