Can the Avenger 85 handle some Miles
Vložit
- čas přidán 16. 05. 2024
- Welcome you Motorized Bicycle Junky, Family, Friend, and/or CO-Workers. Thank you for your support. I wanted to create these videos to showcase What’s up everybody! Hope you have been well. In this episode, I wanted to see how the Avenger 85 would do on a longer ride. Let's just say we have not been kind to this motor. I have taken the time to break in all my motors but not this one. We have been twisting the throttle back since the second ride hahahah. But hey, what can you do when time is limited and you need to get that Motorized Bicycle fix in!! Hope you all enjoy the ride!
You are officially in the 50 mile an hour club
Thanks, Kevin! Finally got there! Just watched 👀 you rip 20 miles too!!! But you hit thr dirt, hell yeah! 🎉🎉🎉🎉
Nice, I know the feeling. Feels like nothing under you.
Love it!!! ❤️ and yep!!!
Dam bro you were flying thanks for sharing brother ride safe
Thanks Mike 👍 it was the most fun I've had on a bike so far. Not the top speed but ripping the corners 🎉🎉🎉🎉🎉 hope to see you ride soon!!
Nice run bro great video was fun
Thanks beother! You and wizard have been ripping it up. Love it 🎉🎉🎉🎉🎉
That was a very fun ride. You were going fast with ease it seemed like. Keep it up
Thank you very much. The MZ65 pipe really helped wake this motor up! 🎉🎉🎉
Thanks for the ride. Retire those, come to Mikuni 24mm Island. Sits between 1975 and 1978.
Thanks, Leo!!!! I'm going to have to look a round for that mikuni 24mm. Is that a flat carb setup? 🤔 really need to learn my carbs 😩 😅😅😅. Can't wait to see you fly brother!!
@@grendelsgarage9723 nope, it ain't no flat.
@@leonardarolasounds good 👍 😋 😊😊😊
Yes man good run 🤘🤘🤘
Thank you! I think we finally it the mark. 🎉🎉🎉🎉 next carb upgrade!
I guess my question is what's the sprocket? 32? You definitely live in farming country with rolling hills and good roads, nothing too steep. And not all the traffic many people are plagued with 😅
I'm rocking a 36 toothed sprocket. I do on all my bikes. I'm very blessed with nice roads and little traffic 😌. And most people love seeing me on the bike, especially dad's when I drive by them. The town is built on a rolling slope, hence the 36T. Thanks for commenting and rip it up! 🙏
Nice ride! I haven’t gotten mine up to 50 yet but I’m right behind ya!
Hell yeah!!! Keep at it 💪 👏. I think the carb might be the biggest factor in this puzzle. 🎉🎉🎉 ride safe!
@@grendelsgarage9723 I think I got to widen the exhaust it’s got a poo poo attached to the expansion chamber on my hybrid
@4514rooster I've seen some guys on the Facebook post raising the exhaust ports and Transfer. 🤔🤔🤔
@@grendelsgarage9723 I did that with this Chinese engine it works a lot better
Amazing 😍👍
Thank you very much. We will keep ripping it up🎉🎉🎉🎉 ride safe! 😊
I finally got 50mph out of mine. And got gps proof lol... Great ride man be safe
Oh hell yes!!!!!! Did you have to use a upgraded pipe? Let me know congratulations 🎊 👏 ❤❤❤❤❤🎉🎉🎉🎉🎉
Nice ride I've been watching from the interdiction of your avenger 85 and the up and down so I've just tested a vm18 carburetor on my phantom 85 and sir it's one of the knock off but copy to the best level the real one is about 120,00usd so my 48,00usd is just right for my pockets it's the best upgrade by far better than a bofang cab💯👍
Thanks so much for the support 🙏 ❤️ 🙌 😀. Yes, ups and downs describes this build. Hell ya! I'm happy the vm 18 worked 💪 for you. I'm going to slapp on a Nibbi PE 19 on her. A lot of people say an upgraded carb makes a lot of difference. 🎉🎉🎉🎉 ride safe 🙏 and rip it up!!!!
I like it👏🏾👏🏾
Thank you! I would have to say, that is the most fun ride I've had on a motorized bicycle 🚲 😀 .
48 mph....taking it easy Lol 🥳🥳🥳
Blhahahaha. That made me laugh. Thanks. The Avenger 85 is legitimate and would recommend to anyone.
Oh yeah bro 51mph🎉
Thanks! Finally got there. 🙌 I'm not going to lie, it was a rush 😅😅😅😅. Ride safe!!
@@grendelsgarage9723 keep going bro. There are very few that's got the V85 over 50mph with phone gps video proof.
@@SuperTrikeBicycle.Thanks brother 🙏
hell yea and that's with upgraded head and pipe, stock carb still, and unported cylinder? Try upgrading the carb, you should be able to get some more mph. Porting also.
Hey thanks brother 🙏 ☺️. I'm going to put a Nibby 19 on her (it's what I have) and see how she does. No porting yet. I just did my first porting job on the Wild Cat 80 and am hoping to get it on the F-Zero soon! Your video on building a motorized bicycle has helped me a lot. Thank you 😊
@@grendelsgarage9723 can I invite you to discord? Also it seems that my comment got deleted or hidden or something by youtube. What's your fb
Good stuff but where's your gloves ?
You are 100 percent right!!! I was ripping down that hill, and that same thought hit me. 😅😅😅. I truly love these comments because I hope people read them and upgrade their safe gear. Thanks Robert 👍 rip it up!!! 🙏 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
What do you think about the internal components of the engine? - the 'Raoul Duke' channel recommended to swap the stock needle bearing with a wide V3 Phantom bearing.
hey man , i have an avenger on the way and i see that you have been working out all the little kinks as you go. i was wondering what would be you advice to a new owner of one of the engions ?
If this isn't your first motor, then you know the basics like cleaning the piss put of it with a solvent, I like to use gasoline for a few rences. Then I rinse with a gas and oil mixture to put oil back into the bearings. next, the biggest concern with the Avenger 85 is that you need to determine your piston squish gap to avoid the piston hitting the head. After that, you should be your Magneto gap as well.I do know some have come a little off.I did not have this problem.I hope this helps great luck to you.Keep me posted brother🎉🎉🎉🎉🎉🎉
What are you feeding that thing?
Straight up the Avenger 85 is a beast 💪 😤 👌. I can't wait to see what it does with a proper card. Thanks for watching 😊🎉🎉🎉🎉🎉
😂 talk about speed
Thanks!!! Finally, hit the 50mph mark. Now I just need to port an 80cc and China girl and hit 50. Thanks for watching 👀 😊😊
@grendelsgarage9723 your welcome brother one day I might hit 50 Mph ,
stay safe
What pipe do you have on the engine that doesn't sound stock
I'm rocking the gomax industry MZ65 pipe. I had to bend the hell out of it to fit the bike. I was hoping to put this motor and pipe onto the F-Zero, but the header is way too short unless you use the U bolt mount and change the petal crank gear to a much smaller one. 🎉🎉🎉🎉🎉 thanks for the support 🙏
Chain is waaaay too tight, could cause your bearings to wear out prematurely, everything else is solid tho
I've been wondering that. I was watching some dirt bike guys and they were talking about having a chain to tight.. I didn't know the information about the bearings running out faster. Thank you very much! Great info 👍 👌 👏 🎉🎉🎉🎉🎉🎉
51 downhill 😮 do you have the stock Huffy or Kent back wheel
Thanks 👍 😊. They are some after market rims. The Banshee Queen is a Schwen from I believe late 90s. I bought it from a guy with a 50cc motor in her for 150. Got supper lucky. Personally, I stay away from aluminum frames because they shake so much. But you got to run what you have. That's not counting frame with the build in tank.
What engine should I put on this MTN bike build I’m working on to get a higher MPH?
It all depends on your end goal my man. I do feel that the Avenger 85 is the most bang for your buck. From what I can tell, it's not the most Torquy motor, but it will flat go ones you're going. I think the minarelli still is king 🤴. Just note that I haven't ran one.
@@grendelsgarage9723 I just want to get it up to 45-50
@@4514rooster I think you would be very happy with the Avenger 85 then! 🎉🎉 let me know if you get it!
@@grendelsgarage9723 I lyk when I do!
I dont get it i have the same carb and everything and the fastest ive ever went on any of my bikes is 36mph
Do you have an avenger 85 motor?
@@sasquatch_886 no 2 yd100s but ive seen people with yd100s that go just as fast
@@theLyzhendricks Heavy modifications on the motor. YD100 takes a lot of work to get to those speeds. A shit ton. Avenger 85 can get to 30-40 stock. Some simple mods or upgrades and you’re looking at 50mph
Bro this the 85 I was talking about lol
Straight up, I am not a fan of the Bo Fang. I'm running it because it can with the kit. They struggle with air flow, so try removing the air filter. I've not ran a YD 100 so personally, I can not say. I do think sasquach8869 is correct. They are work...
How😢
Avenger 85, smolik performance 2mm spacer and performance head, gomax mz65 pipe, and 72 jet. I'm here to try and help. 😊😊😊. Idk if it matters but I bought mine from Ken Hinson from Facebook.
Nice ride brother but i would like to know what jet are you running in her now. She sounds awesome 😊
Hey, thank you very much 😊. I'm rocking a 72 jet with the Bo fang carb. I'm going to put the Nibbi PE 19 on next with the smolik performance intake next.