Land Pride RCF2060 - Is this the right Rotary Cutter for you?
Vložit
- čas přidán 21. 08. 2024
- This is a review, setup and operation of the Land Pride RCF2060 rotary cutter or brush hog, if you prefer. The demonstration of using this cutter is some very tall and thick grass that was very wet. This is what I cut on a regular basis. This is a 60” wide cut and I use a New Holland TC45D tractor which is 45hp.
Correction on the tractor horsepower. 20-65hp is the recommended horsepower rating according to the manual.
Created by InShot:inshotapp.com/...
Make sure you’re running the tractor at 540 RPM’s and the rear of the cutter needs to be higher than the front to allow for discharge. Great video for a beginner.
another great video mike. it did wonders on the meadow!!!
This area holds water pretty well. When grass is that wet, it takes a lot of power to get it cut and down. This hog has been a workhorse, no doubt.
I like your quick hitch system. I'll have to look into that for my TC33D
Hello Project Nine Oaks! The Pats System has been one of the best purchases I’ve made. It makes hooking up anything to my TC45D a breeze. Especially when I’m by myself. Thanks for watching and commenting! Here is the link to Pats. www.pats3pointhitchsystem.com/page/7229
Looks like a great brushhog
Thanks David. It does a great job making things small. Thx for stopping by! WST
You're very descriptive and knowledgeable in your reviews. I like it. Only wish you were into skid steers, I could learn a lot from you. Nice video Mike. 👍🇺🇸
Hi Gary, hope all is well. I would give you my tractor and all the implements to go along with it. I would take your Cat in exchange. Then I could tell you all about it. Email me if you are interested 🤣🤣 I like watching vids of things I don’t own. That’s how you learn. Thanks for watching and for the kind words. WST
GLAD TO SEE THAT IT WAS BIG CLUMPS OF WET GRASS & NOT GOFERS OR GROUND SQUIRRELS... I WAS THINKIN, WHAT THE HECK IS HE MAKIN DISAPPEAR UNDER THERE??? THEN I SAW ALL THAT WATER AN HAD AN A-HAW MOMENT... STAY COOL MIKE... PEACE...
Mr. Pines, how we doing?? Wasn’t hiding anything but chunks of wet grass. Would make a fine green shake for someone I’m sure of it. Thanks for stopping by and commenting. WST
@@WSTMike I KNEW YOU WER'NT MAKIN MEAT PIE... JUST BEIN SILLY... KEEP PUSHIN ON PEACE...
@@gringopines3476 LOL! Peace, brother!
Well presented video with good information. Thanks.
Hi David. Glad you enjoyed the video and found it informative. I spent 2 1/2 hours brush hogging this weekend. This unit never disappoints. Take care and thanks for watching! WST
Nice Land Pride Mike! I’m not sure about the operator, but the shredder did a good job.🤣 All kidding aside that was some thick grass. Sure put it to the test. Thanks for sharing.👍🏻👍🏻
Dear Mr. Lacy, the operator is a moron. Let’s agree to that. Please don’t fight me. Went to school with him back in the 90’s. Grade A idiot. Now that the self deprivation is over with, thanks for the “nice” comment. Take care, brother. WST
@@WSTMike You crack me up Mike 🤣🤣
Nice review Mike..
Hey Mike nice looking hog you have there looks really similar to mine except for the brand and color. I have a Woods Brushbull I think it is rated for 3 or 4” material but I try not to push it. Thanks take care, Ben.
Hi Ben, great brush hog you have. Couldn’t find any dealers local to me for Woods. Ended up with the Land Pride and that wasn’t bad at all. The Brush Bull was definitely at the top of the list.
I’ll try not to leave any more offensive comments from my other channel. I hope no one was offended. My apologies.
Not sure what you are talking about. Unless you use a Stihl ? JK
All good around here man. WST
@@WSTMike I seen where the comments I made earlier from my other channel where being held in private and couldn’t be seen by other channels. My heavy thick and wet must have been worse than mydicksadrill! Lol!🤷🏻♂️
@@Yeradumis420 Gotcha. Well, no worries here. This isn’t Little House on the Prairie. I always mark my videos not for kids. Thanks for commenting. All good with me.
If a 'bolt magnet' is similar to a 'chick magnet', then yes...that I am! Hahahahaha. Nice review, I have a Brush Hog on potential future attachments list so appreciate the info.
Hey Shifty, a bolt magnet has a larger magnetic field, therefore, better than a chick magnet, not to mention “cheaper” I am glad you found the review helpful. Wouldn’t know what to do without it. Take care and see you tomorrow night. WST
On my Land Pride RCF 2072, greasing the rear u-joint on the pto drive line is a real pain in the rear.... any suggestions? Good video and I especially like the close-ups and audio! Thanks.
Hi Durwood! Glad you enjoyed the video. I will agree with you that there is no easy way to grease the rear PTO driveline. I have seen grease zerks that are extra long. It would make it a bit easier to get to. I’ve not done it personally. If you beat me too it, let me know how it works. Personally, I grease it once a year for 3-4 months use. I just deal with it. If you are in a southern climate and would use it more than I do, that extra long zerk may be the trick for you. Happy 4th! WST
Can you tell me why somebody would want to use this set up instead of a zero turn lawnmower on a piece of land like you're cutting?
I just had a Kabota tractor with this brush hog passed down to me. I have a lot of grass to cut.
The Kabota came with the backhoe the rotor tiller the brush hog mower deck and the box grader.
I haven't tried anything on my yard yet but I'm considering trading this set up in for a nice 72 inch zero turn lawnmower.
Can you offer any advice?
Very good question. I have a commercial 72” Grasshopper mower to cut 2 acres. As good as this mower is, it won’t cut what I’ve shown in this video. The grass is too thick and heavy, especially when wet. That being said, if you just have average grass (lawn) then a 72” commercial grade mower would be better than a brush hog/rotary mower. Do NOT use a those for regular lawn; it’s not the same. That is a very nice package that was handed down to you. You’ll have to decide based on the info I gave you what is the best set up for your land. WST
Good video!! So my tractor is 26 HP how many feet rotary cutter is fit for my tractor) I am rookie
Thanks for watching. You will be in the 48” or 4 foot range maximum. It should fit nicely with the width of your tractor. Take care! WST
I'm using a RCF2060 on a B26 Kubota, works just fine. I like that the deck is just a bit wider than tire width makes it easy for cutting along fence lines.
I have a rcr12(which is like the lowest model) and I already have 2 dents. One came from trying to back over a small 1” tree and I watch the back plate bend. My rotary cutter is used for a hunting lease. There is stuff that gets 7’ high. Do you think this rotary cutter would be a good upgrade for me and could handle it? Also can you take the back off? The brush I cut is so tall it will get jamb up. I have to take the mulcher off the back so it does not bind up.
I do think that what I use would be an upgrade. The gauge of steel is thicker than RCR. You also can take the wheel off, just not the welded mount that the wheel attaches to. Let me know if you have any more questions. WST
Wood, Sweat and Tears
Thanks for the reply. Im hoping I can talk to my dealer and work out some deal to swap it out for your model.
@@ericr2415 Best of luck with your dealer.
It's not supposed to be level. About 1/2" higher in the back. Sounds like it's clogging and making that slamming noise like you hit something.
Super thick grass and it is in standing water underneath. This field is always very wet near the river.
I Bought a new RCR1860. It had vibration issues from the start. Reported it right away and they offered to help but never did. I left a bad review on their site and they were fast to respond. More promises, no follow up. Three times this happened. Said they would have a regional representative look at it. Three times they made that offer but have never followed up with it. Awful customer service. I offer this to help with any purchase decisions.
Sorry to hear that you had a bad experience.